|
| 1 | Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose soil for laying of cables etc complete all as specified and as directed. |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft / loose soilcomplete all as specified and as directed. |
| 3 | Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 4 | Material and labourfor sand filling in trenches with clean dry unwashed sand for cushioningof under ground cable in layers of 23cm thick (8 cm before laying the cable and 15 cm thick after laying the cable) including watering and consolidation, complete all as specified and as directed. Note : Punned thickness of sand will be measured. |
| 5 | Supply and laying of sub class B bricks laid flat adjacent to each other perpendicular to the direction of U/G cable all as specified and directed. |
| 6 | M & L for GI tube light grade ISI marked laid in trenches in road crossing or fixed on pole with clamp made out of MS flat 25 x 4mm with bolts, nuts and washer of suitable size for cable protection of size 40 mm dia complete all as specified and as directed. |
| 7 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 8 | Supply and fixing isolator FP, 415 volts, 63 Amp complete all as specified and directed. |
| 9 | Supply and fixing for Street light pole terminal box (IP 66) made of thermoplastic polystyrenejunction box size 155 x 210 x 92mm with integrated elestic membrance for cable entry via cable gland fitted with 1x MCB 16 A SP and suitable pole mounting clamp and two polyamidecable gland with its locknut model No 1555.32.25, one glnd for incoming and one for out going and one gland m 25 gland (1555.25.17) will be used for street light etc complete all as specified and directed Make Hensel , NTC Kanpur or equivalent as approved by Engr-in-charge. |
| 10 | Supply and fixing isolator DP,63 Amp ,complete all as specified and directed. |
| 11 | Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 12 | Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 13 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 14 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 15 | Supply and fixing bracket made of 32 mm dia MS pipe bend to shape at 120 degree and to be fixed on pole for street light fitting with 2 Nos MS clamps made of 32 x 6mm and not less than 1.2 m long and all as directed by Engr-in-Charge. |
| 16 | preparation of old painted surface of LT steel tubular poles of any type/size and painting with one coat at aluminium paint to Exposted surface of poleand back paint in strips after native 30 cm wide up to 1.5 mtr from ground level including making of pole No\"s with paint all as specified. |
| 17 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated, stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed from pole box to street light fittings of size 2.5 Sqmm 2 core multistranded cable including PVC conduit 25 mm to be fitted on pole with MS clamps of 18 X 3 mm (3 nos) from terminal box to street light fitting complete all as specified and directed. |
| 18 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core |
| 19 | All as per item No. 18but 35 Sqmm3.5 core. |
| 20 | All as per item No. above but 25 Sqmm 4 core. |
| 21 | All as per item No. above but 95 Sqmm3.5 core. |
| 22 | Supply only DO Fuse for 11 kv5Amps to 7.5 Ampscomplete all as specified and directed. |
| 23 | Taking down old Unsv UG cable off size from trenches complete all as specified and directed. |
| 24 | Taking down street lights including all accesseries complete all as specified and directed. |
