Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of Lime concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 4 | Taking down chowkats or frames area exceeding 1.50 Sqm andnot exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 5 | Material & Labour for Non - skid coloured ceramic tiles 400x400x 7 to 8 mm thick (square), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed. |
| 6 | Material & Labour for Coloured glazed ceramic tiles in vertical surface 300x 450x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed. |
| 7 | Material and labour for prepolishedkota stone slab flooring of size 550*550*18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, over and including cement screed bed 15 mm thick in cement mortar (1:6) baseincluding rubbing and mirror polishing, and half nose moulding (bull nosing) etc complete all as specified and directed. |
| 8 | All as per item No. 7.00 but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) onbrick work or concrete surfaces, complete all as specified and directed. |
| 9 | Material & Labour for Granite work (Jet/Telephonic Black) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 10 | Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection complete all as specified and directed. |
| 11 | M&L PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete all as specified and directed. . |
| 12 | Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed. |
| 13 | Dismantling Asbestos cement (corrugated of semicorrugated etc), any gauge, thickness,roof coverings complete all as specified and directed. |
| 14 | Supply and fixing pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colourhaving 550 Mpa tensile strength as in roof covering/cladding and fixed with self tappingscrews, complete all as specified and directed. |
| 15 | Supply and fixing pre-painted galvatume aluminium zinc coatingGI based plain steel sheet 0.50 mm thick of any colourhaving 550 Mpa tensile strength as in roof covering/cladding and fixed with self tappingscrews, complete all as specified and directed. |
| 16 | Dismantling unframed timber fillets,rails,posts,rafters,purlins etc under 40 sqcm in section complete all as specified and directed. |
| 17 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed. Material test certificate and authentication should be compoulsory provided by the manufacturing company complete all as specified and directed. |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.Note : Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 19 | S&F for 2nd class hard wood 30mm thick Plain, framed, panelled shutters (06 number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 20 | Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 21 | S&Ffactory made Steel window/ ventilator glazed & gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard barsall as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 & complete all as specified and directed. Make M/S Surbhi Metal, M/S Jangid and equivalent. |
| 22 | Supply and fixing for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not excc 0.5 Sqm in each pane complete all as specified and directed. |
| 23 | Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 24 | Supply & fixed150 mm long 10mm dia Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified and directed. |
| 25 | Supply & fixed100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 26 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 27 | S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed. |
| 28 | Supply & fixedMS helical door spring 150mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed. |
| 29 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple orfixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 30 | Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample complete all as specified and directed. |
| 31 | Supply & fixing in repair of purpose made brackets trade pattern for holding 22 to 25mm dia curtain rod as per sample complete all as specified and directed. |
| 32 | Supply & fixing of stainless steel decorative fincals /knob round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repair complete all as specified and directed. |
| 33 | Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods22 to 25mm dia as per sample as in repair complete all as specified and directed. |
| 34 | Demolition ofbrickwork or stone/boulder masanory,laid dry below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 35 | Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 36 | Material & Labourfor Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 37 | Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 38 | M & L for rough cast plaster using crushed stone of size between 6 mm to 10 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 15 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and fair including two coats of cement base paint complete all as specified and directed. |
| 39 | Material andlabour10 mm thick cement plaster in cement mortar 1:3 on ceiling,finished even and smooth without using extra cement all as specified and directed. |
| 40 | Material andlabour for 15mm thick rendering in cement mortar (1:6) onbrick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 41 | Material andLabour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 42 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 43 | Material and labour for preparation of newly/old plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 44 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper paint over a coat of 1mm thick putty complete all as specified and directed. |
| 45 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller complete all as specified and directed. |
| 46 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls over a coat of 1mm thick puttycomplete all as specified and directed. |
| 47 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 48 | M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete allas specified and directed. |
| 49 | M&L for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete allas specified and directed. |
| 50 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed. |
| 51 | M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement including WPC in CM 1:4 incl taking down existing cement plaster and including necessary arrangements to work on roof projection, cornice & chajja etc. complete all as specified and directed. |
| 52 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 53 | M & L for screed plaster 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces mixed with WPC incl necessary doubingout etcfinished even and smooth for laying WPT without using extra cement complete all as specified and directed. |
| 54 | M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed |
| 55 | M & Lfor APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mixand 20 micron HMHDPE film weight not less than 3.00Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed. |
| 56 | M & L for PCC 40mm thick (minimum Consolidated thickness) Type B-0 (1:2:4), using 12.5 mm graded crushed stone aggregate as in padding finished even and smooth without using extra cement with existing slope with V shaped groves 6mm wide and 10mm deep @ 0.60 metre spacing both bays or part there of on top of padding and filled with mastic bitumen of 1:1 preparation complete all as specified and directed. |
| 57 | Demolition and breaking upof rain water pipe /UPVC pipe line 100mm/75mmdia incl all fittings, complete all as specified and directed. |
| 58 | Supply & Fixedfor 110mm diaUPVC, soil waste drain pipe, type ‘A’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid infloors or walls etc complete all as specified and directed.Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985. |
| 59 | Supply & Fixedfor 75 mm diaUPVC, soil waste drain pipe, type ‘A’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall/floors etc complete all as specified and directed.Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985. |
| 60 | Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified and directed.Note- UPVCbends shall be conforming to BS 4515 DIN 19531 and DIN 19534. |
| 61 | Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified and directed. |
| 62 | Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified and directed. |
| 63 | Supply & Fixed for 75mm bore UPVC (SWR) bendincluding jointing with solvent cement, complete all as specified and directed.Note- UPVCbends shall be conforming to BS 4515 DIN 19531 and DIN 19534. |
| 64 | S&FPVC (SWR) 75 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed. |
| 65 | S&FPVC (SWR) 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 66 | S&FPVC (SWR) 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 67 | Material andlabour in repairs 75mm diaPVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 68 | Material andlabour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 69 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed.Make: Jaquar Essco/Prayag/Plumber/Jal |
| 70 | Supply & fixed in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified and directed. |
| 71 | Supply and fixing in repair of low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified and directed. |
| 72 | Supply and fixing in repairs Vitreous China counter below W.H.B. white of size 570 x 445 mm, incl waste pipe and brackets etc complete all specified and directed. |
| 73 | Supply and fixing in repairs Chromium plated brass pillar tapof size 15 mm inWHB/Kitcen sink etc complete all specified and directed. |
| 74 | S & F in repairs Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inletincluding connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed. |
| 75 | Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closetEWC with complete one set white ( incl all necessary accesories like rag bolts/gel gasket etc.(excluding flushing cistern & flush pipe ) with ‘P’ or ‘S’ trap of dia 100mm includingprovn of cement concrete bedding complete all as specified and directed.Make : Jaquar/Cera/Hindware/Parryware |
| 76 | Supply & fixed in repair Polymer coloured (Polypropeylene Delrin and ABS) low levelflushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscriptionmark with 2731 with andincluding suitable size of MS brackets, plug, screws all as required incl taking down existinghigh level/low level flushing cistern any type disconnecting pipes and jointingwith new one etcand making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed. |
| 77 | Supply and fixing in repair plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device complete all as specified and directed. |
| 78 | Supply & fixedin repair fancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint complete all as specified and directed. |
| 79 | Supply and fixing in repair 15mm bore angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unioncomplete all as specified and directed.Make: Jaquar Essco/Prayag/Plumber/Jal |
| 80 | Supply andfixing in repair stop valves concealed type, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed. |
| 81 | Supply and fixing in repairs 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed.Make: Jaquar Essco/Prayag/Plumber/Jal |
| 82 | Supply and fixing in repairCP brass soap dish complete all as specified and directed. |
| 83 | Material and labour for Rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. . |
| 84 | S&F in repairs 20mm bore Gun-Metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 85 | S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed. |
| 86 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 87 | Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 88 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor complete all as specified and directed. |
| 89 | All as per item No 88.00 but 20mm dia bore, complete all as specified and directed. |
| 90 | Dismantling of ceiling board/lathing any thickness including frame work complete all as specified anddirected. |
| 91 | Providing & Fixingfalse ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \"T\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \"T\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights complete all as specified and directed. |
| 92 | S&F M S plate or angle, channel, square cut or notched with riveted, bolted or welded attachment including dismantling complete all as specified and directed. |
| 93 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 94 | M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 95 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 96 | S & F hold fast of flat iron conforming to Fe-290 (Gde-E-165) including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified and directed. |
| 97 | S&F in repair Jet flush including plate & PVC connection complete all as specified and directed. |
| 98 | S&F IInd Class Hard wood small fittings such as brackets of any type, latch and hinges blocks , shaped door and window stops and the like, incl all necessary labours, article n.exc 200 cu.cm each complete all as specified and directed. |
| 99 | S & F framed work as in roof trusses purlin, rafter and batterns of angle or other section with gusset plates , rails , braces, etc complete of Fe 410-W (Gde E-250), drilling for fixing of steel sheeting or other covering doors etc to be prepared for hanging including dismantling complete all as specified and directed. |
| 100 | Supply and fixing steel work in steel tabular truss/ frames/fan holder etc including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A including dismantling complete all as specified and directed. |
| 101 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Single layer Mangalore pattern or similar tiles in roofing roof coverings complete all as specified and directed. |
| 102 | S&F for 5.5mm thick sheet glass plain / pin headed, ordinary quality and glazing with oil putty in square nexc 0.50 Sqm in each pane complete all as specified and directed. |
| 103 | Supply & fixedMS helical door spring 300mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed. |
| 104 | Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 105 | S&F MS butt hinge 50mm medium weight cold rolled incl necessary welding etc complete all as specified and directed. |
| 106 | Add extra for 6mm thick external teak wood lipping 18/19mm and fixed with nails complete all as specified and directed. |
| 107 | S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 108 | S&F for 100mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 109 | M&L forpowder coated Anodised Aluminium frames for doors, windows, ventilators withone or more rebates including jointing cleats for fixing etc complete all as specified and directed. |
| 110 | M&L in repair powder coated aluminium door shutters, aluminium section minimum thickness 3mm including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etcincl taking down old aluminium door shutter complete all as specified and directed. |
| 111 | M&L in repair powder coated aluminium window shutters, any type (sliding, side hung, fix etc) ( three track) aluminiumsection minimum tickness 3mm including necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodisedaluminium snap beading screws etc incl taking down old aluminium window shutter complete all as specified and directed. |
| 112 | M& L 1 mm thick 100 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed. |
| 113 | Providing precast cement concrete type C0(1:3:6) louvres and jallies, 25 mm thick (mea sured solid), including all mouldings but excluding frame set in cement mortor 1:6including necessary form work complete all as specified and directed after dismanetling of old RCC Jali complete all as specified and directed. |
| 114 | Demolition,reinforced cement concreteroofs, floors (other than ground floors), beams, staircases, landing, parapets, chajjas, and similar suspended work cut as required to facilitate demolition complete all as specified and directed. |
| 115 | M & L for RCC 1:2:4 Type B0 using 12.5mm graded aggregate as in beams, cantilevers, bressummers, parapets, chajjas, lintels over 1.5m span etc, including formwork complete all as specified and directed. |
| 116 | Material and labour for repair to RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in columns,footings etc including necessary formwork complete all as specified and directed. |
| 117 | Material and labour for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in cooking platform,roofslabs supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and directed. |
| 118 | Material andlabour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips complete all as specified and directed. |
| 119 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 120 | Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets,light fittings, removing materials to store for keeping in safe custody orfor taking credit and making good the disturbed surfaces of walls/ceiling/floorat various siteetc, complete all as specified and directed. |
| 121 | Disconnecting electric connections and taking down old unserviceable MCB DBs of any type including MCBs DB/TPN DBs including mcbs of any capacity, complete all as specified and directed. |
| 122 | Taking down existing fan, exhaust fan re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed. |
| 123 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly complete all as specified and directed of following :- |
| 124 | One light point/bell pointcontrolled by one way5 Ampssingle poleswitch |
| 125 | One ceiling fan/exhaust fan pointcontrolled by one way5 Ampssingle pole switch |
| 126 | One 5 pin 5 Amps socket outlet on same board with other switch |
| 127 | One 5 Pin 5 Amps socket outlet on independent board with other switch |
| 128 | Allas per item No 123.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 129 | Supply and fixing of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed. |
| 130 | Supply and fixing of switch piano flush type 15/16 amps, single pole one way 240 volts complete all as specified and directed. |
| 131 | Supply and fixing of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed. |
| 132 | Supply and fixing of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as specified and directed. |
| 133 | Supply and fixing stepped type ( switch type) electronic ceiling fan regulator flush type,AC, 230 volts, complete all as specified and directed. |
| 134 | Supply and fixing of ceiling rose,surface type bakelite 65x17.5 mm,three terminals, complete all as specified and directed. |
| 135 | S&F in repair LED tube light fitting in acrylic linear tube (1x18 watt),230V for single LED tube lightincluding 1 x 18 W LEDretrofitbar professional CW 6500 K cover channel,bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. |
| 136 | Supply and fixing in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. |
| 137 | Supply and fixing in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 138 | Supply and fixing in repair testing and commissioning energy saving bldg sec light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66/65 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed. |
| 139 | Taking down existing geyser and refixing after cleaning and descaling complete all as specified and directed. |
| 140 | Supply and fixing ceiling fan 1200 mm sweep , 230 Volts,AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy including fan hook complete all as specified and directed. |
| 141 | S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep steel body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 142 | M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note : Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length. |
| 143 | S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, \"C\" Type instantaneous tripping complete all as specified and directed. |
| 144 | Supply and fixing of MCB SPN 10to 40 Amp capacity, 10KA , \"C\" Type instantaneous tripping complete all as specified and directed. |
| 145 | Supply and fixing of MCB SPN 63 Amp capacity, 10 KA , \"C\" Type instantaneous tripping complete all as specified and directed. |
| 146 | Supply and fixing of MCB TPN 63 Amp capacity,415 volt 10 KA , \"C\" Type instantaneous tripping complete all as specified and directed. |
| 147 | S&F MCB distribution board Tripple pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB\"s made outof CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB\"s and isolator\"s complete in all fixing material/accessories etc complete all as specified and directed.Note : MCB DB and MCBwill be the same make. |
| 148 | S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB\"s made outof CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB\"s and isolator\"s complete in all fixing material/accessories etc complete all as specified and directed.Note : MCB DB and MCBwill be the same make. |
| 149 | M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mmfrom top of earth plate up to 7.5 meter above ground level. |
| 150 | S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C\" type instantaneous for geyser & AC complete all as specified and directed. |
| 151 | Taking up/down worn out/damaged/unserviceable xlpe /PVC insulated underground cable rmoured, heavy duty with aluminium conductors of any size, 1100 Volt grade from trench/duct/pole/wall/ pipes/rooftops etc. complete all as specified and directed. |
| 152 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. |
| 153 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable etc and getting out in soft/loose and any type of soil complete all as specified and directed. |
| 154 | Returning,filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed. |
| 155 | Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 156 | M&L bricks for protection cover to under ground cable (with old size sub class \"B\" bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm complete all as specified and directed. |
| 157 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and directed. |
| 158 | Supply and fixing in repair tubes light grade GI tubing 40 mm dia withall fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. |
| 159 | Taking up the 20mm GI Pipe including disconnecting pipes and fittings including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and directed. |
| 160 | Supply and fixing in repair tubes light grade GI tubing 25 mm dia withall fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. |
| 161 | Total in Figures |
| 162 | Quoted Amount in Words |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
