|
| 1 | Demolition of PCC/lime concrete (Other than Ground flooors) terracingincluding felt in any description and in any position over roof etc complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 3 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 4 | M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed. |
| 5 | M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles as directed. |
| 6 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately assupply. |
| 7 | Supply only integral water proofing compound complete all as specified and as directed. |
| 8 | M&L applying water proofing treatment with the following-(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membranecomplete all as specified and as directed. |
| 9 | Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed |
| 10 | Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed |
| 11 | Supplying, fixing, jointing and testing 15mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed |
| 12 | Supplying, fixing, jointing and testing 20mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed |
| 13 | Cutting chases,pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick wallscomplete all as specified and as directed. |
| 14 | S & F 1000ltr rotational moulded polyethylene water storage tanks,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 15 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed |
| 16 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 18 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 19 | M&L for coloured dark shed glossy ceramic tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.36sqm but not exc 1.00 sqm, in floors of roomand verrandah etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etccompleteall as specified and as directed. |
| 20 | M&L for dark coloured ceramic glossy tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.36 sqm but not exc 1.00 sqm, in dado/skirting of room and varandah etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etccompleteall as specified and as directed. |
| 21 | M&L for dark coloured ceramic glossy tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.16sqm but not exc 0.36 sqm, in floorof kitchen and bathroom etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor incudingrendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tilesetccompleteall as specified and as directed by the Engr-in-Charge. |
| 22 | M&L for 17-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete. |
| 23 | Demolition of PCCin any description and in any positionetc complete all as specified at site |
| 24 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 25 | M&L for 40mm thick cement concrete type B2, 1:2:4 (12.5mm graded aggregate) as in floor/ hardstanding finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD paint over2mm thick in two layers putty complet all as specified and as directed. |
| 27 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed. |
| 28 | M&L Fly ash modular brick work with sub class \"B\"brick straight or curved on plan exc 6m mean radiusbuilt cement mortar 1:4 complete all as specified and as directed |
| 29 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. |
| 30 | M&L for rendering 10mm thick on fair faces of wall even and fair finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed |
| 31 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 32 | M&L for rendering 15mm thick on fair faces of wall even and fairfinish without using extra cement onconc/brick surfaces in CM 1:4, complete all as specified and as directed |
| 33 | S&F 30mm thick FACTORY MADE half glazed/ Skeleton WIRE MESH SOLID WPC both side Plain DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. S.Sbutt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. complete all as specified and directed |
| 34 | S&Fstainless steel barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed |
| 35 | S&F stainless steel 150 mm handle size etc complete all as specified and as directed |
| 36 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 37 | Material & Labour for applying two coat of 100% Premium acrylic exterior weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm overapplying 2mm thick wall care water proof puttyin two layers on wall sufacecomplete all as specified and as directed by Engr-in-Charge. |
| 38 | S&F 300mm, stainnesssteel ordinary rat tail rod pattern springs (Spring for door) including roller and roller plate complete |
| 39 | S&F 150mm, Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 40 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 41 | Taking down chowkhat or frames with shutters of any type (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. |
| 42 | S&Fin rep 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white orcolourto make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer - in - charge.Make:-Rajshri or equivalent |
| 43 | S&F Hasp & staple safety type aluminium anodized with stainless steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete. |
| 44 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 45 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (all as directed and specified by Engineer-in-Charge. |
| 46 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: stainless steel butt hinges 03 Noswith with 32mm long SS screws and Other hardwares should be fixed with 19*6mm size steel screws etc.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 47 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note: Each shutter shiould be fixed with stainless steel butt hinges 03 Noswith 32mm long SS screws and Other hardwares should be fixed with 19*6mm size steel screws etc. |
| 48 | S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC both side Plain DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. S.Sbutt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. complete all as specified and directed. |
| 49 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 50 | M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed. |
| 51 | M & L secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 52 | S & F powder coatedaluminium sliding window/ventilator shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg/Rm top and bottom rail of shutter of weight not less than 0.368 Kg/m in two pannels and shutter with including necessary aluminium fittings and 5mm thick selected quality tinted glass and third one with and incl stainless steel wiremesh etc cover aluminium decogrill as approved by GE fixed with standed aluminium channel out side with incl handle cleat, glazing clip special auto lock dry set rubber gasket complete all as specified and as directed NOTE : (i)The minimum thickness of powder coating shall be 50 micron. (ii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer. |
| 53 | M&L foraluminium powder coated/Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. S & F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S & F powder coated butt hinges type C-1,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter ,mortise lock , brass body ,6 levers ( 1 No) with duplicate keys, aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtteretc complete all as specified and as directed. Note: (i) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . (ii) The minimum thickness of powder coating shall be 50 Micron complete all as specified |
| 54 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F powder coated aluminium window and ventilator shutters,side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified and directed by Engr-in-Charge. |
| 56 | S&F Stainless steelwire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 57 | S&F stainless steeltower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed |
| 58 | S&Fstainless steelcast type anodized 150 mm size etc complete all as specified and as directed |
| 59 | S&F 300 mm longstainless steelsliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed |
| 60 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindware with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 61 | S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. |
| 62 | S & F in repair Vitreous China Ware Wash hand basin white table topflat back, size 550 x 400 mm size(flat back or angle back type)including fixing of bottle trap, cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed. |
| 63 | S & F 3mm Mirror glass of selected quality glass, mounted on 6mm thick PVC board and fixed with stainless steel/Chrominum plated screw/nut and cup washer complete all as specified and directed by the Engr-in-Charge. Make : Prayag/Prima/Modi |
| 64 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. |
| 65 | S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flangecomplete all as specified and as directed. |
| 66 | S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. |
| 67 | S&F in repair 15mm bore fancy type chromium plated bib cock long body with flangeetc complete all as specified and as directed. |
| 68 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixedall as directed. |
| 69 | S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 70 | S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed |
| 71 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixedcomplete all as specified and as directed. |
| 72 | S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed |
| 73 | S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed |
| 74 | Supply and fix in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge . |
| 75 | S&F in repairCP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge |
| 76 | S&F in repair 25 mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. |
| 77 | Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and as directed. |
| 78 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall incuding iron clips 04 Nos and complete all as specified and directed. |
| 79 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wallincluding iron clips 04 Nos and complete all as specified and directed. |
| 80 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 81 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 82 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. |
| 83 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 84 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 85 | S&F MS chromium plated peg set of five fixing with wall complete all as specified and as directed. |
| 86 | S & F3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 87 | S & F3 mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 88 | M&L,PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 89 | M&L, sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified |
| 90 | M&L framed work as grills in window and chowkhat or iron door , gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and directed. |
| 91 | S&F, mild steel 0.80mm thick, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed |
| 92 | M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed. |
| 93 | M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. |
| 94 | M&L for applying two coat of Black Japan paint over a coat of red oxide primer on steel surfaces of any descripition over 10 cm width or girth etc complete all specified and directed. |
| 95 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for sinkscrewed down for iron pipe and fixedcomplete all as specified and directed. |
| 96 | S&F 15mm dia CP Wall mixer including Hand showermixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed. |
| 97 | M & L for complete removal of existing treatment of any description from walls and applying two coat of OBD paint over a coat of primerover 1 mm thickwall care putty(JK/Birla wall care putty ) including prepration of surfaces as per manufacurers instructions etccomplete all as specified and as directed. |
| 98 | M & L for complete removal of existing treatment from walls and appying two coat of exterior weather proof paint over a coat of primer over 2mm thick wall care putty in two layers ( JK/Birla wall care putty)including prepration of surface complete all as specified and as directed. |
| 99 | M&L, Preparing old plastered surfaces of ceiling and applying one coat of white washcomplete all as specified and directed. |
| 100 | M&L 60 mm thick machine pressed rubber moulded coloured precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement &pigment complete all as specified and directed. |