|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/loose soil for laying/taking out GI pipe line all as specified and directed. |
| 2 | Returning, filling in including spreading,leveling, watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil all as specified and directed. |
| 3 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed. |
| 4 | Taking out old unserviceable GI tubing with all fittings from trenches, walls, floors etc of following sizes all as directed :- |
| 5 | a) 100 mm bore |
| 6 | b) 80 mm bore |
| 7 | c) 50 mm bore |
| 8 | d) 40 mm bore |
| 9 | e) 25 mm boreNote : Excavation & earth work will be measured & paid separately under respective item of BoQ\". |
| 10 | Supply and fix GI tubing medium grade galvanised with all fittings and laid in walls, roof, ceiling or laid in floors etc all as specified and directed for the following sizes:- |
| 11 | a) 50 mm bore |
| 12 | b) 40 mm bore |
| 13 | c) 25 mm bore |
| 14 | Supply and fix GI tubing medium grade galvanised with all fittings and laid in trenches all as specified and directed for the following sizes :- |
| 15 | a) 100 mm bore |
| 16 | b) 80 mm dia bore |
| 17 | c) 50 mm bore |
| 18 | d) 40 mm bore |
| 19 | e) 25 mm bore(Note : Excavation & earth work will be measured & paid separately under respective item of BoQ\"). |
| 20 | Taking out old unserviceable PVC/UPVC/CPVC pipe with all fittings from ceiling/walls/floors etc of following sizes all as directed :- |
| 21 | (a) 50 mm bore |
| 22 | (b) 40 mm bore |
| 23 | (c) 25 mm bore |
| 24 | Supply and laying of UPVC pipe SDR 11 & Plain UPVC SDR 11 fittings on walls/ceiling or laying in floors/trench complete all asspecified for the following sizes :- |
| 25 | (a) 50 mm bore |
| 26 | (b) 40 mm bore |
| 27 | (c) 25 mm bore |
| 28 | Supply and fix in repairs gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipe of the following sizes all as specified and directed:- |
| 29 | (a) 50 mm bore |
| 30 | (b) 40 mm bore |
| 31 | (c) 25 mm bore |
| 32 | Supply and fix 25 mm dia magnetic float valve diaphragm attached with plunger and magnetic coupling complete all as specified and directed |
| 33 | Disconnecting over head PVC service tank connections of any capacity such as inlet pipe/outlet/overflow pipe connections of any size 25 to 50 mm, repairs to leakage of tank through inlet/outlet connections by cutting the over size hole and material and labour for GI pipe fittings such as GI nipple, unions, sockets, reducers, check nuts etc. of size 25 to 50 mm including rubber/fiber packing reconnecting, positioned the tank in its positions all as directed by Engr-in-Charge. |
| 34 | Material and labour for repair to fire hydrant valves of size 63/80/100 mm dia and shifting at civil workshop by transport, opening up the defective valves and taking out spindle and gate from sluice valve and removing the old threads by grinding and making a new threads by brass welding, turning & polishing to the spindle at civil workshop on grinding machine as per original threads and refixing the same at position and testing complete all as specified and directed by Engr-in-Charge. |
| 35 | Taking out old unserviceable HDPE pipe with all fittings from trenches or above ground level of following sizes all as directed :- |
| 36 | a)100/110 mm dia bore |
| 37 | b)150 mm dia bore |
| 38 | c) 200 mm bore(Note : Excavation & earth work will be measured & paid separately under respective item of BoQ\"). |
| 39 | Supply, laying, fixing and testing HDPE pipes PN-10 including jointing materials in trenches complete all as specified and directed for the following sizes :- |
| 40 | a) 100/110 mm bore |
| 41 | b) 150 mm bore |
| 42 | c) 200 mm bore |
| 43 | Taking out old unserviceable DI/CI pipe with all fittings from trenches or above ground level of following sizes all as directed :- |
| 44 | a)100 mm dia bore |
| 45 | b)150 mm dia bore |
| 46 | c)200 mm dia bore |
| 47 | d) 250 mm dia bore. |
| 48 | e) 300 mm dia bore. |
| 49 | f)400 mm dia bore. |
| 50 | Laying only DI/CI pipe new or old position obtained from item No 15 including cleaning of following sizes :- |
| 51 | a)100 mm dia bore |
| 52 | b)150 mm dia bore. |
| 53 | c)200 mm dia bore. |
| 54 | d) 250 mm dia bore. |
| 55 | e) 300 mm dia bore. |
| 56 | Supply, laying and testing ductile iron tubing class K-7 with all fittings in trenches all as specified and directed for the following sizes |
| 57 | a)100 mm dia bore |
| 58 | b) 150 mm dia bore. |
| 59 | c) 200 mm dia bore. |
| 60 | d) 250 mm dia bore. |
| 61 | e) 300 mm dia bore. |
| 62 | f)400 mm dia bore. |
| 63 | Material and labour for bends any type (radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces single branch, \"Y\" junction, double branch, cross, collars, caps and plugs all ends flanged/sockets or socket and spigot up to 300 mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 64 | Material and labour for rubber gasket joints with all jointing materials complete all as specified and directed for the following sizes:- |
| 65 | (a)80 mm bore. |
| 66 | (b) 100 mm bore. |
| 67 | (c) 150 mm bore. |
| 68 | (d) 200 mm dia bore. |
| 69 | (e) 250 mm dia bore. |
| 70 | (f)300 mm dia bore. |
| 71 | Material and labour for lead wool joints with all jointing materials like lead wool & spun yarn complete all as specified and directed for the following sizes:- |
| 72 | (a)80 mm bore. |
| 73 | (b) 100 mm bore. |
| 74 | (c) 150 mm bore. |
| 75 | (d) 200 mm dia bore. |
| 76 | (e) 250 mm dia bore. |
| 77 | (f)300 mm dia bore. |
| 78 | Labour only for breaking reinforced cement concrete chajja or canopy or similar items like cement water storage tank etc not exceeding 12 cm thickness for removing rusted GI pipe of any size and making good etc complete all as specified and directed. |
| 79 | Supply and fix in repairs mild steel nuts & bolts, washer flange etc all as specified and directed. |
| 80 | Supply & toping for lubricating oil of grade 220 all specified and directed. |
| 81 | Supply & filling coolant all specified and directed. |
| 82 | Material and labour for preparation of existing painted surfaces of fire hydrantat any area includingfilling of cavities etc and applying one coat of synthetic enamel paint using spray gun/machine as per colour code including writing hydrant No on fire hydrant etc complete all as specified and directed. |
| 83 | Supply and fixing in repair canvas hose of length of 15 Mtr with SS Male and female coupling of size 63/80/100mm dia with GI Binding complete all as specified and directed by Engr-in-Charge. |
| 84 | Supply and fix in repairs gland packing for pump of size 3 HP to 150 HP as per site requirement complete all as specified and directed. |
| 85 | Dismantlingand taking out carefully defective spindle from sluice valve of size 80 mm dia and removing the old gatestud by grinding and making it to a shape by brass welding and turning & polishing, greasing, servicing as per original gate stud and refixing the same at position and testing complete. |
| 86 | (a)All as per Item No 28 here-in-before but of size 100 mm dia. |
| 87 | (b)All as per Item No 28 here-in-before but of size 150 mm dia. |
| 88 | (c)All as per item No 28 here-in-before but size 200 mm dia |
| 89 | (d)All as per item No 28 here-in-before but size 250 mm dia |
| 90 | (e)All as per item No 28 here-in-before but size 300 mm dia |
| 91 | Supply and fix in repairs contactor 100 Amps, 3 Pole suitable 75 HP Motor for switching electrical power circuit as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 92 | Supply and fix in repairs cast iron sluice valve of size 80 mm flanged PN-1.6ISI conforming to IS :14846 hand wheel operated, stainless steel stem with gun metal parts flanged driller to IS: 1538 non rising stem PN-1.6 completed all as specified and directed by Engr in charge. |
| 93 | (a)All as per Item No 30 here-in-before but of size 100 mm dia. |
| 94 | (b)All as per Item No 30 here-in-before but of size 150 mm dia. |
| 95 | (c)All as per Item No 30 here-in-before but of size 200 mm dia. |
| 96 | (d)All as per Item No 30 here-in-before but of size 250 mm dia. |
| 97 | Supply and fix in repairs Gear box type cast iron sluice valve of size 300 mm with lugs, gear operated, stainless steel grade 304 disc flanged PN-1.6ISI conforming to IS :14846 hand wheel operated, stainless steel stem with gun metal parts flanged driller to IS: 1538 non rising stem PN-1.6 completed all as specified and directed by Engr in charge. |
| 98 | Supply and fix in repairs water pressure gauge dial type of range 0-12 Kg/Sqcm all as specified and directed. |
| 99 | Supply and fix in repairs water pressure gauge dial type of range 0-16 Kg/Sqcm all as specified and directed. |
| 100 | Supply and fix in repairs HRC fuse links 250 Amps, DIN type, 80 KA, 500V, AC, 50 Hz, Size 1 complete all as specified and directed. |
| 101 | Supply and fix in repairs HRC fuse links 125 Amps, DIN type, 80 KA, 500V, AC, 50 Hz, Size 00 complete all as specified and directed. |
| 102 | Supply and fix in repairs HRC fuse links 100 Amps, DIN type, 80 KA, 500V, AC, 50 Hz, Size 00 complete all as specified and directed. |
| 103 | Supply and fix in repairs HRC fuse links 2 Amps to 16 Amps, 80 KA, 500V, AC, 50 Hz, FGN complete all as specified and directed. |
| 104 | Supply and fix in repairs Gear box type cast iron wafer type butter fly valve size 300 mm without lugs, gear operated, stainless steel grade 304 disc, Nitrile/EPDMrubber lining test pressure PN-10/PN16 all as specified and directed. |
| 105 | (a) All as per item No 38 here-in-before but size 250 |
| 106 | (b)All as per item No 38 here-in-before but size 200 mm dia |
| 107 | (c)All as per item No 38 here-in-before but size 150 mm dia |
| 108 | (d)All as per item No 39 here-in-before but size 100 mm dia |
| 109 | Material and labour dismantling old unserviceable 200 mm dia water meter CI body flanged and drilled both ends with strainer,supply and fixing newwater meter 200 mm dia CI body flanged and drilled both ends confirming to IS 2373/81 mechanical driven straight reading including 200 mm dia CI strainer and testing complete all as specified and directed by Engr-in-Charge. |
| 110 | Supply and fix in repairs Single Outlet Landing valve (Hydrant Valve) of size 63 mm dia of Straight/Right Angle/Turn Down type made out of gun metal, flanged type, conforming to IS : 5290 along with cast iron hand wheel operated, female instantaneous outlet, ABS Blank cap and chaincomplete all as specified and directed by Engr-in-Charge. |
| 111 | Supply and fix in repairs hand wheel made out of cast iron , suitable for sluice valve of size 80 to 150 mm complete all as specified and directed by Engr-in-Charge. |
| 112 | Supply and fix in repairs hand wheel made out of cast iron, suitable for sluice valve of size 200 to 300 mm complete all as specified and directed by Engr-in-Charge. |
| 113 | Supply and fix in repairs 3 - way Inlet Breeching, gun metal body having 3 gun metal, 63 mm male instantaneous inlets, fitted with non- return valves with gun metal drain valves, 3 rubber blank caps and chain complete all as specified and directed by Engr-in-Charge. |
| 114 | Supply and fix in repairs 2 - way Inlet Breeching, gun metal body having 2 gun metal, 63 mm male instantaneous inlets, fitted with non- return valves with gun metal drain valves, 2 rubber blank caps and chain complete all as specified and directed by Engr-in-Charge. |
| 115 | Supply and fix in repairs rubber seal, blank caps and chain for fire hydrant of any size complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fixing in repair PVC suction hose of size 50mm dia, with hose clamp complete all as specified and directed by Engr-in-Charge. |
| 117 | Supply and fixing in repair PVC suction hose of size 80mm dia, with hose clamp complete all as specified and directed by Engr-in-Charge. |
| 118 | Supply and fix in repairs cast iron Non return valve of size 100 mm flanged PN-1.6ISI conforming to IS : 5312 swing type with nitrile rubber flap flanged end to IS: 1538all as specified and directed by Engr in charge. |
| 119 | (a)All as per item No 48 here-in-before but size 150 mm dia |
| 120 | (b)All as per item No 48 here-in-before but size 200 mm dia |
| 121 | Taking down / dismantling alternatorfrom the engine with the help of crane for lifting on the vehicle of any make, 3 phase 415V of 250 KVA capacity, opening the alternator for rewinding using super enameled copper wire of suitable gauge to match with the existing winding including varnishing & drying and re-assemblingthe motor, connecting with diesel engine with proper alignment and testing complete through authorised service engineer all as specified and directed. |
| 122 | Supply and fix in replacementnewiron chain 30 meters with two numbers new pulley ongirder mounted type including welding / repairing / making smooth surface with sand paper of girder with greasing & designed carrying cap load 8 ton for motors completeall as specified and directed. |
| 123 | Supply & fixing in repair the strainerfilter of size of 0.18 CUM including replacement of strainerat GLR pump house completed all as specified and directed by Engr in charge. |
| 124 | Supply and fixing in repair float type level indicator , Range up to 9 Mtr completed all as specified and directed by Engr in charge. |
| 125 | Supply and fix in repairs of oil filter suitable for Diesel Engine 150 HP all as specified anddirected.Make : Kirloskar |
| 126 | Supply and fix in repairs of fuel filter suitable for Diesel Engine 15HP all as specified anddirected.Make : Kirloskar |
| 127 | Supply and fix in repairs following spare parts suitable for Diesel Engine 150 HPall as specified anddirected. Make : Kirloskar |
| 128 | (a) V-belt |
| 129 | (b) Hose clamp |
| 130 | Material and labour for preparation of existing painted surfaces offire hose boxes etc at any area includingfilling of cavities etc and applying one coat of synthetic enamel paint using spray gun/machine as per colour code including writing hydrant No on fire boxes etc complete all as specified and directed. |
| 131 | Material and labour for preparation of existing painted surfaces of motor, pump, water pipe lines etc at RDS pump house , clarifier pump house& Agra GLR pump houseand filling of cavities etc and applying one coat of synthetic enamel paint using spray gun/machine as per colour code including writing SM & MES No on pump & motor, indication marking etc complete all as specified and directed. |
| 132 | Supply and fix foot valve 50 mm dia with clamp complete all as specified and directed. |
| 133 | Supply and fix foot valve 100 mm dia with clamp complete all as specified and directed. |
| 134 | Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage up to 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.complete all as directed. |
| 135 | Supply and fix Cast Iron Air Release Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia complete all as specified and directed. |
| 136 | Supply and fix Cast Iron Air Release Valves with single air Outlets, conforming to IS 14845 of size 150 mm dia bore and fixing up in Cast Iron Water supply mains of size 150 mm dia complete all as specified and directed. |
| 137 | Supply and fix Cast Iron Air Release Valves with single air Outlets, conforming to IS 14845 of size 200 mm dia bore and fixing up in Cast Iron Water supply mains of size 200 mm dia complete all as specified and directed. |
| 138 | Supply and fix in replacement stainless steel centrifugal pump impeller suitable for 20 HP motor including clearance , lath work of existing shaft & fitment with suitable key complete all as specified and directed. |
| 139 | Supply and fix in replacement stainless steel centrifugal pump impeller suitable for 30 HP motor including clearance , lath work of existing shaft & fitment with suitable key complete all as specified and directed. |
| 140 | Supply and fix in replacement stainless steel centrifugal pump impeller suitable for 60 HP motor including clearance , lath work of existing shaft & fitment with suitable key complete all as specified and directed. |
| 141 | Supply and fix in replacement stainless steel centrifugal pump impeller suitable for 75 HP motor including necessary clearance , lath work of existing shaft & fitment with suitable key complete all as specified and directed. |
| 142 | Supply and fix in replacement stainless steel centrifugal pump impeller suitable for 156 HP motor including clearance , lath work of existing shaft & fitment with suitable key complete all as specified and directed. |
