|
| 1 | Excavation in trenches n.exc. 1.50 Mtr in depth and n.exc. 1.50 Mtr in width getting out in hard/dense soil complete all as specified and directed. |
| 2 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 3 | M & L for Cement concrete in foundations,filling and mass concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) complete all as specified and directed. |
| 4 | Returning, filling in including spreading, leveling, watering and well ramming in layers in not exc 25 cm complete all as specified and directed. |
| 5 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floors and paving n exc 15CM thickness but above ground level complete all as specified and directed. |
| 7 | M & L for 75 mm thick plain cementconcrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub-base of floors, the surface of concrete fair and even complete all as specified and directed. |
| 8 | M & L for 25 mm thick plain cement concrete (1:2:4) type B-1 (using 12.50 mm graded stone aggregate) as in floors, finished the surface of concrete fair and even complete all as specified and directed. |
| 9 | M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed. |
| 10 | M & Lfor Prepolished cement concrete chequered tiles of size 300mm by 300mm by 25mm thick parallelogram tiles or in any shape of any tint, heavy duty, set jointed and pointed with grey cement slurry @2.5 kg/per Sqm complete all as specified and directed. |
| 11 | M & L Glazed ceramic tiles in vertical surface 350x 250x 7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 12 | M & L Granite (of any type) tiles 20mm thick machine cut, bedding and jointed with grey cement slurry and pointed with white cement with admiture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 13 | M & L framed work as in roof trusses (framed), trussed purlins, cran gantries rails and fasternings and heavy brackets framings (beam, tee angle, channel jor flat sections) including distance pieces cleats complete all as specfied and directed. |
| 14 | S & F for TMT bars mild steel bars 10mm dia and over cut to length bent to shape required including ranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 16 | M & L formwork to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 17 | M& L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) in foundation, including rafts footings, foundation beams, plinth beams: bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 18 | M & L formwork to sides of pollars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 19 | M& L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) in columns pillars, piers, posts and struts complete all as specified and directed. |
| 20 | S & F pre-painted galvatume aluminium Zince coaing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa asin roof covering/cladding to wall, fixed with self tapping screws as specfied complete all as specified and directed. |
| 21 | S & F pre-painted galvatume aluminium Zince coaing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa asin roof covering/cladding to wall, fixed with self tapping screws as specfied complete all as specified and directed. |
| 22 | M & L rendering 10mm thick (cement mortar 1:4) on fair faces of brick or concrete surfaces surfaces rough for receiving subsiquent layer complete all as specified and directed. |
| 23 | M & L rendering 15mm thick (cement mortar 1:6)on fair/unfair faces of brick or concrete surfaces and finished even & smooth without using extra cement complete all as specified and directed. |
| 24 | M & L for preparation of new surface of wall and applying two coats of cement base paint of wall over a coat Priming plastered and other surfaces with alkali resistant priming pain complete all as specified and directed. |
| 25 | M & L for two coats of synthetic enamel paintover a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth incl all complete all as specified and directed. |
