|
| 1 | Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exc 50m and making good surface in soft /loose soil all as specified and directed. |
| 2 | M&L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate asin foundations,filling and mass concrete complete as specified. |
| 3 | M&L for rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality B complete all as directed. |
| 4 | S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and directed. |
| 5 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 6 | M/L preparing new surface of steel and appyling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed. |
| 7 | M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed. |
| 8 | M& L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement all as specified and directed. |
| 9 | M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm gradedaggregate) as in sub base complete all as specified and as directed. |
| 10 | M&L for hard core of gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed. |
| 11 | M&L Providing25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and fair to receive the floor finish completeall as directed. |
| 12 | M & L heavy duty vitrified unpolished porcelain floor tiles of size 300x300mm, 10 mm thick laid in floors/skirting etc of pattern as approved, set and jointed with Ezy Grout with spacers of Somany to match complete over 15 mm thick screed bed/rendering in CM (1:6) , complete all as specified and as directed. Make : Neo Deccan NAtural of Somany or Endura of Johnson or equivalent of other approved makes |
| 13 | M&L for complete removal of existing treatment on surfaces of ceiling andapplying with whiteputty of 1mm thick and making the surface to an evenand smooth finish by rubbing with sand paper of different grade etc andapplying two coats ofOil bound distermper over a coat of alkali resistantprimerby approved applicator of the manufacturer of the paint and all as specified. |
| 14 | M & L forcomplete removal of existing treatment fromold plastered surface of walls and applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer complete all as per manufacturer\"s instruction and as directed. |
| 15 | M & L forcomplete removal of existing treatment fromold plastered surface of walls and applying two coats of distemper oil emulsion with 1 mm thick putty over a coat of alkali resistant primercomplete all as per manufacturer\"s instruction and as directed. |
| 16 | S&F PVC(SWR) 150mm dia half round rain water gutter incl all joints etc complete all as directed. |
| 17 | S & F PVC (SWR) bends any radius 110 mm bore provided with acess door complete as specified. |
| 18 | S&F110 mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 19 | M&L Providing precast cement concrete in cover slabs Type B1 1:2:4 using 20mm graded aggregate set in cm 1:6 (Reinforcement shall be measured and paid seperately) |
| 20 | M&L TMT bars 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia. or securing with clips, complete all as specified and directed. |
| 21 | Material and labour for UPVC door with shutters .The construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be provided with UPVC board 5mm thick & 1Mtr in height andthe balance shall be glazed excluding the shutter frame area.The shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall beprovided with 5mm thick sheet glass & 5mm UPVC board with EPDM rubber gasket,one mortice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deemed with the quoted rate. Make : Madhu Industries / AMD overseas Ltd/ Fenesta/Aluplast/ Sarvesh Multiplast India Pvt Ltd |
| 22 | Supply and fix UPVCPartition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etcall as specifed and directed. Make : Madhu Industries / AMD overseas Ltd/ Fenesta/Aluplast/ Sarvesh Multiplast India Pvt Ltd. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design) |
| 23 | Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in hard/dense soil all as specified and directed. |
| 24 | M&L for Cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate asin foundations,filling and mass concrete complete all as specified and as directed. |
| 25 | Surface excavation n exc 30 cm deep and avg 15 cm deep and getting out in hard/dense soil etc complete. |
| 26 | Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed. |
| 27 | M& L for 100 mm thick PCC type C-2(1:3:6)using 40mm graded stone aggregate as in pavings,hard standing etc including finishthe surface even and rough to receive the top finish complete all as directed. |
| 28 | S & F Chequered cement concrete colour tiles20 cm x 20 cm x 25 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thickscreed bed in CM 1 :4all as specified and directed |
| 29 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240conforming to Fe-410-W(Gde-E-250) quality B complete all as directed. |
| 30 | M&L Light shade coloured Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirtingetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:3 complete all as specified |
| 31 | M & L for PCC (1:3:6) type C-1 (using20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks,etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 32 | Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slabin single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:3, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter topin steps, jambs, pillars, window-cills,etc, including cutting, polishing and rounding to edges of stone slabsetc., complete all as specified and as directed. |
| 33 | Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR) Board,/HDWR boardboth side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with samelaminated sheet to match with the other surfaces and nothing will be paid extra |
| 34 | Supply andStainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 35 | Supply and fixGun metal handle ofsize150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 36 | Supply and fixMagnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 37 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 38 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grithin brick wall remove debris from site. |
| 39 | Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and as directed. |
| 40 | Supply and fix Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterflyhandle confirming to IS screwed down, screwedfor iron pipes or for brass ferrule, fixed in repairs all as specified and as directed. |
| 41 | Supply andfixin repair 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcmin any length with rubber ring joint complete all as specified and as directed. |
| 42 | S&F Workstation of size 1200W*600DProviding and placing WISH - FINS AT END AND INTERMEDIATE based modular workstation, with partitionthickness as 52.4 mm thk and ht -1200 including powder coated aluminium trims.FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish.Tiles on main spine: Top tiles are fabric magneitc tile+White writing board. Bottom tiles - Plain metal .INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL+DL finish.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Legs - Metal Leg with powder coatingWorksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front with Cam lock, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file.CPU ( Central processing unit ) trolley - with castorsKBPT ( Key board plastic tray ) with mousetray - Metal Make: Godrej or equivalent Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. |
| 43 | S&F Table -Overall size- 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS:7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert isfixed, on to which a straight M8 leveler fitted which allows for adjustment of the heightupto 50mm. Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Make: Godrej or equivalent |
| 44 | S & F Storage - Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448WConstruction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing HingeHandle - Asthetically appealing handle made of AluminumCam Lock - -3 Way locking provision.- Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing.Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels. Number of files that can be stored in one shelf is as follows:900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Make: Godrej or equivalent |
| 45 | S &F overhead storage - Dimension - 600W*328D*785H, 600W1 X600W2X 328D PENTA Metal Body and Metal doorProduct Size - The ASCEND consist of main and Add-On unit type of construction with metal body and metal/wooden door option. ASCEND is availble in following sizes 300(Wmm/450(W/mm/600(W/mm/900(W)mm X 328**(D)mm X 785(H)mm. Depth includes door thickness. Body depth is 308mm. Stackability - Any width of add-on units can be stacked with any width of main unit and penta unit. Installation - The ASCEND should be installed on concrete or solid brick wall only. Construction & Material - Aesthetically appealing complete knock-down construction made from 0.5mm(#0.07 mm)THK CRCA as per IS 513 for back panel, side panel, side end cover panel, top panel, bottom panel & bottom panel cover. Doors - Wooden doors are made from 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS 12823:1990, Edge banded with matching 2 mm thick PVC lipping. 300W. 450W & PENTA units have single RH door with lock. 600W, 900W units have LH door & RH door with single lock on RH door. Soft closing Hinges Available with 105° door opening angle Handleless. Doors. Locking - Cam lock with lock lever at the bottom of the door. Shelving - Fixed shelves made up of 10 bend panel made of 0.6mm (for 300mm and 450mm Width land 0.8mm (for 600mm and 900mm width) Thick CRCA (D Grade, IS-513). A4 SIZE BOX FILES(85W×345Hx285D) can be stored vertically.Number of files that can be stored on each shelf is For width 300w - 3 Nos.Each shelf has max Load Capacity of 11.5kg of UDL for 300W unitFinish - Epoxy powder coated to the thickness of 50 microns(+10).Make: Godrej or equivalent |
| 46 | S & F workstation - size 1200W*600D Providing and placing WISH - FINS AT END AND INTERMEDIATE based modular workstation, with partitionthickness as 52.4 mm thk and ht -1200 including powder coated aluminium trims.FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish.Tiles on main spine: Top tiles are fabric magneitc tile+White writing board. Bottom tiles - Plain metal .INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL+DL finish.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Legs -NAWorksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front with Cam lock, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file.CPU ( Central processing unit ) trolley - with castorsKBPT ( Key board plastic tray ) with mousetray - MetalNote: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.Make: Godrej or equivalent |
| 47 | Gain pro storageDimension - 1950 H x 900 W x 450 DProduct Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448WConstruction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing HingeHandle - Asthetically appealing handle made of AluminumCam Lock - -3 Way locking provision.- Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing.Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels. Number of files that can be stored in one shelf is as follows:900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). |
| 48 | S & F Wish cubical Workstation - 1800W * 600D Main / 900W * 450D Providing and placing WISH based modular workstation, with partition thickness as 52.4 mm thk and ht -1200 including powder coated aluminium trims.Tiles on main spine: Top tiles are fabric magneitc tile+White writing board. Bottom tiles - Plain metal .INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in FAB+FAB finish.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Legs -Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 W1 X 1500 W2 X 600 DPedestals - Nova pedestal flat metal front with Cam lock, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file.CPU ( Central processing unit ) trolley - with castorsKBPT ( Key board plastic tray ) with mousetray - Metal |
| 49 | S & F overhead storage Dimension - 900W*328D*785HMetal Body and Metal doorA4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels. Number of files that can be stored in one shelf is as follows:900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).Product Size - The ASCEND consist of main and Add-On unit type of construction with metal body and metal/wooden door option. ASCEND is availble in following sizes 300(Wmm/450(W/mm/600(W/mm/900(W)mm X 328**(D)mm X 785(H)mm. Depth includes door thickness. Body depth is 308mm. Stackability - Any width of add-on units can be stacked with any width of main unit and penta unit. Installation - The ASCEND should be installed on concrete or solid brick wall only. Construction & Material - Aesthetically appealing complete knock-down construction made from 0.5mm(#0.07 mm)THK CRCA as per IS 513 for back panel, side panel, side end cover panel, top panel, bottom panel & bottom panel cover. Doors - Wooden doors are made from 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS 12823:1990, Edge banded with matching 2 mm thick PVC lipping. 300W. 450W & PENTA units have single RH door with lock. 600W, 900W units have LH door & RH door with single lock on RH door. Soft closing Hinges Available with 105° door opening angle Handleless. Doors. Locking - Cam lock with lock lever at the bottom of the door. Shelving - Fixed shelves made up of 10 bend panel made of 0.6mm (for 300mm and 450mm Width land 0.8mm (for 600mm and 900mm width) Thick CRCA (D Grade, IS-513). A4 SIZE BOX FILES(85W×345Hx285D) can be stored vertically.Number of files that can be stored on each shelf is For width 300w - 3 Nos.Each shelf has max Load Capacity of 11.5kg of UDL for 300W unitFinish - Epoxy powder coated to the thickness of 50 microns(+10).Make: Godrej or equivalent |
| 50 | Dismantling boarding/partition , any description, fixed in any position with screws all as specified and directed |
| 51 | Taking down chowkats or frames including shutters (without taking off shutters from the frames)exceeding 1.50 Sqm and not exceeding 4 Sqm each,complete all as specified and directed. |
| 52 | Supply and fixing factory made UPVC white colour Three track three panels sliding window/partition with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,incl Glazing shall be provided with 5 mm thick Plain / frosted glassfixed with appropriate size beading as per manufacurer\"s specificationsandStainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter,including 10 mm thickplastering all around windowopening and making good surface complete all as specified and directed. Make: Madhu Industries / AMD overseas Ltd/ Fenesta/ Aluplast.Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 53 | S & FPVC false ceilingconsisting of 600mm x 600mm, 5mm (±0.25) thick Prelam embossedPVC sheetof Density 600 Kg /Cbm Manufacturedby an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1” x1”( 25x25mm, 19 gauge or 1mm thick )insquare pattern of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is supported from the ceiling with the help of \"J\" hook and G.I. wire / 6mm M.S. rods of required sizes tomaintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1( 25x25mm ) angles etc. Complete as per direction ofmanufacturer’s specification & drawing Make : Rajashri or equivalent |
| 54 | M & L forcomplete removal of existing treatment fromold plastered surface of walls and applying two coats of distemper oil emulsion with 1 mm thick putty over a coat of alkali resistant primercomplete all as per manufacturer\"s instruction and as directed. |
| 55 | Dismantling ceiling board any description, any thickness incl cover fillets all as specified and directed |
| 56 | M&L forpoint wiring complete with1.5 Sq mmsingle core PVC insulated FRLSunsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealedincluding cuttingin floor / chases in wall / ceiling / fixed to roof /truss/ columns etc and including factory made branded make embossed PVC terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for 6 Amps on independent board point controlled by one modular switch 6 A one way all as specified and directed. |
| 57 | M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4) sq. mm + (1 x 4) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. |
| 58 | Supply & FixingModular type switch 6 Amp one Module, one way complete all as specified and as directed. |
| 59 | Supply & Fixing Modular type shuttered socket outlet , 3 Pin, 6 Amp, 230 Volts two modules with ISI mark complete all as specified and as directed. |
| 60 | S & F in repair SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed . |
| 61 | S&F Miniature circuit Breakers, SPN,of capacity 32 Amps C-Series 240 Voltswith breaking capacity 10 KA all as specified and dircted . |
| 62 | S&F Miniature circuit Breakers,capacity (6-32 Amps) single pole,C-Series 240 Voltsas ordered with breaking capacity 10 KA. |
