Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-02-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-02-2026 |
| 2 | 28-01-2026 | Corrigendum No 1 | BOQ | 10-02-2026 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced ) in any position and paving n.exc 15 cm thickness below or above ground level)complete all as specified and as directed |
| 2 | Demolition ofBrickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 3 | M&L brick work with fly ash \"bricks(FASB) confirming to IS 12894, of strength M-10 straightor curved on plan exc 6m mean radiusbuilt cement mortar 1:4 complete all as specified and as directed. |
| 4 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.complete all as specified and as directed. |
| 5 | M&L for rendering 15mm thick on faces of brick work or concrete surfacesCM 1:6, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 6 | M&L rendering 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cementcomplete all as specified and as directed. |
| 7 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 8 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 9 | Taking down 25 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 10 | Supplying and laying of 20mm CPVC pipes SDR 11 &CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 11 | Supplying and laying of 25mm CPVC pipes SDR 11 &CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 12 | Taking down old existing unserviceable HDPE water storage tank(PVC/RCCand of capacity n exc 500 ltrs etc complete as directed |
| 13 | S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 25mm dia CPVC pipe medium grade washout pipe 450mm long with plug and 25mm dia CPVC pipe medium grade overflow pipe 600 mm long with fittingcomplete all as specified and as directed by the Engineer-In- Charge. |
| 14 | S & F in repair 25mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 15 | S&Fin repair25 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed. |
| 16 | S&F in repairs vitreous china squatting pan \"ORISSA PATTERN\" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 17 | S&F in repair vitreous china wash handbasin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed. |
| 18 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 19 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 20 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed. |
| 21 | S&F brass CP mixer (Wall/Sink/Pillar) fency type 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed. |
| 22 | S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed. |
| 23 | S&F in repair 15 mm bore angle cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 24 | S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 25 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed. |
| 26 | S&F in repair 15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete. |
| 27 | S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 28 | S&F 600mm CP towel rail \"D\" type fixed to wall with CP brass screws complete all as specified and as directed. Make: Cera Cat Part No F5013103CH or equivalent make as specified in Appendix B to PS. |
| 29 | S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge. Cera cat part No F5013106CH or equivalent make as specified in Appendix B to PS. |
| 30 | Supply and fixing 250-300mm size corner glass shelf with bracket fixed with screws and thickness of glass 8-10mm complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Taking down and breaking up PVC/CI drain pipes set in cement mortar in floors or wall in 110/75mm dia meter complete all as specified and directed |
| 32 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed |
| 33 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 34 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 35 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 36 | S&F in repair PVC floor 125/110mm trap/Nahani trap PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 37 | S&F SS chromium plated peg set of Six fixing with wall complete all as specified and directed |
| 38 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 39 | S&F wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.63mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and directed. |
| 40 | M&L for applying Two or more coats on new surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed. |
| 41 | M&L complete removal of existing treament by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and preparing surfaces of wall complete all as specified and as directed. |
| 42 | M&L for applying Two or more coats on old surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed. |
| 43 | M&L for complete removal of existing treament on ceiling and applying one coat of white wash all as specified and as directed. |
| 44 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 45 | M&L forcomplete removal of existing treatmentand applying two coat of OBDover2mm thickputty in two layer on old surface of wall complete all as specified and as directed. |
| 46 | M & L for preparing of new surface andapplying two coat of oil emulsion distemper over a coat of alkali resistant priming paint over 2mm thick putty in two layer on internal surface complete all as specified and as directed. |
| 47 | M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of primer 10 cm width or girth complete all as specified and as directed. |
| 48 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed. |
| 49 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6etc complete all as specified and as directed. |
| 50 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , in vertical surfaces such as skirtings/dados or risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 51 | M&L for glazedcoloured ceramic tiles 300 x 600 x 8 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 52 | M&L non skid ceramic coloured tiles7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm over 15mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 53 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed. |
| 54 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:4,etc complete all as specified and as directed. |
| 55 | M&L for machine cut kota stone slab 18-20mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 56 | Demolition of cement concrete (reinforcement cutas facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified at site complete all as specified and as directed. |
| 57 | M&L reinforced cement Concrete 1:2:4 Type B1 using 20mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste of formwork etc complete all as specified and as directed. |
| 58 | M&L for granite of any type in full length for kitchen plateform, in steps, jambs, pillars, window cills,gate pillar & like 20 mm thick machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as specified and as directed. |
| 59 | Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete all as specified and as directed. |
| 60 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete. Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4 complete all as specified and as directed. |
| 61 | -do- all as per item No 60 above but exc 1.5 Sqm and n exc 4 sqm each. |
| 62 | Taking down shutters of any description nexc 1 sq.meach removal to store complete all as specified and as directed. |
| 63 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri /Black Cobra |
| 64 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri /Black Cobra |
| 65 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Following hardwareincluded in quoted rate:-Make : Rajshri /Black Cobra |
| 66 | S&F size 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter of comprising of virgin PVC polymer of K value 58-60 (suspension Grade)calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and nontoxic additives(maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650kg/cum, screw withdrawal strength of 1800 N (face) & 900N (Edge) minimum comprehensive strength of 50N/mmsqr, modules of elasticity 850N/mm sqr and resistance to spread of flame of class A category with property of being terminate/ borer proof, water /moisture proof and fire retardant. Stainless steel but hinges of required size with necessary with full body threaded star headed counter sunk SS Screws complete all as specified and directed. Make : Rajshri /Black Cobra |
| 67 | S&F 125 mm stainless steel butt hinges with screw complete all as specified and as directed. |
| 68 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and as directed by the Engr-in-Charge. |
| 69 | S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed. |
| 70 | S&F 300 mm long 16mm dia aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 71 | S&F in repair mild steel, 300 mm ordinary rat rail rod pattern door spring including roller and roller plate etc complete all as specified and as directed. |
| 72 | S&F Floor door stopper 140mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor etc complete all as specified and as directed. |
| 73 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work includingbeading on cutting /exposed edges, polishing for cupboard shutter including following hardware:-Make : Rajshri /Black Cobra |
| 74 | S&F in repair Kitchen basket stainless steel for Cup and saucer basketsize430 x508x100 mmmade oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long, roller of size 45 mm x25mm x20 mmand magnetic and connected plates to shutters complete all as specified and as directed. |
| 75 | S&F in repairKitchen basket stainless steel for Partitionbasketsize430 x508x100 mmmade oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long, roller of size 45 mm x25mm x20 mmand magnetic and connected plates to shutters complete all as specified and as directed. |
| 76 | S&F in repair Kitchen basket stainless steel for Plainbasketsize430 x508x100 mmmade oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long, roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed. |
| 77 | S&F in repair Kitchen basket stainless steel for Dish(plate) basketsize430 x508x250 mmmade oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long, roller of size 45 mm x25mm x20 mmand magnetic and connected plates to shutters complete all as specified and as directed. |
| 78 | S&F in repair Kitchen basket stainless steel for Knife and spoonsmade oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long, roller of size 45 mm x25mm x20 mmand magnetic and connected plates to shutters complete all as specified and as directed. |
| 79 | S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as specified and as directed.Make- KAFF |
| 80 | S&F stainless steelhandles 100mm size for kitchen cabinet shutters complete all as specified and as directed. |
| 81 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed. |
| 82 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed. |
| 83 | M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 84 | M&L forpowder coated aluminium sliding window shutters (shutters to be slide in suitable track system) (three panel shutter ) fabricated out of section for outer frame having weight not less then 1.17kg/Rm, sliding window shutters (02 Nos glazed & 01 gauzed) formade of sectionsall roundhavingweight not less than 0.42 kg/Rm top rail , bottom rail and verticle styles and midlle rail of shutter having weight not less then 0.368 kg/Rm, including 4.8mm thick plain selected quality glass stainless steel wire cloth 0.36 mm dia steel wire and apperture 1.40 mm including providingpowder coated aluminium handle , cleats and glazing clip special and suitable auto lock system , rubber gasket etc complete all as specified and as directed. Note : (i) The minimum thickness of powder coating shall be 50 Micron. (ii) Cost of all fittings & Fixture shall deemed to be included in unit rate quoted rate by the tenderer. |
| 85 | M&L for powder coated aluminium glazed ventilator fixed/openable type, without sash bars usingapproved powder coated aluminium sections weighing 0.55 kg/m with provision for fixing of exhaust fan etc complete all as specified and as directed. |
| 86 | M&L for powder coated aluminium glazed window shutters (One No glazed & One gauzed) side hung type, including fabricated out frame work of required size and frame having weight not less then 0.667kg/Rm without sash bars made of shutter sections weighing 0.55 kg/m including providingnecessary powder coated aluminium fittings like joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type C-21 100mm long (2 no.) aluminiumhandle (1 no.) per shutter etc including 4.0mm thick plain selected quality glass, stainless steel wire cloth 0.36 mm dia steel wire and apperture 1.40 mm and shutter providedetc complete and as directed. |
| 87 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 88 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 89 | M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed. |
| 90 | S&F Sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 91 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 92 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 93 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed. |
| 94 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and as directed. |
| 95 | M&L Cement concrete in foundations/sub base, filling and mass concrete 1:4:8 type D2 (using 40mm graded stone agg) complete all as specified and directed. |
| 96 | Providing and laying 60mm thick colour rubber moulded factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed. |
| 97 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime coba 80 to 100mm thick mud phuska/cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 98 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 99 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 100 | M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 101 | M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stillgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately assupply only |
| 102 | Supply only integral water proofing compound complete all as specified and as directed. |
| 103 | M&L applying water proofing treatment with the following-(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 150gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. |
| 104 | M&L Cement concrete tiles 25cm x 25cm x 20-22mm thick, machine pressed; set jointed and pointed in neat with grey cement and no pigment slurry in floors, and cut and polishedand shall be laid over 15 mm thick cement mortar screed in 1:3 and joints between the tiles to be filled with chemical like Tile grout or equilent complete all as specified and directed. |
| 105 | M&L for rendering 15mm thick in cement mortar 1:3 mixed including water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 106 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed. |
| 107 | M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 108 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed. |
| 109 | S&F Stainless steel curtain rod 25mm dia grading with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 110 | S&F in repair of door seal 20 to 25 mm wide 0.9 to 1.0 m length with GI Powder coated flap fixed to doors shutter with screws, complete all as specified and directed. |
| 111 | S&F MS framed work ascooler stand/ in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) complete all as specified and as directed. |
| 112 | M& L for precast RCC Cover Slab, 1:2:4 type B 1 using 20 mm graded stone aggregate as in manhole cover slabs including necessary form work etc. set in CM 1:6 complete all as specified and as directed. Note :- reinforcement shall be measured and paid separately. |
| 113 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips completeall as specified and directed. |
| 114 | Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 200 mm Internal dia of pipe complete all as specified and directed |
| 115 | M&L for concrete bed to drain pipes 200mm including packing under, and haunching againstthe sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed |
| 116 | M&L Reinforced concrete pipes, 200mm dia class NP2, laid and jointed complete with collars complete including testing all as specified. |
| 117 | Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting outsoft/loose soil complete all as specified and directed. |
| 118 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed |
| 119 | Removing excavated at a level n.exc 50m m above the starting point complete all as specified and directed |
| 120 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete/ existing plaster/ mud phuska/ cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 121 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed. |
| 122 | M&L 10 mm thick plaster in CM 1:3 including liquid WPC over including and chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal construction, completely all as specified and directed. |
| 123 | M&L applying water proofing treatment with the following :- (a) Onecoat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) A layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) land on primed surface by forced application complete all as specified.(c) All joints and change in direction should be curved with CM(1:3) mixed with SBR latex @ 200ml per bag on cement and curved well before laying of APP membran(d) M&L preparation of newly surface of APP membrane and applying two coat of botuminous aluminium paint @200gm Sqm etc. |
| 124 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 125 | S&F 1000 ltr single foam 5 layer white colour ISO approved rotational moulded polyethylene cylindrical vertical with closed top water storage tank with tank adaptor at Inlet & outlet including 20mm ball valve hoisted and fixed in position on new or existing foundation complete all as specified and directed. |
| 126 | S&F one piece (with flushing cistern) vitreous china EWC size 650x 355x 745 \" snow whitewith \"P\" or \"S\" trap, softclosing seat cover etc complete all as specified and as directed. Cera cat No S1013229 or equivalent complete all as specified and as directed. |
| 127 | S&F in repairwhite color Vitreous China Ware table top Wash hand basin fixing on granitre complete all as specified and as directed.Make : Cera cat No S2020152 and basin Mixer Cera cat No F1099452 OR equivalent. |
| 128 | S&F bathroom cabinet mirror 350 x 522 size complete all as specified and as directed. Note : Jainiko Cat no MCJ-11 or equalant |
| 129 | S&F PVC connection 15mm dia of length 450mm etc complete all as specified and as directed. |
| 130 | S&F brass CP Wall mixer with provn of shower rose fency type 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed. |
| 131 | S&F CP wash basin mixer, Piller type type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.Cera cat No F1099452 OR equivalent. |
| 132 | S&F in repair 100 x100mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union. Make : Cera cat No F7020307AB OR equivalent |
| 133 | S&F chromium plated shower arm 380mmwith flange complete all as specified and as directed. Make : Cera cat No F7040205 OR equivalent |
| 134 | S&F in repair of CP bib cock, fancy type15 mm dia long body with wall flange made of cast copper alloy, chromium plated, fancy type complete all as specified and directed. |
| 135 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 136 | M&L complete removal of existing treament by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and preparing surfaces of wall complete all as specified and as directed. |
| 137 | M&L for preparation of old ceiling surface and applying one coat of OBD all as specified and as directed. |
| 138 | S&F for PVC waste pipe 32mm dia, 90 cm long for WHBwith cup, fixed in repairs complete all as specified and directed. |
| 139 | M&L complete removal of existing treamentand by scrapping with mechanical sander (having mechanical vaccum mechanism) applying two coat of OBD over a coat of alkali resistant primer over two coat in two layer of cement base water proof putty on wall surface complet all as specified and as directed. |
| 140 | M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed. |
| 141 | M&L for preparation old wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat synthetic enamel paintetc complete all as specified and as directed. |
| 142 | M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over one coat of primer 10 cm width or girth complete all as specified and as directed. |
| 143 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 144 | M&L non skid ceramic coloured tiles 600x600, 7 to 8 mm thick (square or rectangular)including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 145 | M&L for coloured joint free ceramic tiles 600x1200, 7 to 8 mm thick (square / rectengular) including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 146 | M&L for glazedcoloured ceramic tiles 600x1200, 7 to 8 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 147 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting andpolishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed. |
| 148 | Taking down and Refixing in the same opening of door/window/cupboard wooden shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge |
| 149 | Supply and fixing corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 150 | Supply and fixing 600mm Streight glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 151 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 152 | S&F 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed.Make : Rajshri /Black Cobra |
| 153 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed. |
| 154 | S&F 100 mm SS cupboard handle complete all as directed. |
| 155 | S&F 40 mm thick plain framed, panelled Shutters of ( any number of panels ), moulded on solind Ist class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 156 | S&F 35 mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed. |
| 157 | S&F 100 mm SS butt hingesmedium weight for WPC door etc complete all as specified and as directed. |
| 158 | S&F 100mm size butt hinges medium weight cold rolled, mild steel etc complete all as specified and as directed. |
| 159 | S&F 12mm dia aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and as directed. |
| 160 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed. |
| 161 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 162 | M&L for 50 micron powder coated aluminium glazed ventilator fixed/openable type, without sash bars usingapproved powder coated aluminium sections weighing 0.55 kg/m with provision for fixing of exhaust fan complete all as specified and as directed. |
| 163 | M&L for colorued 60mm thick factory made chamfered edge rubber moulded cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU Mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 164 | M&L for rendering 15mm thick in cement mortar 1:3 mixed incliding water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 165 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed. |
| 166 | S&F Stainless steel curtain rod 25mm dia grading with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 167 | S&F of door seal 45 to 50 mm wide 0.4 to 0.6 mm thick fixed to doors shutter with screws, complete all as specified and directed. |
| 168 | S&F Roof trusses (framed), trussed, purlins, crane gantries, railS&Fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 and all as directed by engineer in charge. |
| 169 | S&F Pre-painted galvatume aluminum zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 170 | S&F Powder Coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges/roller , anodised alumnium snap beading, screws etc. complete all as specified |
| 171 | S&F 12 mm thick prelaminated celuka ply exterior grade both side laminated and fixed to aluminium frame all as specified. |
| 172 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 173 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 174 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 175 | M & L for concealed point wiring One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 176 | Ditto all as per item No 175 above but one exhaust fan controlled by one switch and regulator. |
| 177 | Ditto all as per item No 175 above but 5 Amp socket outlet point controlled by one switch on independent board. |
| 178 | Ditto all as per item No 175 above but 5 Amp socket outlet point controlled by one switch on same board. |
| 179 | Description all as per item No 175 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 180 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 181 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 182 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 183 | S&F ceiling rose,surface polycarbonate63 x50mm three terminals completeall as specified and asdirected. |
| 184 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 185 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 186 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 187 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 188 | Supply and fixing in repair 22 W LED 6000kDecorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 189 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 190 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with gaivanised steel or strip and overall PVC sheathed, 25 Sqmm 4 core ISI marked as per IS 7098(Part 1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etccomplete all as specified and directed by Engineer-in-Charge. |
| 191 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 192 | S&F BLDC ceiling fan complete with three blade, down rod , snackel clamp, reel insulator, fan canopy, split pin and accessories 230V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28-30 watt and minimum air delivry of 210-230 CMM, BEE 5 star rated , two core PVC insulared copper wire white sheathed of size 0.5Sqmm from fan connector to ceiling rosecompleted all as specified and directed. Note:- (i) Writing MES No in 20mm letter size with black paint etc is deemed to be included in quoted rate (ii) Old fan deposited in store yard |
| 193 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 194 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge |
| 195 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 196 | Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 63 Amp Ics=100% =Icu complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
