Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and not otherwise specifically provided for complete all as specified and directed. |
| 2 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for 40mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregates as used in levelling course complete all as specified and directed. |
| 4 | M&L for 10mm thick vitrified coloured ceramic tiles (light shade premium quality) (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 5 | All as per srl item No 04 above but on skirting laid over with and including 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed. |
| 6 | M&L for non skid joint free ceramic tiles coloured designer pattern as required of 7 to 8mm thick (square/rectangular) (premium quality) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed. |
| 7 | M&L for glazed joint free ceramic tiles coloured designer pattern of size 600X300X7-8mm thick on vertical surfaces (premimum quality) such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including exc 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed. |
| 8 | M&L for glazed joint free ceramic tiles coloured of size 300X200X7-8mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including exc 10mm thick backing coat in CM 1:4 and tringular filleting in CM 1:6 on top of tiles complete all as specified and directed. |
| 9 | Demolition of stone slab/tiles of any description or thickness laid, bedded and pointed in cement mortar/in floor, skirting, hard standing, apron etc complete all as specified and directed. |
| 10 | M&L for 18-20mm thick Granite (of any type and shade) work table rubbed and pre polished as used in cooking/working platforms, staircase incl riser & tread, steps, jambs, pillars, windowcills, partition and similar work in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of Granite with including 15mm thick backing coat in CM (1:4) including tringular filleting in CM 1:6 on top of tiles complete all as specified and directed by Engr-in-Charge. complete and ensure best adhesion to surface complete all as specified and directed. |
| 11 | M&L for Green marble work 18 to 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing in required shape and size as in used floors and like laid over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 12 | M&L for machine cut cudappah stone slab 25-30mm thick for vertical and horizontal supports to platforms for Granite and marble works to any purpose and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as specified and directed. |
| 13 | M&L for hand cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing on new surface of kota stone to give high gloss finish complete over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and directed. |
| 14 | M&L for hand cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar and laid over cement screed and jointed with pigment to match the shade of the slab including mirror polishing on new surface of kota stone to give high gloss finish complete over and including 10mm thick backing coat in CM (1:4) and tringular filleting in CM 1:6 on top of kota at required place complete all as specified and directed. |
| 15 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 16 | M&L for mirror polishing on new/existing of marble/Granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. |
| 17 | Dismantling of boarding, any description fixed in any position with nails i.e. false ceiling and wall lining etc and similar position fixed with screws complete. |
| 18 | S&F in true horizonal level false ceiling using non asbestos (fibre cement) pre-painted decorative tiles of size 595x595x4mm thick manufactured by V-board or techno commercially equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised Steel section, exposed surface with pre-coated capping, main tee of size 24X38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24X32mm, having 0.25mm gauge at 1200mm c/c & Wall angle of size 19X19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire with and including dismantling of boarding, any description fixed in any position with nails i.e. false ceiling and wall lining etc and similar position fixed with screws complete. |
| 19 | M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approX900mm centre to centre with Gl cleat and Steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. (Note : Work will be carried out in pathch repair/complete replacement of Gypsum board with all necessary metrails mentioned in this item). |
| 20 | Taking down chowkats or frames (any type) n.exc 1.5 sqm with shutters (without taking off shuttrs from the frames) & removing from site including making good to disturbed jambs complete all as specified and directed. |
| 21 | Taking down chowkat or frames (any type) exc 1.5 sqm & n. exc 4 Sqm with shutters (without taking off shutters from the frames & removing from site including making good to disturbed jambs complete all as specified and directed. |
| 22 | M&L for powder coating anodised Aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 23 | Supply and fixing powder coated Aluminium (minimum thickness of powder coating 50 micron) work in any colour for ventilators made of rectangular tube of Aluminium section frame with and including one sets suitable size of louvers, fixed on both vertical frame having 06-10 Blades for receiving 5mm thick frosted glass strips (Min wide 10 cm)/fixed type, Aluminium frame sections conforming to catalogue No. 14097 of \"JINDAL\" or of techno commercially equivalent complete all as specified and directed. Note: The unit rate quoted by contractor includes the cost of 4mm thick tinted glass & stainless Steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing and all other connected accessories. |
| 24 | S&F powder coated Aluminium (minimum thickness of powder coating 50 micron) work in any colour for single/double leaf swing type Aluminium door (openable one/both sides) fixed with any type door frame work including appropriate heavy duty fixing materials such as 01Xtop & bottom pivot, 01Xfloor springs, mortise door handle lock vertical type size 100mm of Brass body 4 lever etc and one set of 15-16mm dia SS brush finish pull & push handles (approX200mm length) \"C\" shape of approved make & design on both sides of approved make Godrej/Everite/Ozone/Hardwyn/Dorma or techno commercially equivalent with and including 5.5mm thick clear glass & providing with pasting one side forasted computerised films on glass as per design provides during sample approval of door with clips Aluminium, beads, filling gaps at junctions at top, bottom & sides with required EPDM rubber/neoprene gasket etc complete all as specified and directed. Note : The rate to include all materials, labour, transport, taxess, delivered and placed in position at site of work. Each door shall be treated individually with complete set of accessories to be provided on each door, complete all as specified and directed. Before creation of door, the sample of all materials/accessories/hardware confroming to make of \"JINDAL\" catalogue No. Both vertical shutter :19501, shutter top rail : 19503, shutter Middle rail : 20060, shutter bottom rail : 19511, glazing clips : 19352 or techno commercially equivalent make will be submitted to Engr-in-Charge for weighing of powder coated door section and approval of materials/accessories/hardware. |
| 25 | Resecuring or easing & adjusting of Aluminium door/wooden door shutter (area of door shutter not exc 2.00 Sqm) with or without taking down shutter from existing frame for petty repairs like adjusting hinges, handle during execution of civil works and making the shutter fully functional complete all as specified and directed.Note : Taking down door shutters will be kept at site store carefully by the Contractor on its own arrangement till completion to civil works and refixing in same opening will be as per direction of Engr-in-Charge. If any damage noted by the Engr-in-Charge the contractor will be directed to rectify/repair the damage part/area of shutter at own cost. |
| 26 | S&F solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour, PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 27 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC sheet used instead of plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 28 | S&F 100mm butt hinges, extruded Aluminium alloy with stainless mild Steel hinge pin, anodised and fixed (Type B-21) complete all as specified and directed. |
| 29 | S&F stainless Steel anodised barrel tower bolts of extruded section 125mm long complete all as specified and directed. |
| 30 | S&F stainless Steel alloy sliding door bolts with has, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250mm complete all as specified and directed. |
| 31 | S&F stainless Steel anodised handles, fabricated type of size 150mm complete all as specified and directed. |
| 32 | S&F in repairs Aluminium (die cast) body door closer hydraluically regulated designation no 2 universal type suitable for door shutter of 701 to 850mm in width and weight between 36 to 40 kg and fixed complete all as specified and directed. |
| 33 | Supply and fixing powder coated Aluminium (minimum thickness of powder coating 50 micron) work in (any colour) for sliding window three track made of extruded profiles. Window profile with hollow section with multi chamber. Window having three shutters consisting to 02Xsliding sash to recive glass, 01Xsliding sash to receive wire mesh, sliding interlock (one vertical length in each shutter), glazing bead will be mitred cut at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of window section/hardware by using modern technique with and including EPDM gasket, Steel roller system, touch lock of Zinc alloyed of same colour of window powder coated and other required materials/accessories will be provided for creation to window and frame will be fixed to the any type wall by using fasteners/screws of required dia and size complete all as specified and directed.Note: The unit rate quoted by contractor includes the cost of 4mm thick tinted glass & stainless Steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing and all other connected accessories. Before creation of window, the sample of all materials/accessories/hardware confroming to make of \"JINDAL\" catalogue No, bottom frame 20620, top frame & vertical 20621, shutter top & bottom 20844, handle (side) 20606, shutter inter lock 20724, & glazing clip 19352 or techno commercially equivalent make will be submitted to Engr-in-Charge for weighing of powder coated window section and approval of materials/accessories/hardware. |
| 34 | S&F 12mm thick single/double shutter toughened glass door at entrances, etc. (each door shutter counted individually, area of shutter as per site requirement) as demarcated, swing type door openable both sides made out of 12mm thick extra ultra clear toughened float glass, edge polishing, fixed on Granite frame work/any type door frame work with appropriate heavy duty fixing materials such as 01Xtop pivot, 01Xtop patch, 01Xfloor springs, 01Xbottom patch, 01Xpach lock with keys etc and one set of 25mm dia SS brush finish pull handles (approX300mm length) \"C\" shaped of approved make & design on both sides of approved make Godrej/Everite/Ozone/Hardwyn/Dorma or techno commercially equivalent with and including providing \"PUSH\" & \"PULL\" stickers labels of approved design & make. Note: The rate include all materials, labour, transport, taxes, delivered and placed in position at site of work. Each door shall be treated individually with complete set of accessories to be provided on each door complete all as specified and directed. |
| 35 | S&F powder coated Aluminium partition (minimum thickness of powder coating 50 micron) work in any colour with and including using 12mm thick prelaminated particle board of choice colour in bottom panel and 5.5mm thick frosted/design/clear/tinted glass in top panel fixed with clips Aluminium, beads, filling gaps at junctions at top, bottom & sides with required EPDM rubber/neoprene gasket etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal member shall n.exc 1.10 mtr using following Aluminium powder coated section as specified in Jindal Catalogue (a) SP – 20048, (b) DP-20047 (c) glazing clips-19352 or techno commercially equivalent complete all as specified and directed. |
| 36 | S&F in repairs harrison rails (curtain rod/drapery rod), 20mm dia, stainless Steel with and including fancy type stainless bracket/wall to wall 02 Nos of each opening and stainless Steel side stopper fancy type of required shape and size 2 Nos of each opening complete all as specified and directed. |
| 37 | Dismantling wrought Iron or mild stteel work of any description not other wise provided complete all as specified and directed. |
| 38 | M&L for framed work as in grill, gratings, guard bars framed work for misc works including welding etc and other simiar work conforming to Fe-290 gde E-165 complete all as specified and directed. |
| 39 | Dismanting boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and directed. |
| 40 | S&F 18mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed. |
| 41 | M&L for plain fillets, square rectangular or triangular in section exc 3 & n.ec 6 sqcm but bull nosed, splayed, chamfered or rounded on one edge or face as in 2nd class hardwood wrought and fixed with screws complete all as specified and directed. |
| 42 | S&F soft close hinges for cabinet and cupboard (any crank as per site requirement) of Make Godrej or techno commercially equivalent complete all as specified and directed. |
| 43 | S&F stainless Steel anodised handles, fabricated type of size 100mm complete all as specified and directed. |
| 44 | S&F magnetic catcher for cabinets complete all as specified and directed. |
| 45 | S&F premium heavy duty suitable size stainless Steel lock any type as required cupboard/cabinet lock of make Godrej/Link or techno commercially equivalent complete all as specified and directed |
| 46 | M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 47 | M&L for preparing old painted wooden surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 48 | M&L for preparation of new Steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 49 | M&L for preparation of old Steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 50 | Demolition to brick work or stone/boulder masonry built in cement mortar in order to part demolition incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast PCC block, complete all as specified and directed. |
| 51 | M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in old size bricks CM 1:4 complete all as specified and directed. |
| 52 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks complete all as specified and directed. |
| 53 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM 1:4 complete all as specified and directed. |
| 54 | Taking down cement plaster of any thickness on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc in cement mortor of any description complete all as specified and directed. |
| 55 | M&L for rendering 15mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces at any height of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 56 | M&L for provided chicken mesh wire netting 25 gauge on block masonry or concrete surface fixed with 5mm dia nail with wisher etc complete all as specified and directed. |
| 57 | M&L for preparing surfaces newly plastered or unplastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/Land UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. |
| 58 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/L and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces with and including complete removal of existing treatment of any layer of wall and prepariing complete all as specified and directed. |
| 59 | M&L for 15mm thick plastering in CM 1:6 on concrete on fair faces of bricks or concrete surfaces of wall finished even smooth with thin layer of sagol finish on plastered surface etc complete all as specified and directed. |
| 60 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make with and including 2mm thick wall care putty, colour as approved by GE complete all as specified and directed. |
| 61 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make, colour as approved by GE with and including complete removal of existing treatment of any layer of wall and 2mm thick wall care putty complete all as specified and directed. |
| 62 | M&L for 5mm thick plastering in CM 1:3 on concrete on fair faces of bricks or concrete surfaces or ceiling finished even smooth with thin layer of sagol finish complete all as specified and directed. |
| 63 | M&L for preparation of new plastered surface and applying three coats of white washing on ceiling complete all as specified and directed. |
| 64 | M&L for preparation of old plastered surface and applying three coats of white washing on ceiling with and including complete removal of existing treatment of any layer complete all as specified and directed. |
| 65 | M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in bed blocks, steps etc including form work complete all as specified and directed. |
| 66 | Disconnecting existing water storage tanks of any capacity exc. 500 ltrs and n exc 1000 ltrs setting aside, and removing to store complete all as specified and directed. |
| 67 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 ltrs capacity complete all as specified and directed. |
| 68 | S&F in repairs 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for Iron pipe or Brass ferrule and fixed complete all as specified and directed. |
| 69 | S&F 20mm dia tank nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm-45gms/25mm-65gms) complete all as specified and directed. |
| 70 | Taking up or down 15-20mm bore Steel/composite/UPVC tubing and connection from any position concealed/exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 71 | Refixing 15mm dia bore old Steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 72 | All as per srl item no 71 above but 20mm dia bore. |
| 73 | Supplying and laying of CPVC pipes (outer dia of pipe 20mm) SDR 11 with and including Brass & plain CPVC SDR 11 fittings such as elbow, socket, tee, FTA/MTA & etc MS clamps/clips and necessary screwing as required tod fixed with or without concealed to walls with and including making good to required surfaces as per site requirement on walls/ceiling or laying in floors complete all as specified and directed. |
| 74 | S&F in repairs CPVC ball valve for 20mm outer dia of pipe complete all as specified and directed. |
| 75 | S&F in repairs gun metal globe or gate valves with Iron wheel head, screwed boh ends for Iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked complete all as specified and directed. |
| 76 | Cutting chases, pinning in making good to facings where required and pointing in CM 1:4 for consealed water tubing in brick work etc complete all as specified and directed. |
| 77 | S&F in repairs vitreous china wash down water closet pan of netural/warm/bright colour, (S trap Cat No. C0297, size 525X380X400mm)/(P trap Cat No. C0278, size 530X380X400mm) with and including standard regular seat cover Cat No. E8071 of Make Parryware or techno commercially equivalent with fixing on floor surface with appropriate materials and fitting to inlet, outlet pipe connections etc. complete all as specified and directed. |
| 78 | S&F in repairs 10 Itrs PVC (colour netural/warm/bright) valve less syphonic action type, single flushing cistern low level with inlet ball valve float including necessary fittings with wall complete all as specified and directed. Make-Parryware Cat part No. E8090 or techno commercially equivalent. |
| 79 | S&F in repairs oval shape (netural colour) vitreous China below counter basin of size 510X415X190mm, Cat No C0419 including 32mm full thread CP waste coupling, Cat No T9911A1 and bolltle traps/connection hose (Polymer P trap), Cat part No. C830899 and CP pillar cock Swan neck, Cat part No. G4803A1 of Parryware make or techno commercially equivalent complete all as specified and directed. |
| 80 | S&F in repairs Belmonte chemical resistant ceramic laboratory lab sink 24x18x8 inch perfect for research center & hospital use, colour-White, glossy finish below counter with and including suitable size of 32mm full thread CP waste coupling and bolltle traps/connection hose (Polymer P trap), and CP pillar cock Swan neck, Cat part No. G4803A1 of Parryware make or techno commercially equivalent complete all as specified and directed. |
| 81 | S&F in repairs vitreous China urinal (combo set) colour neutral of size 380X405X590mm, Cat part No. C0583 with and including 32mm full thread CP waste coupling, Cat No T9911A1, bolltle traps/connection hose (Polymer P trap), Cat part No. C830899, CP half turn angle valves of Cat part No. T9926A1 Star of Parryware make or techno commercially equivalent and suitable size of CP urinal flexible connection pipe includes 02 Nuts for secure connection complete all as specified and directed. |
| 82 | S&F in repairs single bowl sink made of stainless Steel 1mm thick kitchen or laboratory of size (24X18X9 inch) Cat part No. C854899 folded edge-gloss finish with plugs, washers and wastes; including mounted & bedding in cement mortar on grinte platform with and including 32mm full thread CP waste coupling, Cat No T9911A1, bolltle traps/connection hose (Polymer P trap), Cat part No. C830899, CP sink cock with Swinging Spout of Cat part No. G2321A1 Star of Parryware make or techno commercially equivalent complete all as specified and directed. |
| 83 | S&F in repairs 15mm dia bib cock of cast Copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for Iron/CPVC pipe or for Iron or for Brass ferrule, Cat No. G4004A1 of make Parryware or techno commercially equivalent complete all as specified and directed. |
| 84 | S&F in repairs 15mm two way bib cock cock of cast Copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for Iron/CPVC pipe or for Iron or for Brass ferrule, Cat No. G4067A1 of make Parryware or techno commercially equivalent complete all as specified and directed. |
| 85 | S&F in repairs 15mm angle valve of cast Copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for Iron/CPVC pipe or for Iron or for Brass ferrule, Cat No. G4053A1 of make Parryware or techno commercially equivalent complete all as specified and directed. |
| 86 | S&F in repairs health faucet with hose & hook conforming to CAT No. E8352A1 of make \"Parryware\" or techno commercially equivalent complete all as specified and directed. |
| 87 | S&F in repairs chromium plated toilet paper holder with cover, Cat No T6414A1 of make Parryware or techno commercially equivalent complete all as specified and directed. |
| 88 | S &F in repairs, Brass CP soap dish conforming to CAT No. T6403A1 Parryware or techno commercially equivalent make specified here-in-after complete all as specified and directed. |
| 89 | S&F as in repairs CP towel rail conforming to CAT No. T6501A1 of \"Parryware\" or of techno commercially equivalent make specified here in after complete all as specified and directed. |
| 90 | S&F in repairs CP Towel Ring conforming to CAT No. T6002A1 of \"Parryware\" or of techno commercially equivalent make specified here in after complete all as specified and directed. |
| 91 | S&F in repairs PVC connection 60cm long 15mm dia, with 2 Nos CP Brass check nuts complete all as specified and directed. |
| 92 | S&F in repairs looking mirror 5.50mm thick selected quality glass of approved size bevelled edge mounted on 6mm thick AC building board with Teak wood frame of approved colour complete all as specified and directed. |
| 93 | M&L for in repair PVC (SWR floor trap with Steel grating 75mm dia including jointing to waste pipe including removing old traps complete all as specified and directed. |
| 94 | Dismantling of soil waste and vent pipes of AC/PVC jointed in cement mortar/lead joints and taking out from position of 75/100mm dia including connected fittings complete all as specified and directed. |
| 95 | S&F 40mm bore pipe low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2 laid on wall and trenches complete all as specified and directed. |
| 96 | M&L for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed. |
| 97 | M&L for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed. |
| 98 | S&F PVC (SWR) bends/shoe plain 110mm bore complete all as specified and directed. |
| 99 | S&F PVC (SWR) bends/shoe plain 75mm bore complete all as specified and directed. |
| 100 | S&F PVC (SWR) branch piece single (single Y) equal or unequal 110mm dia with door access complete all as specified and directed. |
| 101 | S&F PVC (SWR) branch piece single (single Y) equal or unequal 75mm dia with door access complete all as specified and directed. |
| 102 | S&F 75mm dia SWR junction (single \"T\") equal or unequal with door access complete all as specified and directed. |
| 103 | S&F 110mm dia SWR junction (single \"T\") equal or unequal with except door access complete all as specified and directed. |
| 104 | M&L for PVC (SWR) vent cowl for 75mm bore complete all as specified and directed. |
| 105 | M&L for PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 106 | M&L for providing core cut on the slabs/wall upto depth 300mm by using standard core cutter machine for inlet & outlet pipe of dia upto 110/75mm including tapering of all edges, making round shoulders of edge including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete all as specified and directed. |
| 107 | M&L for bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy for large gates; hook and pintle hinges: large hasp and staples, chains, hand made sliding bolt clamps, hold fast; wall ties: hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafter knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe.290, Gde-E-165 complete all as specified and directed. |
| 108 | Demolition of cement concrete in ground floor and paving not exc. 15mm thick (below or above ground level) complete all as specified and directed. |
| 109 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded aggregate) as in sub base/flooring complete all as specified and directed. |
| 110 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 111 | M&L for factory made chamfered edge cement concrete chequered tiles of size 300X300mmX20mm thick conforming to IS-1237 (2006) with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 112 | M&L for 75 thick PCC (1:3:6) type C2 for plinth protection by using 20mm graded crushed stone aggregate finished fair and even laid to a slope of 1:20 with and including 12mm wide and 50mm deep joint shall be provided at a distance not exceeding 3 Mtr and at corners. The joints shall be filled with mastic filling of bitumen 85x25 and the sand in the ratio 1:2 complete all as specified and directed. |
| 113 | S&F in repair stainless Steel (SS) letter (powder coating 50 micron of any approved colour) fixed on Granite/ACP cladding or Steel sheet with ornamental and intricate design in English and Hindi complete all as specified and directed. (Size of letter : height not less than 200mm and upto 300mm) |
| 114 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde E-250 Quality-A with and including including power drilling, cleaning of holes by air pressure then fastner/nut & bolts should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete all as specified and directed. |
| 115 | Dismantling plain or corrugated Steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, any description and in any position on slope roof complete all as specified and directed. |
| 116 | S&F Prepainted galvalume Aluminium Zinc coating GI based corrugated Steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 117 | S&F 1mm thick plain, galvanised, mild Steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 fixed with self tapping screws complete all as specified and directed. |
| 118 | Complete removal of existing old APP membrane/bituminous tarfelt (water proofing treatment)/any type of existing treatment of any thickness i.e PCC padding and screed bed carefully by low impact high frequency hammer or any other suitable method without damaging the existing RCC surface of the slab with and including cleaning/removing of old existing primer any type by using remover adhesive/liquid and preparation to surfaces of roof slab, walls, chajjas etc. (old or new) with wire brush drying and cleaning to remove all foreign materials and washing preferably with high jet pressure pump or mechanical with water to remove loose particles complete all as specified and directed. |
| 119 | M&L for providing 40mm average thick PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope with and including providing and laying protective screed of average 15-20mm thick in CM 1:4 proportion with integral waterproofing compound Conplast WLXtra @ 200 ml/bag of cement and finish the wall plaster upto 300mm above FFL as per the manufacturers specification to be laid over the RCC roof slab, walls, chajjas etc. when surface is green, finishing the surfaces even and fair without using extra cement complete all as specified and directed. Note : Crack treatments on the RCC roof surface and new PCC padding/plaster surface: Treatments of cracks, honeycombings carry out cementitious injection grouting at leakage points using cement slurry mixed with CebeX100-Plasticised expandive grout admixture supplied in 225 gm packet per bag of cement. Cost of allM&L for thereof shall deemed included in quoted rates. |
| 120 | M&L for applying a uniform coat of approved primer at 0.70 kg/sqm using for water proofing treatment over cement plaster and laying minimum 3mm thick and weighing not less than 3.6 kg/sqm Atactic polypropylene Polymer (APP) modified bitumen-based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions on surfaces of roof slab, walls, chajjas etc. with and including preparation and applying two coats of bitumastic-Aluminium paint over the APP membrane complete all as specified and directed. |
| 121 | S&F in repairs 5mm thick PVDF coating Aluminium composite for wall cladding/ceiling on facia, column and other decorative faces in required shape and size such as rounding in circular/semi cicular, square/rectangular/flat including apropriate Aluminium section frame work and gap filling materials by using high-performance weatherproof silicone as per manufacturer\"s instructions and as approved by Engr-in-Charge at any description and in any position with and including scafolding/shuttering any type required to execute the work complete all as specified and directed. |
| 122 | Taking down old unserviceable/deteriorated batten/PVC conduit point wiring Aluminium/Copper from existing place i.e. light, fan, socket or power points complete with any type of unserviceable fittings such as switches, sockets, bell push, ceiling rose, pendants, holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar or plaster of Paris and to match/finish new surface as the existing surface either by using same colour distemper, putti or white/colour wash complete all as specified and directed. |
| 123 | M&L for point wiring for one light/exhaust fan/ceiling fan & one bell/buzzer point controlled by one switch.with necessary fixing arrangements with PVC FRLSH insulated and unsheathed Copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia/PVC casing & caping not less then (20x12) mm including all accessorieS&Fittings such as junction boxes, bends, tee, elbow etc alongwith required size modular boxes including modular frame/cover plate suitable for mounting switches/sockets etc including PVC-FRLSH insulated and unsheathed Copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar and for matching/finishing of new surfaces either by means of plaster of Paris/putti or distemper/colour wash with same existing colour surfaces complete all as specified and directed. |
| 124 | All as per srl item no 123 above but for one switch socket outlet point 3 pin 5 Amps on independent board. |
| 125 | All as per srl item no 123 above but for one 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/side the switch board of light point in same vertical/horizontal plane. |
| 126 | All as per srl item no 123 above but for one 3 pin 6/5 Amp socket outlet same board. |
| 127 | All as per srl item no 123 above but for point wiring complete with 2 run of 2.5 sqmm single core PVC FRLSH insulated heavy duty ISI marked, unsheathed cable 1100 volts grade with multistranded Copper conductor along with one run of 2.5 sqmm single core PVC FRLSH insulated heavy duty for Earth continuity conductor and connected to common Earth dolly complete all as specified and directed. |
| 128 | Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified and directed. |
| 129 | Taking down Earth plug/DBs of any make and type including MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and directed. |
| 130 | Taking down fan/ex fan/wall fan any sweep any type and size, keeping with safe custody and refixing the same with replacement of 3 core PVC insulated PVC sheated 3 core multistranded Copper conductor cable of appropriate size as specified/directed, from ceiling rose to fan terminal, S&F capacitor of suitable capacity, ceiling fan suspension rubber hook insulator complete with its clips, nut, bolt, washers and quarter pin, over hauling the fan, painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 131 | M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed Copper conductor cable 2.5 sqmm drawing in and including PVC casing/casing of suitable size on wall/surface on ceiling with one additional PVC wire of Copper conductor of 2.5 sqmm for Earth continuity conductor complete all as specified and directed. |
| 132 | M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed Copper conductor cable 6 sqmm drawing in and PVC casing/caping of suitable size on wall/surface on ceiling with one additional PVC wire of Copper conductor of 6 sqmm for Earth continuity conductor complete all as specified and directed. |
| 133 | M&L for sub main wiring with two single core PVC insulated unsheathed Copper conductor cable 4 sqmm drawing in and including suitable size PVC -FRLS casing and caping wall/surface on ceiling with one additional PVC wire of Copper conductor of 4 sqmm for Earth continuity conductor complete all as specified and directed. |
| 134 | M&L for sub main wiring complete with 4 single core 10.0 sqmm, 1100 volts grade, PVC insulated, stranded Copper conductor FRLSH cable along with continuous Copper Earth conductor of 10.0 sqmm in and including rigid non metallic PVC conduit medium grade ISI marked not less than 25 mm dia/PVC casing & caping not less then (25x12) mm including all accessorieS&Fittings such as junction boxes, bends, tee, elbow etc complete all as specified and directed.Note:- (i) 5 runs of 10.0 Sqmm conductor and one run of PVC conduit alongwith PVC fittings any type shall be measured as one unit length. |
| 135 | S&F in replacement of LED 18/20 Watt light fitting batten integrated LED channel, integral sleek extruded polycarbonate LED channel with white acrylic cover and including connecting up with twin core twisted flexible Copper conductor cable with suitable size with all accessories complete all as specified and directed. |
| 136 | S&F in replacement of LED luminaire 600 mmx600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface/ceiling (as per site requiremt) including connecting up with driver three core flexible Copper conductor cases of suitable size complete all as specified and directed. |
| 137 | S&F in replacement of round recessed mounted with in-built driver, power factor > .9 operating voltage 230 V, surface mounting in round shape 12/15 W LED downlighter of white/neutral white/warm white color temperature, of size as per site requirement etc. along with 3 core prewired and all accessories complete all as specified and directed. |
| 138 | S&F in replacement of round recessed mounted with in-built driver, power factor > .9 operating voltage 230 V, surface mounting in round shape 12/15 W LED downlighter of white/neutral white/warm white color temperature, of size as per site requirement etc. along with 3 core prewired and all accessories complete all as specified and directed. |
| 139 | S&F in replacement of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 4/6 feet long complete all as specified and directed. |
| 140 | S&F in replacement of building security LED fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size/bore GI pipe bracked duly cut to size and bent to shape, duly painted incl necessary clamps as required to fix on concrete/steel poles incl taking old unsve light & GI bracket any type and size complete all as specified and directed. |
| 141 | S&F call bell AC 230 V single pole along with necessary electric connection complete all as specified and directed. |
| 142 | S&F in replacement for modular bell push, single ole, one way, 6 amp susitable for 1 module complete all as specified and directed. |
| 143 | S&F in replacement ceiling rose ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 144 | S&F in replacement modular switch 6A SP one - way 230V white ivory finish complete all as specified and directed. |
| 145 | S&F in replacement modular switch 16A SP one - way 230V white ivory finish complete all as specified and directed. |
| 146 | S&F in replacement modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 147 | S&F in replacement modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 148 | S&F in replacement modular type stepped electronic fan regulator complete all as specified and directed. |
| 149 | S&F in replacement of SPN distribution box, double door of protection grade IP 43 in fine powder coated, matt finish, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 8 way, incl taking down old unsv SPN DB any type and size complete all as specified and directed. |
| 150 | S&F in replacement of SPN distribution box, double door in fine powder coated, matt finish, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 06 way, incl taking down old unsv SPN DB any type and size complete all as specified and directed. |
| 151 | S&F in replacement of SPN distribution box, double door in fine powder coated, matt finish, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 12 way, incl taking down old unsv SPN DB any type and size complete all as specified and directed. |
| 152 | S&F in replacement of SPN distribution box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar of 04 way, incl taking down old unsv SPN DB any type and size complete all as specified and directed. |
| 153 | S&F in replacement of TPN DB 4 Way distribution box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type Copper bus bar, Din rail, Earth bar complete incl taking down old unsv TPN DB any type and size complete all as specified and directed. |
| 154 | S&F in replacement of single pole and neutral enclosure with a two pin and Earth plug and socket complete with one single pole MCB 20 Amp, single pole complete all as specified and directed. |
| 155 | S&F in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC, 10 KA breaking capacity \"C\" Series, \"ISI marked complete all as specified and directed. |
| 156 | S&F in replacement of MCB SP, 06 to 63 Amps 240 volts, AC, 10 KA breaking capacity \"C\" Series, \"ISI marked complete all as specified and directed. |
| 157 | S&F in replacement of MCB TPN 63 Amps 440 volts, AC, 10 KA breaking capacity \"C\" Series, \"ISI marked complete all as specified and directed. |
| 158 | M&L in replacement for earthing with galvanized steel Earth plate electrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI Earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal/coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mmx300 mmx300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electrical plateNo. 3 of SSR Part-I and testing of Earth resistance complete all as specified and directed. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately). |
| 159 | M&L for taking down of split type AC any type and Capacity duly storing of its refrigerant, disconnecting its both the Copper tubes from indoor and out door unit carefully, taking its inner and outer unit and refixing the same in other side of wall/location directed by EIC, duly filling of make up refrigerant as per desired pressure, minor brazing/welding in Copper tubing, making all elect connections as before and testing complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
