|
| 1 | Dismantling of Single layer Mangalore pattem or similar tiles in roofing |
| 2 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 3 | S&F for Pre-painted Galvalume sheet shall be 0.50mm thick corrugated steel sheet (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. |
| 4 | S&F for Pre-painted 0.50mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. |
| 5 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 6 | S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 7 | Dismantling of wall & celling bords (Fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover filets |
| 8 | S&FGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specifiedas per manufacturere\"s instructions andall as directed. |
| 9 | M&L for 4mm thick non asbestos fibre cement building boards of make \"E\" board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 10 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and cast etc. complete all as specified and directed by Engineer in Charge The demolished material shall be removed away fro the premises |
| 11 | M&L forBrickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 12 | M&L PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in bed blocks,copings and the like including weathering,slightly rounded or chamfered angles and throating as directed complete. |
| 13 | Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed |
| 14 | M & L for flush pointing to random rubble masonry uncoursed or brought up to courses in cement mortar 1:4 |
| 15 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement with WPC.Note:- WPC shall be measured & paid seperately. |
| 16 | M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 17 | M & L for applying two coats of Oil bound distemoer over a coat of primer Chalk whiting, on plastered surfaces, prepara-tory to distempering on newly plastered wall / ceilings surfaces all as specified and as directed. |
| 18 | M&L for preparing new plastered / pointing surfaces and applying Two coats of cement base paint over a coat ofalkali resistant primer on surfaces of walls. |
| 19 | Supply only integral water proofing compound |
| 20 | M&L for complete removal existing treatment and preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion on surfaces of walls including wall care putty, primer and scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 21 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying two coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 22 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 23 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 24 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar aprons etc. |
| 25 | M&L for 18 to 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including moulding or roundingof edges, machine polishing to edge to give high gloss finish complete all as specified. |
| 26 | M&L for machine cut kota stoneflooring18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc as directed by Engineer-In-Charge. |
| 27 | M&L for 60mm thick factory madeglossy finished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed sand in sand cusion, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directedby Engineer-in-Charge |
| 28 | M&L for 20 to 25 mm thick Rough dressed shahabad stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement and sand mortar (1:6),etc complete all as specified and directedby Engineer-in-Charge. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 30 | S&F for light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished of each tiles 600 x 600 mmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 31 | S&F for light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished of each tiles 600 x 600 mmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)each tile 300 x 300mm / 400 x 400 mmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 33 | M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 to 8 mm / 450X 350X 7to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. |
| 34 | Demolition of Plain cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for 75mm thickplain cement concrete 1:4:8 type D2, using 40 mm graded stoneaggregate as in sub base floor |
| 36 | S&F Aluminium framed windows / doors any pattern, fixed/side hung/silding using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, mortice lock, glazing all as specified Note-: glazing shall be measured and paid separatly |
| 37 | Hacking out old broken glasses any thickness, size, quality or description from wooden /Metal frames (any type Frame)glazed with putty or fixed with bead including scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 38 | S&F sheet glass ordinary quality 3 mm thickwith oil putty not exceeding 0.5 sqm in each pane all as specified and as directed including scafolding at any height complete all as specified and directed by Engineer-in-charge. |
| 39 | Ditto all as per above item but pin head type |
| 40 | S&F sheet glass ordinary quality 4.8 mm thickwith oil putty exceeding 0.5 sqm in each pane all as specified and as directed. |
| 41 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 42 | Ditto all as per above item but fixed in repair to steel/wooden shutters |
| 43 | S & F in repairvitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errectingon existing CI brackets including taking down old one alll as specified and as directed. MakeCera Code : S2040121 or other equvelent in approved make. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. |
| 44 | S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest \"P\" or \"S\" trap, including taking down old one completeall as specified and as directed. |
| 45 | S & F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including suitable size of PVC water closet seat cover excluding flush pipe and flushing cystren |
| 46 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet (flush pipe) ball valve, float and handle including brackets and taking down old one complete all as specified and as directed. Make of Cera Code : B1010110 SN or other equvelent in approved make. |
| 47 | S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixedcomplete in wall ,floor etc including taking down old one all as specified and as directed. |
| 48 | S&F in repair suitable size of PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed.MakeCera Code :B1510124 Regular or other equvelent in approved make. |
| 49 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. MakeCera or other equvelent in approved make. |
| 50 | S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm.MakeCera Code : F5013116 / F5015116CH or other equvelent in approved make. |
| 51 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make of Cera Code :F5013110 or other equvelent in approved make. |
| 52 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified MakeCera Code :F8030103 or other equvelent in approved make. |
| 53 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. MakeCera Code :F1015361 or other equvelent in approved make. |
| 54 | S/F in repairs stop valves / angle cock cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).MakeCera Code :F2002201 or other equvelent in approved make. |
| 55 | S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.MakeCeraCode : F1003104 or other equvelent in approved make. |
| 56 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed Make CeraCode : F1015101 or other equvelent in approved make. |
| 57 | S&F in repairs 15mm dia Chromium plated fancy type long body Bib tap cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make Cera Code : F1015151 or other equvelent in approved make. |
| 58 | S&F in repair Chromium plated shower roses 125 mm dia sizewith or without swevel joints and size including fixing to steel pipe or union and 15mm bore 200mm long shower arm. MakeCera Code : F7020305CH or other equvelent in approved make. |
| 59 | S&F shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) |
| 60 | S&F 5.5 mm thick Fancy type beveled edge mirror of selected quality glass and fixed to wooden plugs / aluminium brackets with chromium plated brass screws and cup washers all as specified and as directed |
| 61 | S&F in repairs for SS grating doom 125 mm dia with waste hole or without hole . (Minimum weight 40gms) |
| 62 | S & F in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 63 | Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store |
| 64 | Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store |
| 65 | S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 66 | S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 67 | Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding connecting to existing GI pipe line complete all as specified |
| 68 | Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding connecting to existing GI pipe line complete all as specified |
| 69 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 70 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes. |
| 71 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 72 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y\") equal or unequal with access door. |
| 73 | S&F PVC (SWR) pipes single socketed,75mm dia inanylength with rubber ring joints, laid in trenches or in floors / walls including taking down old pipes. |
| 74 | S&F PVC (SWR)bendsany radius 75mm bore |
| 75 | S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 76 | S&F PVC (SWR)floor trap 75mm dia with grating including jointing with solvent cement |
| 77 | Taking down of shutters of any description exceeding1 sqm each and not exceeding 2 sqm each all as specified and as directed. |
| 78 | S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides . |
| 79 | S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats . |
| 80 | M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 81 | Ditto all as per above item but on steel surfaces over red oxide primer |
| 82 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 83 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010 |
| 84 | Taking downand S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including CP handle, knobs, magnets all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges only shall be paid separately) |
| 85 | S&F in repair butt hinge, mild steel 100mm long all as specified and as directed. |
| 86 | S&F in repair butt hinges mild steel 75mm long all as specified and as directed. |
| 87 | S & F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm |
| 88 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 89 | S&FFloor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed. |
| 90 | S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. |
| 91 | Ditto all as per above item but 150mm long |
| 92 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long |
| 93 | Ditto all as per above item but 100mm long |
| 94 | S&F Hasp and staple, stainless steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws 100 mm long all as specified and as directed. |
| 95 | S&F 300 mm long, mild steel ordinary rat tail rod springs including roller and roller plate complete and taking down old one all as specified and as directed. |
| 96 | S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 97 | Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed |
| 98 | M&L for rendering 10 mm thick in CM (1:4) on roof slab including water proofing compound in top finished even and fair without using extra cement complete all as specified. |
| 99 | Demolition of plain cement concrete(unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified |
| 100 | Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 101 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (ii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq.M (iii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures.(iv) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed |
| 102 | Taking down carefully copper/aluminum point wiring (light /fan /bell / socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody and refixing the same as per existing minor items like screw,clamp, casing/capping is includedcomplete all as specified and directed Engineer-in-Charge. |
| 103 | Taking down existing Armstrong/Grid Ceiling light 36 Watt/Tubelight fittings of any type and any wattage for repair and refixing the same after repairs to its original position including replacement of cable PVC insulated unsheathed with copper conductor of size 1.5 Sqmm (2 runs) upto 0.5 mtr length from light fitting to Ceiling rose including coonections all as ditected. |
| 104 | M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module )for fixing modular switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed.Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2.All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc |
| 105 | One light point controlled by switch5 Amp single pole one way |
| 106 | One Ceiling fan/exhaust fan point controlled by one switch5 Amp single pole, one way |
| 107 | One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch |
| 108 | One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board |
| 109 | All as per Item No 104(here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board |
| 110 | S&F Modular Switch, 6 Amp, one way, one Module as per existing.etc complete all as specified and directedby Engineer-in-Charge |
| 111 | S&FModular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directedby Engineer-in-Charge |
| 112 | S&FModular Socket Outlet6 Amp,3 pin, combined two module etc as per existing complete all as specified and directedby Engineer-in-Charge. |
| 113 | S&FModular Socket Outlet6 Amp / 16 Amp - 2/3 pin combined two moduleas per existing etc complete all as specified and directedby Engineer-in-Charge |
| 114 | S&FModularFan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directedby Engineer-in-Charge |
| 115 | M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directedby Engineer-in-Charge |
| 116 | Supply and fix exhaust fan, PVC body AC single Phase. 230V, copper winding of size 200 mm sweep with,blades,and frame and louvers completeall as specified and directed. |
| 117 | Supply & fix in replacement 36 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,6500 K suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 36 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directedby Engineer-in-Charge . |
| 118 | Taking out/downand opening of existing ceiling fans 1200 mm sweep from any position, of any make etc & refixing at the desired location after reassembling andafter servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material /items , making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed. |
| 119 | Material and labour for preperation of ceiling fans 1200 mm sweepof any make by cleaning of metal surfacesincluding painting with spray painting on required gloss with white synthetic enamel paint on complete body of fans and writing MES No with black synthetic enamel paint etc complete all as specified anddirected by Engineer-in-Charge |
| 120 | Supply and fix in replacement Industrial type Aluminium housing ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack Industrial type LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cableof size 0.5 Sqmm withcompletewith all accessories etc complete all as specified and directedby Engineer-in-Charge. |
| 121 | Supply & fix in replacement energy saving and environmental friendly long life LED street light 35 Watt (Bldg security light) made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Top Opening seperate driver compartment with IP66 protection and impact resistance of IK08 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directedby Engineer-in-Charge |
