|
| 1 | Excavation in foundation in ordinary soil (loam, clay or sand) including, lift up to 1.50 m and lead up to 30m and including filling watering and ramming of oxcavated the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30m form the foundation trenches. (Rate including Royalty of earth also) (4-Chapter S.I.NO4.01) |
| 2 | Providing and laying cement concrete in l :5:10 ( Cement : 5 Coarse sand : 10 graded stone aggregate40 mm nominal size) and curing complete, lncludingcost of form work. in Foundation and floors. |
| 3 | Class-150 brick work in 1:4 cement and Coarse sand (1.25 fineness modulus mortor in Foundation including supply of all material, labour and tolls and plants etc. All complete. (cp-6,S.I. No. 2) |
| 4 | Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) and curing complete, lncluding cost of form work. ln Foundation and floors..(5-Chapter Sr.No.5 Si.No.6) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 2023 SH-6.4.1 ) |
| 6 | R.C.C. work Providing and laying in position specified grade of renforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement. All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (S.I. No. 5.1.3) |
| 7 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts. |
| 9 | 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand) |
| 10 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Fire retardant plywood conforming to IS: 710 |
| 12 | Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse sideof adhesive bonding quantity conforming to lS : 2046 Type S, including cost of adhesive of approved quality. (1.50mm thick) |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade I New work (two or more coats) over and including water thinnable priming coat withcement primer including cost of all materials, labour T&P etc requlred for proper completion of work. |
| 14 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 llth} sqm over and including priming coat of exterior primer applied @ 2 20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work |
| 15 | Providing and fixing wash basin with C.l brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: White Vltreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps |
| 16 | Providing and fixing lsl marked flush doorto lS : 2202 (Part l) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including lsl marked Stainless Steel butt hinges with necessary screws.(Excluding cost of Fittings) shutters conforming1 9.2\"l (A) 35 mm thick |
| 17 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
| 18 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
| 19 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
| 20 | Supply & Fixing of wiring Sub Main. |
| 21 | Supply & Fixing of Plug Point 15mm. |
| 22 | Lettering & Painting of wall etc. all complete. |
| 23 | Supply and fixing exacts fan etc. all complete |
| 24 | Supply and fixing celling fan etc. all complete |
| 25 | Supply & Fixing of 27watt. CFL etc. all complete. |
| 26 | 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 27 | Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule) |
| 28 | Sub Total (A) |
| 29 | Add/Deduction Rs. For Estimate Figure Amount Match |
| 30 | Grand Total Please Enable Macros to View BoQ information |
