|
| 1 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :Of sectional area 40 square centimetres and above. ceiling frame work |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar |
| 5 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 6 | Dismantling of old kitchen cabinets including stacking material within 50 metres lead. |
| 7 | Dismantling of Aluminium Door with Frame including stacking material within 50 metres lead. |
| 8 | Dismantling of Aluminium window with Frame and ventilator including stacking material within 50 metres lead. |
| 9 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 10 | Dismantling of existing kitchen sink with drain boardincluding stacking material within 50 metres lead. |
| 11 | Dismantling of existing kitchen chimney etc all complete including stacking material within 50 metres lead. |
| 12 | Removal of existing wiring, gangbox/metal box with framesetc all complete including stacking material within 50 metres lead. |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 16 | 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). |
| 17 | 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Providing and fixing up to floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1½:3 (1 Cement : 1½ coarse sand(Zone III) : 3 graded stone aggregate 20 mm nominal size). 40x20x15cm |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 23 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 24 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 25 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars |
| 27 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes.GI pipes |
| 28 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints. Payment for grouting of joints to be made separately). Size of Tile 1000 x 1000 mm (10mm thickness) |
| 31 | Providing and fixing of polished Glazed Vitrified tiles (GVT) (Top Layer of liquid glass) (Backsplash) in walls with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints. Size of Tile 600 x 600 mm (9mm thickness) |
| 32 | Providing and fixing 20mm thick,polished black galaxy granite for kitchen platform including making facing edge bull nose moulding/edge and sealing joints with epoxy resin based adhesive as directed.Granite to belaid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints, needs to be embedded 20mm into the wall wherever necessary andas directed by the engineer in charge Black Galaxy Granite (20mm thick)(mirror polished and machine cut edge) |
| 33 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 34 | Supplying & fixing pre-fabricated/factory made modular kitchen units below main kitchen platform and unit having approx. 750 mm height and 600 mm depth as per following specifications and enclosed sketches. The frame work or carcass, shutterof the cabinets including drawer fascia/sides /bottom, shelves etc. shall be made out ofBoiling Water Proof (BWP)19mm thick IS:710 (make Archidply Classic Plus/CenturyPly) with 20 year\"s warranty. Shutter and frames should be laminated with High gloss Antiscratch acrylic (make Advance laminates/Greenlam/Merino/Royale Touche)of 1.5 mm thicknesson both sides of BWP. The framework shall be made from BWP from 19mm thick BWP. Each shutter shall be fixed to the framework using two numbers of Stainless Steelsoft close auto hinges of grade 304 and and one no. of profile brush finish Stainless Steel Handle 100/150mm of grade 304for all cabinet door/shutters. the drawer should be mounted on approved quality, high precisionsoft closed telescopic channels45 kg capacity to be designed as per drawer size and to meet the weight requirement with minimum length of 20 inchto ensure smooth movements of drawer with/without content weights. Inthekitchen,thereshouldbeaminimumof4nos.ofplain baskets(size - 68cmx40cmx45cm), 3nos. of cutlery basket (size- 68cmx20cmx45cm), 3nos.ofbasketforcup&saucer(size-68cmx20cmx45cm),2nos.of basket for thali (size-68cmx40cmx45cm) ,1 no. of basket for Oil/bottle pullout (2shelves) (size -68cmx15cmx45cm), 1 no. of detergent holder (2 shelves)(size -68cmx15cmx45cm), 1 no. of Dustbin Holder (size -68cmx40cmx45cm). bottom cabinet 19mm BWP |
| 35 | Supplying & fixing pre-fabricated/factory made overhead kitchen wall units abovemain kitchen platform having box type overhead units approx.height800 mm and 400 mm depth as per the following specifications and enclosed sketches.The frame work or carcass, shutterof the cabinets including drawer fascia/sides /bottom, shelves etc. shall be made out ofBoiling Water Proof (BWP)19mm thick and 12mm BWP thick IS:710 on the back side (make Archidply Classic Plus/CenturyPly) with 20 year\"s warranty. the shutter and frames should be laminated with High gloss Antiscratch acrylic(make Advance laminates/Greenlam/Merino/Royale Touche)of 1.5 mm thicknesson both sides of the BWP. Each shutter shall be fixed to the framework using two numbers of Stainless Steelclose auto hinges of grade 304 and and one number of Stainless Steel Handle 100/150mm of grade 304for all cabinet door/shutters.All the shelves shall be supported on approved quality Stainless Steel pins and shall be adjustable for various height. The unit shall be firmly fixed to the wall/slab/floor using non corrosive metal screws of appropriate size and rawl plugs. The acrylic laminate should be pasted with synthetic resin based adhesive (Fevicol Probond/Mahacol Heatfit/epoxy resin or approved equivalent). Installation, testing, commissioning of allmodular units. The Stainless Steel auto hinges mentioned should be of size 110mm, 0 degree/180 degree/180+135 degree, Hydraulic Bivertical Two Door Pneumatic mechanism hinges (heavy duty) as directed by the engineer in charge. |
| 36 | 19mm BWP |
| 37 | 12mm BWP |
| 38 | Supplying and fixing of 4mm thick Float glass panes in the doors/shutter frames of the cabinet overhead to the kitchen slab with necessary accessories etc all complete as directed by the engineer in charge |
| 39 | Supplying and installation of 60cm BLDC filterless autocleankitchen chimney(suction - 1500 m3/hr) (make Elica/Faber) with touch and motion sensor control and noise level 58 Decibels with 10 year\"s warranty. The item also includes installation tool, kits and other accessories etc. all complete as directed by the engineer in charge. |
| 40 | Supplying and installation of 3 brass burner hobtop with auto igniton gas stove with toughened black glass finish (make Elica/Faber) and dimensions 860x450x56mm and Cast iron pan support. the knobs should be metallic of smooth finish. |
| 41 | Providing and fixing Double bowl Stainless Steel kitchen sink grade 304 (overall size -37x18x9 inchesandthickness-1.2mm)approx.(oraspersite requirement/directed)ofMake-lorazzoorequivalent(Square designer lustrous matt finish) with expandable colander/stainer basket in the kitchen platform as under counter type in the granite slab and marble slab neatly according to the size of sink, complete as directed. The item includes waste coupling, stainer, drain dropconnectiontothefloortrap,wastepipeincludingcostofall material, labour charges, curing etc. complete as directed by the engineer in charge |
| 42 | Providingandfixingofstainless steel sink mixer with regular swinging spout (wall Mounted) with connecting legs and wall flanges (Hindware,Parryware,Jaguarmake)orotherapprovedequivalent make including cost of all material, labour charges etc. |
| 43 | Providing and fixing of precoated (metal/GI) wall angles 25x25mm thickness 3mm, Runner 100mm thickness 1mm, Section 75mm thickness 1mm, perimeter(u shape channel), U trimof approved make conforming to IS : 733 in frames of false ceiling including angle cleats with necessary C.P. brass/stainless steel sunk screws, perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (expansion hold fasteners to be included). |
| 44 | Providing and fixing ofPVC ceiling panel/louvers (Soffit panels) make Vox SVP-08 (wood finish) 2mm thickness, termite & fire resistantwith suitable screws, SVP J trim, SVP T trim/connector for the panel/louvers in ceiling etc. complete (frame work to be paid separately) as directed by the engineer-in-charge. |
| 45 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. |
| 46 | Providing & Fixing of premium quality high gloss Wood Plastic Composite (WPC) Door, wood finish Solid frames 100x75mm thickness, water proof and termite proof and density 850, single rebate and making it good to the walls. (Bottom frame included), iron hold fast to be included 40x5mm as per direction of Engineer -in-charge. |
| 47 | Providing and fixing of premium quality high gloss Wood Plastic Composite (WPC) Door Shutter 30mm thick, wood finish (Solid) waterproof & termite proof, 600 density, glossy wood finish all complete as per direction of Engineer-in-charge. |
| 48 | Providing and fixing of premium quality high gloss wood finish uPVCframe (Solid) size 75mm x 65mm, corners of the frames to be fixed with the wall with solvent and stainless steel screws as per manufacturer’s specification andProviding and fixingpremium quality glossy wood finish uPVC window panelsize of 65mm x 60mm (solid)with 4mm glass pane corners of the frames to be fixed with the wall with solvent and stainless steel screws, joints mitred and Plastic welded with necessaryhinges and handles fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
| 49 | Providing and fixing of Stainless Steel hinges 2.5mm thickness corrosion resistant with necessary screws etc. complete. 125mm |
| 50 | Providing and fixing Stainless Steel sliding door bolts corrosion resistant with nuts and screws etc. complete :250mm |
| 51 | Providing and fixing Stainless Steel tower bolt corrosion resistant with necessary screws etc. complete : 150mm |
| 52 | Providing and fixing Stainless Steel handles corrosion resistantwith necessary screws etc. complete : 150mm |
| 53 | Providing and fixing superior quality single piece WC white vitreous pedestral type floor mounted European water closet (Make: Jaguar) with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories set, size 370x670x720mm S Trap-220mmcutting and making good to the floor and wall wherever required as directed by the engineer in charge Lyric S Trap EWC-LYS-WHT-38851S220UFSMN |
| 54 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with Teak Wood frame polishedwith 6 mm thick hard board backing of teak wood wherever require as directed by the engineer in charge: Rectangular shape 800mm x 450mm |
| 55 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 56 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm |
| 57 | Providing and fixing wall mounted Stainless steel towel rail grade SS304 complete with brackets fixed to wooden cleats with S.S screws with concealed fittings arrangement of approved quality and colour as per direction of Engineer-in-charge. 600 mm long towel rail & 300mm wide |
| 58 | Providing & fixing of wall mount exhaust fan (Model Studio)size of blade length 150mm, product size: 240x240x165mm, BLDC motor, 6.8W, low noise, 2000RPM, Brush Finish/Gloss finish/wooden finish along with necessary socket and wiring as directed by the engineer in charge |
| 59 | Supplying & fixing of recessed mounted square/round LED luminaries 18watts 6000K LED in white finish (make-havells LHEBMDP7UZ1W018 or equivalent approved brand as per ISI specification) and as directed by the engineer-in-charge |
| 60 | Supplying & fixing of 5-star energy efficient ceiling fan (BLDC) 1200mm sweep with all accessories (including regulator & remote) as required. RPM 360 ADR 235. Make Usha/Bajaj/Orient/Havells/Crompton or equivalent as directed by the engineer-in-charge |
| 61 | Concealed Wiring for light point/exhaust fan point/call bell point/A.C, Wiring for light power/plug , Wiring for circuit/sub main wiring alongwith earth wire with the followingsizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required and directed by the engineer-in-charge |
| 62 | 1.5 sq.mm including earth wire |
| 63 | 2.5 sq.mm including earth wire |
| 64 | Supplying and fixing PVC conduit pipe 25mm dia 2mm thick with suitable size of bends, junction boxes adhesive paste etc. including connections etc as required for wiring as directed by the engineer-in-charge. |
| 65 | Supplying & fixing 2-way PVC conduit junction box of size 20mmx25mmx32mm on surface of ceiling as required as directed by the engineer-in-charge. |
| 66 | Supplying & fixing 3-way PVC conduit junction box of size 20mmx25mmx32mm on surface of ceiling as required as directed by the engineer-in-charge. |
| 67 | Supplying & fixing 4-way PVC conduit junction box of size 20mmx25mmx32mm on surface of ceiling as required as directed by the engineer-in-charge. |
| 68 | Supplying & fixing 3 pin 5 amps ceiling rose on the existing junction box/wooden block including connections as required and directed by engineer in-charge |
| 69 | Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc directly on ceiling/wall, i/c connection 1.5/2.5 sq.mm FR PVC insulated, Copper conducted, single core cable and earthing etc as requiredand direc ted by engineer-in-charge. |
| 70 | Supplying & fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 & IS 1293 and directed by the enginner-in-charge. |
| 71 | 10A one way switch |
| 72 | 16A one way switch |
| 73 | Supplying & fixing of modular socket & connected accessorieson existing modular switch plate as per IS 3854 & IS 1293 and directed by the enginner-in-charge. |
| 74 | 6A three way 5 pin socket |
| 75 | 16A three wat 5 pin socket |
| 76 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 415volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnection powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 8-way, (4+24) Double Door |
| 77 | Supplying and fixing following rating,40 amps TPN, 415 volt isolator in the existing MCB DB complete with connection testing andcommissioning etc as required & directed by engineer in charge |
| 78 | Supplying and fixing following rating,20 amps TPN, 415 volt isolator in the existing MCB DB complete with connection testing andcommissioning etc as required & directed by engineer in charge |
| 79 | Supplying and fixing following rating,10 amps TPN, 415 volt isolator in the existing MCB DB complete with connection testing andcommissioning etc as required & directed by engineer in charge |
| 80 | Supplying & fixing 18-way concealed metal box made of 18 SWG sheet metal with modular pvc cover frame of nominal Size on surface or in recess & directed by engineer-in-charge |
| 81 | Supplying & fixing 12-way concealed metal box made of 18 SWG sheet metal with modular pvc cover frame of nominal Size on surface or in recess & directed by engineer-in-charge |
| 82 | Supplying & fixing 6-way concealed metal box made of 18 SWG sheet metal with modular pvc cover frame of nominal Size on surface or in recess making good to the walls & directed by engineer-in-charge |
| 83 | Supplying & fixing 4-way concealed metal box made of 18 SWG sheet metal with modular pvc cover frame of nominal Size on surface or in recess making good to the walls & directed by engineer-in-charge |
| 84 | Supplying & fixing 3-way concealed metal box made of 18 SWG sheet metal with modular pvc cover frame of nominal Size on surface or in recess making good to the walls & directed by engineer-in-charge |
| 85 | Supplying, fixing, testing & commissioning of Polycarbonate LED Profile Lights (warm white/blue/orange) with 12V & 5A Driver (120 LED per metre), 33W placing below the overhead cabinet and inside the cabinets with necessary screws etc. all complete and directed by the Engineer in charge. |
| 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter |
| 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 88 | Single tee without door110x110x110 mm |
| 89 | Bend 87.5°110 mm bend |
| 90 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 92 | 20 mm nominal outer dia. Pipes. |
| 93 | 25 mm nominal outer dia .Pipes. |
| 94 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) union socket, having thermal stability for hot & cold water supply, including fixing the socket to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : |
| 95 | 20mm nominal outer dia. |
| 96 | 25mm nominal outer dia. |
| 97 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Tee, having thermal stability for hot & cold water supply, including fixing the tee to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : |
| 98 | 20mm nominal outer dia. |
| 99 | 25mm nominal outer dia. |
| 100 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) elbow, having thermal stability for hot & cold water supply, including fixing the elbow to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : |
| 101 | 20mm nominal outer dia. |
| 102 | 25mm nominal outer dia. |
| 103 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) reducer socket, having thermal stability for hot & cold water supply, including fixing the elbow to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : 25x20mm |
| 104 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Brass socket, having thermal stability for hot & cold water supply, including fixing the elbow to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : 15x20mm |
| 105 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Brass elbow, having thermal stability for hot & cold water supply, including fixing the elbow to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : 15x20mm |
| 106 | Providing and fixing Stainless steel angle cock having thermal stability for hot & cold water supply. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : 15mm |
| 107 | Providing and fixing Stainless steel Bib cock having thermal stability for hot & cold water supply. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : 15mm |
| 108 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Female Thread Adaptor 25mmx25mm, having thermal stability for hot & cold water supply, including fixing the adaptor to the pipe. This includes jointing& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : |
| 109 | Providing and fixing G.I Tee25mmx25mm, having thermal stability for hot & cold water supply, including fixing the tee to the pipe. This includes jointing, cutting of threads& fittingsand testing of joints complete as per direction of Engineer in Charge. : |
| 110 | Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 111 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
