|
| 1 | Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutter from the frames) completeall as specified and directed |
| 2 | Taking down chowkats or framesexc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed |
| 3 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and all as specified and directed |
| 4 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories all as specified and directed. Net opening will be measured for payment purpose.) |
| 5 | Providing and fixing factory made uPVC Sliding window(any colour decided by Engineer-in-charge) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories all as specified and directed. (Area exceeding 2.00 sqm each)(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net Opening will be measured for payment purpose. |
| 6 | S & F for factory made uPVC openable window/ ventilator single panel as per following details. A) Outer frame for double leaf shutter. B) openable shutters with suitable hinges for both glazed and gauzed (Wiremesh) shutters. C) Suitable handles and locking system for shutters. . Note:-1) Size of the uPVC sections shall be as per manufactories catalogue of Villa windows series of M/s OKOTech or equivelant complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii).Rate inclusive of making good jambs and reveals etc all as specified and directed |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strengthproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture |
| 9 | S & F sheet glass ordinary quality 4.8 mm thick but n exc 0.5 sqm in each pane and glazing with oil putty /glazing clips of any description completeall as specified and directed |
| 10 | All as per Item No 9 above , but exc 0.5 sq. m in each pane all as specified and directed |
| 11 | S & F Figured glass, pin headtype and glazing withoil putty in squares nexc 0.5 sq. m in eachpane complete all as specified and as directed . |
| 12 | Supply and fixingaluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples orfixing with beads to joinery when fixed in panels of joinery, complete all as specified and as directed . |
| 13 | M&L for 18/19mm thick prelaminated marine plywood, High quality BWP Marine grade, prelaminated on both side with decorative choice lamination , fixed with stainless steel screws to frame work as in cupboard shutter, study table etc complete all as specified |
| 14 | S&F 250mmlong Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloyall as specified and as directed . |
| 15 | S & F 200 mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed . |
| 16 | S & F 150mm long extruded aluminium alloy handles fabricated type anodised all as specified and directed. |
| 17 | S & F 100 mm long SS butt hinges, medium weight cold rolled all as specified and as directed . |
| 18 | S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to theexisting window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement andall as specified and directed |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 20 | Material & Labour for providing and fixing stainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereverrequired) and fitting the same with necessarystainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement all as specified and directed |
| 21 | Material & Labour for 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and directed. |
| 22 | M&L for Complete removal of existing treatment on old wall surfaces & preparation of surfaces of walls and applying two coat of oil bound distemper over a coat of primer over two coats of wall care putty complete all as specified and directed. |
| 23 | M&L for preparing old plastered surface and applying one coat of white wash to ceiling complete all as spd & directed. |
| 24 | M & L for Complete removal of existing treatment on old wall surfaces &preparation of surfaces of walls and applying Twocoats of acrylic emulsion weather proof paintand including priming coat of exterior primer complete all as specified and directed. |
| 25 | Dismantling floor, hearth orwall tiling including cementmortar bedding (but notbacking), removing serviceabletiles to store and rubbish off thepremises complete all as specified and directed. |
| 26 | M & L Anti skid coloured ceramic tiles 9 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors over15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | M & L glazed coloured ceramic tiles450 X 350 X 7mm thick / 350x250x7mm as in skirting/ dados,set and jointed in neat cement slurry and pointed in white or coloured cement to match , over 10 mm thick rendering in CM 1:4 etc complete all as specified and directed. |
| 28 | M & L 18-20mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cementmortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to matchwith shade of granite all as specified and directed. |
| 29 | Material & Labour for providing and fixing CP brass single lever concealed diverter system of approved make for shower, with overhead shower (100 mm dia), hand shower with 1.5 m flexible hose and wall bracket, bath spout, and bib tap outlet, including all fittings, testing and commissioning complete, fixed in wall with cutting and making good the same, all as directed by the Engineer-in-Charge (Make: Jaquar / Kohler / Duravit or equivalent)) all as specified and directed. |
| 30 | Material & Labour for providing and fixing wall hung European type white vitreous china water closet with P/S trap, concealed dual flush cistern (3/6 L), flush plate, heavy-duty concealed frame, soft-close seat cover and all fittings, including cutting and making good walls and floors, complete as per direction of Engineer-in-Charge. (Make: Jaquar / Kohler / Duravit or equivalent)” all as specified and directed |
| 31 | Material & Labour for providing and fixing Table-top wash hand basin of white vitreous china of approved make (Jaquar / Kohler / Duravit or equivalent), size not500×420 mm, including single or double tap hole as required; fixing with silicone sealant; including CP brass pillar tap (heavy duty), 32 mm CP brass bottle trap with extension pipe, CP brass waste coupling, flexible inlet connection hoses, necessary brackets/supports, cutting and making good the counter, and all completeall as specified and directed.” |
| 32 | S & F in repairs PVC connection15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 33 | Supply and fix in repairs 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixedcomplete.all as specified and directed. |
| 34 | Supply and fix in repairs15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe all as specified and directed. |
| 35 | Supply and fix in repairs PVC floor trap plain with grating incl jointing with solvent cement. Dia of outlet 75mm.all as specified and directed. |
| 36 | Supply and fix in repairs15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe all as specified and directed. |
| 37 | Supply and fix in repairs20 mm dia tubular towel rail brass cromium plated, D type,60cm long between flangesincluding one pair of brackets all asspecified and directed. |
| 38 | S&F in repairsangle valves, 15 mm diacast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed all as specified and directed by Engineer-in-Charge . |
| 39 | Supply and fix in repairs Stop valves,15mm dia ,fancy type, chromium plated with long shank and cup (concealed type) , screwed both ends for iron pipe or for unions all as specified and directed. |
| 40 | Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.all as specified and directed. |
| 41 | S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making goodand also cutting, screwing and waste all as specified and directed |
| 42 | S & F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 43 | S & F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 44 | S&Fin repairs Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube andABS wall hook including makingconnections and fixed in position completein all respect as specified. |
| 45 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed |
| 46 | Supply an Fixing in repair of CPVC pipes 16 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 47 | Supply and Fixing in repair of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 48 | S&F in repair32 mm dia PVC waste pipe90 cm long fexible type for Wash basin complete alll as spd & directed. |
| 49 | S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed. |
| 50 | S&F in repairs glass corner shelf 230×230 mm size, 8 mm thick glass corner shelf with brass / stainless guard rail and wall-mount brackets, including rawl plugs, screws, silicone sealant, and making good wallsall as specified and directed. |
| 51 | Demolition of Brickworkboulder masonry, built in cement mortar including all quoins, arches, pillars, etc., as directed by Engg in Charge |
| 52 | Excavation in trenches n exc 1.5 m wideandn exc 1.5 m depth in hard dense soilfor foundation etcor for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed. |
| 53 | Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/disintegratedrockall as specified and directed. |
| 54 | Removing the excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing where all as specified and directed. |
| 55 | Material and labour PCCM30(using 40mm graded stone aggregate) as in mass concrete, foundation filling etc complete all as specified and directed. |
| 56 | M&L RCC typeM30(using 20 mm graded aggregate ) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 57 | M&L RCC M30(using 20 mm graded aggregate ) for Columns, pillars, piers,posts and struts complete all as specified and directed. |
| 58 | M&L RCC M30(using 20 mm graded aggregate ) for slab supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc.all as spd and directed. |
| 59 | M& L for TMT bar FE 500D for dia equal to& greater than 10mm diacut to length, bent to shape required including cranking, bending spirally for hooping for columns /footings etc hooking ends and binding with and including mild steel wire annealed not less than 0.9mm diaetc complete all as specified and directed |
| 60 | Ditto as above item 59 but 5mm dia over upto 10mm dia in stirrups, spacers and bindersall as specified and directed. |
| 61 | Formwork to sides of concrete foundations, footings,bases of columns, raft and footing beams, sides and soffits (if any) of foundations and plinth beams ; and similar work complete all as specified and directed. |
| 62 | Form work to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concreteall as specified and directed.. |
| 63 | Form work to soffits of suspended slabs flat surface of concrete finishedrough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 64 | M & L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE 410-W(Gde E-250) Quality A all as specified and directed. |
| 65 | M & L preparation of new or previously untreatedsteel surfaces, of any description over 10cm in width orgirth, not otherwise described and applying two coats of synthetic enamel paint over red oxide zinc chrome primingcomplete all as specified and directed. |
| 66 | M & L preparation of oldsteel surfaces, of any description over 10cm in width orgirth, not otherwise described and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 67 | Demolition Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 68 | Material and labour for hard core of broken stone aggregate gauge not exceeding 63 mm deposited spread and leveled in layers n exc 15 cm thick, watered and well rammed to a true surface all as specified and directed |
| 69 | Material and labour PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring with 75mm thickness all as specified and directed |
| 70 | Material and labour 40 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone agg) as in floor finished even and smooth without using extra cement all as specified and directed. |
| 71 | M & L for providing/ placing Glass dividing strips, 3 mm thick and inserted in position 38 mm width,complete all as specified and directed |
| 72 | M & L for Pre-cast cement concrete block masonry with PCC 1:3:6 Type C1( 20mm graded stone aggregates)solid blocks set in cement mortar 1:6 , exc. 10 cm in width and setting in mortar, complete all as specified and directed |
| 73 | Taking down cement plaster any description over wall and ceiling surfaces including at any height complete all as specified and as directed |
| 74 | M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:6all as specified and directed |
| 75 | M&L for Rendering 15 mm thick in CM 1:4 (mixing with liquid water proofing compound) on block/ brick masonry, finished even and smooth without using extra cement complete all as specified and as directed. (Note: water proofing compound will be measured separately) |
| 76 | Supply only Liquid water proofing compound all as specified and directed |
| 77 | Taking down aluminium/Copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, sunken MS boxes,MCB DBs etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed plaster surfaces of wall, floor, ceilingand painting 2 coat of white wash/distamber to meet the existing surface and removing materials and debris to reinstate the premise neat and clean complete all as specified and directed. |
| 78 | M&L for point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multistranded copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLS ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for the following: - |
| 79 | Ditto but One light point controlled by one switch |
| 80 | Ditto but One light point controlled by two two way switches |
| 81 | Ditto but One bell point controlled by one bell push |
| 82 | All as per item No 78 here in before but for one ceiling fan/exhaust fan point controlled by one switch/ceiling fan regulator. |
| 83 | All as per item No. 78 here in before but for one switch socket outlet 3 pin 5 Amps on independent board |
| 84 | All as per Sl No 78 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently |
| 85 | All as per Sl No78 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently |
| 86 | M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable4 runs of 10 sqmm drawn through in and incl suitable size PVC rigid conduitand all accessories fixed concealed to wall/floors along with one run of 10 sqmm PVC insulated unsheathed FRLS copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.Note: (a)4 runs of 10 sqmm cable along with onerun of 10 sqmm cable for earth conductor PVC conduit shall be measured as one length including taking down UNSV old wiring. all as specified and directed |
| 87 | M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable4 runs of 6 sqmm drawn through in and incl suitable size PVC rigid conduitand all accessories fixed concealed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed FRLS copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.Note: (a)4 runs of 6 sqmm cable along with onerun of 6 sqmm cable for earth conductor PVC conduit shall be measured as one length including taking down UNSV old wiring. all as specified and directed |
| 88 | M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable2 runs of 6 sqmm drawn through in and incl suitable size PVC rigid conduitand all accessories fixed concealed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed FRLS copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.Note: (a)2 runs of 6 sqmm cable along with onerun of 6 sqmm cable for earth conductor PVC conduit shall be measured as one length including taking down UNSV old wiring. all as specified and directed |
| 89 | S&F Switch modular type one way 6 Amps , one module |
| 90 | S&F Switch modular type two way 6 Amps , one module |
| 91 | S&F Bell push modular type 6 Amps , one module |
| 92 | S&F Modular socket 2/3 pin multi purpose flush type 2 modular 6 Amps. |
| 93 | S&F Switch modular type one way 16 Amps , one module |
| 94 | S&F Modular socket flush type multi purpose 6A/16A-6 pin combined 2 module |
| 95 | Supply & fix modular type fan step regulator 360 Degree rotatable type 120W - 2 Module.Make for Items 3 to 8:Legrand Myrius / Philips Sleek / Schneider Electric Opate or its equivalent as per Annexure. |
| 96 | S&F bell AC 230V single pole all as specified. |
| 97 | S&F in repair for Ceiling rose 65x50mm surface PVC / Polycarbonate, isolated body with three terminals all as specified and directed. |
| 98 | S&F in repair for AC box modular socket type with MCB SP 25 Amps 10 KA operating on 240 volts AC with plug top all as specified and directed. |
| 99 | S&F LED decorative wall light fixture made up of polycarbonate double bulb with glass in and including 10W LED bulb all as specified and directed. |
| 100 | S&F LED decorative ultra slim round profile lighting fixture with extruded polycarbonate, environment friendly energy efficient of 4\"x20W on wall/ceiling all as specified and directed. |
| 101 | S&F LED decorative ultra slim round profile lighting fixture with extruded polycarbonate, environment friendly energy efficient of 2\"x10W on wall/ceiling all as specified and directed. |
| 102 | Supply and Fixing of 30W High efficient LED Building Securitylight fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover, efficacy of the Luminarie is 100 lm/W, IP:66 protected with IK05 impact resistance with electronic driver complaint to IEC safety standards with a power factor>0.95, voltage variation range 150-270V, THD<10%, High and low protection along with a surge protection of 3.5 KV including provision of 32/40mm dia GI light grade pipe1.5 meter length bend to shape and necessary MS clamps with nut bolts etc for fixing the light fittings on pole/wall fixed complete all as directed. Note : All metallic parts shall be painted with two coat of synthetic enamel paint of colour approved by Engr-in-Charge/GE over a coat of red oxide primer and the rate for the same shall deemed to be included in the item rate all as specified and directed. |
| 103 | Supply and fix energy efficient LED surface/recessed mount light Fitting square type 2 feet x 2 feet size 40 Watts with higher efficacy, full diffuser providing uniform light including three core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro /Havells/Phillips |
| 104 | Supply and fix energy efficient LED ceiling type surface/recessed mount light Fitting round type 18/20 Watts with higher efficacy, full diffuser providing uniform light including three core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro /Havells/Phillips |
| 105 | Supply and fix LED type mirror light fitting 11W white/Warm white colour with aluminium die cast body white colour IP 20 rating all as specified and directed. |
| 106 | Supply and fix LED bed lamp of 5W fixed on wall all as specified. |
| 107 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. |
| 108 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers all as specified and directed. |
| 109 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers all as specified and directed. |
| 110 | Supply and fix Wall mounting BLDC fan white colour 35W, remote 6 speed fan pull chords portable swing noiseless with 3 blades, air delivery 76 CMM,400mm sweep,1500RPM, blade material ABS plastic all as specified and directed. |
| 111 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm all as specified and directed |
| 112 | Supply and fix MCCB 415V,16KA, 4 Pole 100A all as specified. |
| 113 | S&F Vertical type MCB DB with sheet metal enclosure double door type concealed on wall Triple pole and neutral 6 way 415V with 200A rated bus bar suitable to fix 100A MCCB, 415V, 16KA as incomer all as specified and directed. |
| 114 | S&F MCB DB with sheet metal enclosure double door type concealed on wall Triple pole and neutral 4 way 415V with 200A rated bus bar all as specified and directed. |
| 115 | S&F MCB DB with sheet metal enclosure double door type concealed on wall single pole and neutral 12 way 240V with 200A rated bus bar all as specified and directed. |
| 116 | Supply and fixing RCBO for earth leakage,overload and short circuit protection 63A , four pole 300mA all as specified. |
| 117 | Supply and fixing 40 to 100 Amp rating 415V, 10KA \"C\" curve miniature circuit breaker (MCB) of Trible pole and Neutral in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 118 | Supply and fixing in repair 40 to 63 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole and Neutral in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 119 | Supply and fixing in repair 5 to 32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning. all as specified and directed |
| 120 | M&L for Earthing complete by using GI earth plate electrode 60cm × 60cm × 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to using GI earth lead of size 4mm dia by means of bolts, nuts, check nuts and washers etc made of galvanised iron and protected by galvanised iron light grade 25 mm bore & 20mm dia galvanised medium grade for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50 mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m, charcoal, lugs, common salt completeall as specified and directed and as shown on plate No.3 of SSR Part-I . |
| 121 | Supply and replacement of electric meter box thermoplastic polycarbonate meter boxes IP65 in accordance with IEC60529, environment friendly, recyclable, UV resistant, halogen & silicon free, anti-acid & anti corrosive suitable for harsh environment with hinged transparent lid of suitable size to fix 1No three phase KWH meter and 1 No 3 phase MCCB 100A. Note :rate shall deemed to be included in removing of threee phase meter and refix in new meter box all as specified and directed. Make : Hensel/Sintex or equivalent |
| 122 | Supply and fix instant electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 10 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece et all as specified and directedc. |
| 123 | S&F in repairsgun metal non return valve of size 20 mm diaISI maked ,screwed complete all as specified and directed. |
| 124 | M&L for replacement of hot water CPVC pipe of 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete duly insulated with glass wool and aluminium cladding all as specified and directed. |
| 125 | S&F in repair Stop valves, 25mm dia cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 126 | S&F in repair Brass CP mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixedall as specified and directed |
| 127 | M&L for Water tanks of capacity 500Ltr , open or closed,hoisted and fixed in positionall as specified and directed |
| 128 | Supply and lay in trenches burnt bricks sub-class ‘B’ size designation 75 for cable protection all as specified and as directed. |
| 129 | Supply and laying only in trenches or passing through pipes/ poles etc LT XLPE cable heavy duty 1100 Volts grade 16 Sqmm 4 core with aluminium conductor of the following connections with provn of cable lugs and glands as required of following sizes all as specified and directed. |
| 130 | Supply and fixing LED street light fitting60Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 131 | Supply and fixing Cable Junction box made out of polycarbonate material IP66 with metric knockouts for cable entry for 10-16 Sq mm cable size 155x210x92mm including 1 No MCB 10 Amps with DIN bar and 4 Nos FRP insulators and fixing the box to street light pole made of 25x 3mm flat iron with clamps, nuts and bolts complete as per Cat No.DK 1616G of Hensel or equivalent make all as specified and directed by Engineer-in-charge |
| 132 | S & F astronomical and digital time switch suitable for operation on 230 Volts AC complete all as specified and directed. Make : Havells/L&T or equivalant |
| 133 | S&F PVC copper cable, 3 core, multi stranded of size 1.5 Sqmm in and including PVC rigid conduit of size 20mm medium grade with all accessories as per site requirement fixed on pole with GI plate of size 20x3mm and GI nut,bolt and washer etc, all as specified and directed. |
| 134 | M&L for Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in foundation with four foundation bolt embedded in the PCC for fixing of GI street light pole of 8 mtr height, with GI nut and washer of suitable size includingfinishing to exposed concrete surfaces even and fair and provision of necessary form work for rough finished surfaces complete all as specified.Note; Pole will be measured seperately |
| 135 | Supply and installation of steel tubular pole with Polygonal/Octagonal GI pole, hot dip galvanised (thickness of galvanisation not less than 65 microns), thickness of sheet not less than 3mm, thickness of base plate not less than 16mm, pole bottom dia 130mm and top dia 70mm with four GI foundation bolts of suitable length and dia, length of pole 7 metres all as specified and directed. (Note :- Excavation,earth work & PCC etc shall be measured and paid seperately under relevent item) Make- Crompton/Bajaj or equivalent. |
| 136 | Supply and fix GI bracket of length 1.2Mtr bend to shape fabricated from GI light grade pipe of bore dia 40mm mounted on pole with GI clamps,nut bolts and washers etc,for fixing street lightall as specified and directed |
| 137 | Supply and fix LED bollard light 10W IP 65 rated inverted pyramid tripod type with soft 360 degree light distribution fixed on and including PCC clolumn of size 30x30x45cm with bolt and nut,excavation and earth work etc, all as specified and directed |
| 138 | Supply and fix all-in-one LED Solar street light with high efficiancy mono crystalline Solar PV module ,Lithium Ferro Phosphate battery with in built Battery Management System (BMS) technology,high efficacy LED,MPPT solar charge controller and aluminium extruded body with PIR motion sensor automatically control the dimming and brightness of light with following technical specification:- all as specified and directed(a) Solar Panel - 70W(b) LED Power - 30W(c) Battery Capacity - 36Ah(d) Lumen output - >3800lm(e) Viewing angle - 120 degree(f) Autonomy - 2 days(g) CCT(K) - 5700K |
| 139 | Supply and fix post top LED light 35watt with IP65 protection to impact and corrossion glare free and better uniformity mounted on and including GI pipe of bore dia 40/50mm all as specified |
| 140 | M&L for road cutting, including excavation, returning filling in, spreading, levelling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, completeall as specified and directed |
| 141 | Supply and lay in trenches/under roads/crossingsor fixed to wall/pole, GI tubing light grade of 40mm dia size for protection of UG cables :-Note : Payment for excavation and earth work shall be paid for separately under relevant items of Schedule. all as specified and directed |
