|
| 1 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed. |
| 2 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 3 | S&F 4 mm thick black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified & directed. |
| 4 | S&F aluminium anodised barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified & directed. |
| 5 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified & directed. |
| 6 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 7 | M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 8 | M&L for100mm thick plain cement conc type C-2, 1:3:6using 40 mm graded crushed stoneagg as in sub base complete all as specified and directed. |
| 9 | M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified & directed. |
| 10 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006of 80 mm thickness M-35 Grade with grey cement complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified & directed |
| 12 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed. |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. |
| 14 | Removing Excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 15 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation filling, mass concrete complete all as specified and directed. |
| 16 | M&L for M-25 (20mm graded aggregates) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under-reamed piles and mass concrete complete all as specified & directed. |
| 17 | M&L M-25 (20mm graded aggregates) for columns, pillars, piers, posts and struts complete all as specified & directed. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete flat complete all as specified & directed. |
| 19 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square or rectangular complete all as specified & directed. |
| 20 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L for TMT bars 6mm to 8mm dia and over as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 22 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding6m mean radius, built in CM (1:6) complete al as specified and directed. |
| 23 | M&L for rendering 10 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified. |
| 24 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 25 | M&L for mild steel work in roof trusses,purlins,rafters,wind ties,crane gantries,posts,rails and fastenings and heavy bracket framing (Beam,Tee,Angle, Channel or Flat sections) including distance pieces,cleats etc complete all as specified and directed. |
| 26 | S&F MS plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, with fixing attachment,Fe-290(Gde E-165) complete all as specified & directed. |
| 27 | S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self taping screws complete all as specified & directed. |
| 28 | S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed self tapping screwscomplete all as specified and directed. |
| 29 | M&L for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed. |
