|
| 1 | Supply and fixing aluminium frame work for work station partitions and shutter for doors, sliding windows & ventilators (moveable louvers type) with one or more rebates including joining cleat for fixing ctc rubber gasketing all round the panels/shutter to fix glass, PVC gasketing in all channels, locking arrangement,complete all as specified. Note: (a) Glass/ mesh/XPM to be measured and paid under respective item of work. (b) The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium frame work and wall. (c) The rates quoted shall be inclusive of neoprene beading, glazing clips, PVC gasketing, screws/screwing with ground for fixing of work station etc as required, complete all as specified and directed. |
| 2 | Supply and fixing in repair12 mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations andfixed with aluminium frame work or screws to timber frame work complete all as specified and directed |
| 3 | Supply and fixing for 18 mm thick high quality MDF coloured/Granite finished(surface finish with matte/glossy) prelaminatedboard, chipping free edges, exterior grade,prelaminated both side ,fixed with stainless steel screws toaluminium/wooden frame work for work station, where monitor and CPU of computer take place, making/provding round hole with adjustable cap for passing of wires from UPSwith lipping of edge etc, complete all as specified and directed. |
| 4 | Supply and fixing for 25 mm thick high quality MDF coloured/Granite finished(surface finish with matte/glossy) prelaminatedboard, chipping free edges, exterior grade,prelaminated both side ,fixed with stainless steel screws toaluminium/wooden frame work for work station, where monitor and CPU of computer take place, making/provding round hole with adjustable cap for passing of wires from UPSwith lipping of edge etc, complete all as specified and directed. |
| 5 | Supply and fixing 12mm thick toughened/frosted glass with etching, selected quality plain/tinted as approved by GE, glass, in squareexc 0.5 Sqm in each pane, fixed with aluminium beading in aluminium door,window & ventilation etc all as specified. |
| 6 | Supply and fixing 5.5mm thick selected quality plain/tinted as approved by GE, glass, in squareexc 0.5 Sqm in each pane, fixed with aluminium beading in aluminium door,window & ventilation etc all as specified. |
| 7 | Supply and fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed |
| 8 | Supply andfixing for aluminium alloy anodized (powder-coated) windowslidingtype, with aluminium sections as per of “HINDALCO” section numbersincluding aluminium alloy anodized snap type beads, handles and glazing clip, joint cleats, rubber gaskets etc., complete all as specified (a) Frame of section 63.5mmx38mmx2.00mm thick . (b) Two track 61.85x31.75 (WS-2569 of HINDALCO and equivalent). (c) Shutter top/bottom (WS-2494 of HINDALCO and equivalent). (d) Shutter interlock (SP-4698 of HINDALCO and equivalent). (e) Shutter handle (SP-4699 of HINDALCO and equivalent). (f)5mm thick tinted glass . manufacturers : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or any other equivalent approved by GE. |
| 9 | Supply and fixing aluminium (Diecast) body hydraulically door closer regulated,designation No.3, universal type,suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg ,complete all as specified and directed. |
| 10 | Supply and fixing Double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 11 | Supply and fixing for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed . Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 12 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed . Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 13 | Supply and fixing 5mm PVC thick hollow sheet (the thicknees of inner wall 0.7 to 1.00mm) panelling inclusive of solvent cement and fixing at site with U clip or PVC frame as per specifications and drawing complete all as specified and directed. |
| 14 | Supply and fixing 8 to 10mm Fluted PVC panelling inclusive of solvent cement and fixing at site with U clip or PVC frame as per specifications and drawing complete all as specified and directed. |
| 15 | Material and labour for taking down of any type of aluminium window/door shutter including frame of area exceeding 1.00 Sqm but not exceeding 2.5 Sqm and repairing by means of tightening with new screw ,cleats,& providing new glazing clips, new rubber gasket or neoprone beading etc; as reqd and refixing in the same openingto make it serviceable,complete all as specified and as directed. |
| 16 | Supply and fixingof Locks for drawer,grade I, size 65 mm for work Station drawer locking System etc all complete all as specified and directed |
| 17 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings , complete, all as specified and as directed. |
| 18 | Dismantling of RCC work as inRoofs,floors(otherthan ground floors), beams, staircases, landing,chajjas and similar suspendedwork etc all as specified and as directed.Note:-(Reinforcement cut to facilited dismantling) |
| 19 | Supply and fixing 14 to 16mm thick insulation puff sheet below rooof sheet at any height fixed with screw to MS Purlins/Wooden Purlins etc complete all as specified and directed. Note theinsulation puff sheet be fixed before installing/laying of galvalume sheet. Make Alsaka Puff Ind, Epack prefab, Goodwillfoams, or equvalent all as specified and as directed. |
| 20 | Supply and fixing pre–painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, having zinc coating 150 gm per sqm (Az–150) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 21 | Supply and fixing pre–painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having zinc coating 150 gm per sqm (Az–150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 22 | Material and labour for MS framed work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed |
| 23 | Dismantling of boarding/ceiling of any description and in any position of any size complete all as specified and as directed. |
| 24 | Supply and fixing of fixingGI OREO Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 25 | Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified. |
| 26 | Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed |
| 27 | Demolition of plain cement concrete (unreinforced) including any type of flooring any description not exc 15 cm thick, complete all as specified and directed by Engr-in- charge. (Note: All Demolished material / debries will be taken by the contractor out side of thecantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind.) |
| 28 | Material and labour for Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding15mm thick screed bed in cement mortar, (1:4),complete, all as specified and as directed. |
| 29 | Material and labourNon Skid coloured ceramic tiles premium/1st quality of same description as of floor tiles in serial item No 28 above as in skirting, set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4,complete, all as specified and as directed. |
| 30 | Material and labour for25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm gradedcrushed stone aggregate), finished even & fair without using extra cement ,complete, all as specified and as directed.Note- This item shall not be executed in the location, where dismantling of tiles only have been done. |
| 31 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete, all as specified and as directed. |
| 32 | Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size300mmx 600mmx7mmto 8 mmm thick, set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering onfaces of brick / concrete surfaces in cement mortar (1:4),complete all as specified and as directed |
| 33 | Material and labour Machine cut Kota stone slab flooring 18-20 mm thick, laid over & including 20 mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, granding and polishing (mirror finish) ,complete, all as specified and as directed. |
| 34 | Material and labour Machine cut Kota stone slab flooring 18-20 mm thick as in skirting, dado and pillar, laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) ,complete, all as specified and as directed. |
| 35 | Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles ,complete, all as specified and as directed. |
| 36 | Material and labour for brick work with sub class \"B\" old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6),complete, all as specified and as directed. |
| 37 | All as per serial item No. 36 here in befor but except bricks old serviceable bricks obtained from serial item No35 aboveincluding removing motar, cleaning the bricks with water,complete, all as specified and as directed. |
| 38 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cement mortar 1:4 straight or curved on plan to any radius,complete, all as specified and as directed. |
| 39 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. ,complete, all as specified and as directed. |
| 40 | Material and labour for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine stone aggregate of size between 6 to 12 mm as per the texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied,complete, all as specified and as directed. |
| 41 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar (1:4) and finishing the surface even and smooth without using extra cement ,complete, all as specified and as directed. |
| 42 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement,complete, all as specified and as directed. |
| 43 | Supply and fixing as in repair stainless steel wire cloths0.36 mm nominal dia of wire and averagewidth of aperture 1.40 mm and fixed with stainless steel wire staple ,complete, all as specified and as directed. |
| 44 | Preparation of newly plastered or un-plastered surfaces onwalls , cornices etc applyingtwo coats ofacrylic distemperover and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, of walls of any descriptionusing painting roller after preparation of brick/concrete, plastered / unplastered surfaces of walls ,complete, all as specified and as directed. |
| 45 | Material and labour for preparation of newly plastered/ unplastered surfaces of walls, chajjas, roof projection etc., and applying two coats of cement based paint with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed. |
| 46 | Material and labour forpreparation of new steel surfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer, complete, all as specified and as directed. |
| 47 | Material and labour for preparation of new woodensurfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and as directed. |
| 48 | Taking down chowkats or frames with shutterareanot exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete, all as specified and as directed. |
| 49 | Taking down chowkats or frames with shutterarea exceeding 1.50 Square meter andnot exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed. |
| 50 | Supply and fixing in replacement of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 51 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 52 | Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded ( Jointless ) door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing withfull body threaded star headed counter sunk S.S screws, completeall as per specification & drawing complete all as specified and directed |
| 53 | Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded ( Jointless ) gauzed door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing withfull body threaded star headed counter sunk S.S screws, completeall as per specification & drawing complete all as specified and directed. Note : Stainless steel wire mesh should be paid under separate item . |
| 54 | Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutterfabricated fromfollowing sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leafof T – section20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mmmade from 1.25 mm thickMS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i)Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf vi)Pintal hinges 12 x 75 mm- 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat ofred oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter ofwindow with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable.The window more than 1.00 metrewidth shall have two openable leaves onboth outer sidefor gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 55 | Material and labour PCC 1:3:6type B-1using 12.50mm graded stone agg as in holdfasts etc complete all as specified. |
| 56 | Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face for APP Membrance, galvalume sheet etc of groove filedwith cement mortar (1:3), complete all as specified and as directed. |
| 57 | Supply and fixing 150mm aluminium handles, cast type, anodised complete all as specified and as directed. |
| 58 | Supply and fixing 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 59 | Supply and fixing for250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed. |
| 60 | Supply and fixing Butt hinges, stainless steel medium weight100 mm size complete all as specified anddirected . |
| 61 | Supply and fixing for mild steel 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc ,complete, all as specified and as directed. |
| 62 | Supply and fixing stainlesssteel curtain rod 25mm dia having wall thickness 1.00mmfixed with and including stainless steeldecorative brackets, two lotto for each rod length at both endetcas in repair ,complete, all as specified and as directed. |
| 63 | Material and labour broken stone hardcoreof gauge notexc. 63mm, deposited , spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface ,complete, all as specified and as directed. |
| 64 | Material and labour for PCC (1:4:8) Type D2 40mm graded stone aggregate as in foundations, filling and mass concrete ,complete, all as specified and as directed. |
| 65 | Material and labour for vibratory rubber moulded coloured precast concrete interlocking paver block, any shape and sizeconforming to IS 15658-2006,ISI marked of 60 mm thickness, grade M-35 with grey cement andpigments over and including a layer of sand cushioning, 25 mm thick,complete, all as specified and as directed. |
| 66 | Material and labour for providing cement concrete 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, padding, rounded or chamfered on edges including from work where ever required , complete, all as specified and as directed. |
| 67 | Note:-Amount of credit ofRs.2,64,420.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 of tender doCubicmetre ents in pdf form which will be deducted offline while acceptance of tender. |
