|
| 1 | M & L for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed. |
| 2 | M & L for Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed. |
| 3 | M & L for preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour all as specified and as directed |
| 4 | M&L for applying two coats of Oil bound distemper to wall over a coat of primer over a wall care putty(1 mm thick)including complete removal of existing treatment all as specified and directed. |
| 5 | M&L for complete removal of existing treatment on wall, chajjas & cantilever portionand making good theundulated surfaces of wall, chajjas and cantilever portion by filling of putty including rubbing, scraping & grinding make the wall surface smooth & applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of asian paint over a coat of primer on prepared external surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour all as specified. |
| 6 | Preparationof old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 7 | Preparation of oldsteel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | Taking down cement plaster on brickor concrete surfaces / ceiling, racking out joints hacking for key scrubbing downwith water etc complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 10 | M&L for preparation of new plastered wall surfaces and including applying two coats of oil bound distemper overa coat of primer and over wall care putty (1mm thick) to obtain smooth finish completeall as specified and directed. |
| 11 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 13 | Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each. |
| 14 | -Ditto- all as per above item but exc. 1.5 Sqm but not exc. 4.0 Sqm each |
| 15 | Taking down shutters of any description not exc 1 Sqm each. |
| 16 | -Ditto- as per above item but exc. 1.0 Sqm but not exc. 2.0 Sqm each |
| 17 | Taking down, easing, adjusting and refixing in the same opening shutters of any description not exceeding 1 Sq. Meach and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 18 | Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing builders hardware as required including renewal of unserviceable screws etc. complete. |
| 19 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed second class hardwood complete all as specified and as directed |
| 20 | S&F 30 mm thick factory made flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side complete all as specified and directed. |
| 21 | Supply and fix 30mm thicksecond class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately). |
| 22 | S&Fsolid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. |
| 23 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fortop rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. |
| 24 | M&L for anodised aluminium power coated (minimum thickness of powder coating 50 micron) framefor doors, sliding window three track ,ventilator etc with one or more rebatesincluding all jointing cleats,etc complete all as specified and directed. |
| 25 | S&Fpowder coated of any colour (thickness of powder coating not less than 15 micron) aluminium window/ventilator shutters of sliding type without sash , aluminium sections weighting0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, rollers, holding and also with locking (arrengements complete all as specified and directed.Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately. |
| 26 | S&F aluminium anodised powder coated of any colour(thickness of powder coated not less than 15 micron ) aluminium grill of Make \"Deco drill\" aperature size 50x50mm, thickness 5.5mm and width 5mmfixed with suitable channel all as specified and directed. |
| 27 | S&F 4.8 mm thick sheet glass selected quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed |
| 28 | S&F in repairs 3.00mm thicksheet glass, ordinary quality and glazing with oil putty/wooden beadsin squaren.exc 0.5 sqm in each pane. |
| 29 | S&F 4.80 mm thick frosted, obsecured or grounded sheet glass, ordinary quality and glazing with oil putty/wooden beadsin square but not exc 0.5 sqm in each pane. |
| 30 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed. |
| 31 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed. |
| 32 | S & F in repairs 100mm long medium weight cold rolled mild steel butt hinges etc all complete |
| 33 | S&F 100 mm butt hinges, medium weight, cold rolled mild steel and etc all complete |
| 34 | S & Fin repairs Aluminium anodised barrel tower bolt all as above but 150mm long etc all complete |
| 35 | S & F in repairs Aluminium anodised barrel tower bolt all as above but 125mm long etc all complete |
| 36 | S & F Aluminium anodised barrel tower bolt all as above but 150mm long etc all complete |
| 37 | S & F Aluminium anodised barrel tower bolt all as above but 125mm long etc all complete |
| 38 | S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long etc all complete. |
| 39 | S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 125mm long etc all complete. |
| 40 | S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long etc all complete. |
| 41 | S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long etc all complete. |
| 42 | S&F in repairs aluminium alloy anodized sliding door bolt 300mm long with fixing clips etc complete. |
| 43 | S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified. |
| 44 | S&F in repairs aluminium anodized hooks and eye 150mmlong. |
| 45 | S& F in repair aluminium powder coated door seal with brush fixed by screw at bottom of door all as speified and as directed |
| 46 | S &F repairs Floor door stopper 150 mm of aluminium alloy bodydouble tongue with rubber shoe fixed on door shuttercomplete all as specified and as directed. |
| 47 | S &F of Floor door stopper 150 mm of aluminium alloy bodydouble tongue with rubber shoe fixed on door shuttercomplete all as specified and as directed. |
| 48 | S & F in repair curtain rails of mild steel chromium plated with fixing brackets, stops, rollers etc complete |
| 49 | S & F in repairs Door closer hydraulically regulated of Extruded Aluminium Section, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 50 | S & F as in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with necessary clipsfixed as in cupboard shelves/shutter complete all as specified and directed. |
| 51 | S&f in repair continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed |
| 52 | S&F in repairs 100 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 53 | S&F (in repair) MS helical door spring 150 mm size incl roller and roller platefixed to wooden or steel frames with welding etc complete all as specified and directed. |
| 54 | S&F in repairs CP ABS body hand faucet with hose & hook for EWC including all necessary fitting complete all as specified.(Make : Prayag Cat No 452 or eaualent ) |
| 55 | Petty Repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection,PVC/GI bend replaceing of rubber washers check nuts plugs etc for any type of flushing cistern complete all as specified and as directed. |
| 56 | S&F in repairs PVC (EWC)seat cover white colour with flat bottom including PVC/CP hinges complete all as specified and directed. |
| 57 | S&F in repairs5 mm thick bevelled edge looking mirror of size 600X450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixedto wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 58 | S&F in repairs Bib taps of 15mm dia chromium plated cast copper alloy of fancy typescrewed down for iron pipecomplete all as specified and directed.. |
| 59 | Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders and including making good the disturbed surface on walls, complete all as directed. |
| 60 | M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volt, FRLSH grade of size 1.5Sqmm drawn through and including surface PVC casing & caping (ISI Marked) with accessoriesincluding 1.5 sqmm copper conductor cable for earth continuty green in colour for one light point/fan point/Bell point/complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge. (ii) Unserviceable hylem sheet and ms sunken boxes/PVC boxes wil be replaced as per requirment and same shall be measured and paid seperatly under relevant items of this schedule. |
| 61 | Ditto- all as per item No 02 here in above but for One 3/5pin 6Amp Socket outlet on the same board with other switches complete all as specified and as directed. |
| 62 | Ditto- all as per above items but for One 3/5pin 6Amp Socket outlet on the independent board complete all as specified and as directed. |
| 63 | Ditto- all as per above items but for One call bell point control by one bell push switchcomplete all as specified as directed. |
| 64 | Ditto- all as per above items but for one light point controlled by two 2 way switch complete all as specified and as directed. |
| 65 | Description all as per above items but for 15/16Amp switch socket out let, independent with 2.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor, complete all as specified |
| 66 | Supply and fix in repair switch piano flush button 6 Amp single pole, one way complete all as specified and as directed . |
| 67 | Supply and fix in repair socket out let 5 Pin, 5 Amps flush typecomplete all as specified and as directed. |
| 68 | Supply and fixing in repair of switch socket combination 2 pin & 3 pin 5 Amp,230 volt,multipurpose, 2 screw to fix on board complete all as specified. |
| 69 | Supply and fixingin repair of switch socket combination 5 in 1 type, 3 pin 5 / 15Amp,230 volt,multipurpose, 4 screws to fix on board complete all as specified. |
| 70 | Supply and fixingin repair of switch paino,flush type,single pole,two way, 5/6 Amp, complete all as specified. |
| 71 | Supply and fixingin repair of bell push, 5 Amp, 230Volt, complete all as specified. |
| 72 | Supply and fixingin repair of bell electric Ding Dong type, Ac 230 volts fixed complete all as specified |
| 73 | Supply and fixing in repair of ceiling rose, surface Bakelite 65 x 30mm, three terminals,complete all as specified. |
| 74 | Supply and fixingin repair of Fan regulator, electronic step typefor ceiling fan of any sweep including connecting in circuit with three core flexible PVC copper conductor of size 1.5 Sq.mm, complete all as specified. |
| 75 | Supply and fix in replacement angle holder for LED bulb of any type Complete all as specified |
| 76 | Supply and fix in replacementLED retrofit lamp B22holder base with polycarbonate body and aluminium heat sinkof 09/10Wall as specified and as directed. Make : HPL/Havells/Philips/Bajaj |
| 77 | Supply and fix in replacement 9 /10 W tube light fitting with lamp, Endura Linea LED wall mounted led batten with polycarbonate housing and integrated driven for efficient heat dissipation having THP <20% with Compact LED Smartbrite Batten complete fittingall as specified and as directed. Make -Philips/CG/HPL/Bajaj |
| 78 | Supply and fix in replacement of 10 Watt PDC Housing LED bulkhead luminaire Opal diffuser,equipped with 2kv in-built surge potection with IP65 ,CCT 5700k impact resistance suitable for surface and wall mounting applications complete all as specified and as directed.Make- HPL/Crompton/ Havells/Philips/Bajaj |
| 79 | Supply and fix in replacement LED 4fttype 20 w 2100 Lumen LED Tube LED tube with polycarbonate housing designed for high performance complete fittingall as specified and as directed, Make-CG/ Havells/Philips/Bajaj |
| 80 | Supply and fix in replacement of4ft length 20w tubelight fitting with lamp, Endura,linear LED wall mounted led batten with polycarbonate housing and integrated driven for efficient heat dissipation having THP <20% with Compact LED Smartbrite Battencomplete fittingall as specified and as directed. Make - CG/Havells/Philips/HPL/Bajaj |
| 81 | Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. Make- CG/Havells/Philips/HPL/Bajaj |
| 82 | Supply & fixing in replacement street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5mtr long alongwith 2 Nos clamps of size 32x6mm flat iron and including nuts, bolts, washers suitable for fixing on Buildings including 2 coats of synethic enamel paint over clamp a coat of red oxide primer complete all as specified |
| 83 | Supply and fix in replacement offactory made sheet metal enclosure withprotected type 2 pin and earth plug and complete socket with one MCB SP 240 volt, 20 Amps all as specified. |
| 84 | Taking down and re-fixing of existing hanging cashing caping wiringwith proper saddles, complete all as specified. Note :- (i) PVC conduit will be measured and paid separately (ii) Making good distrubed surfacedeemed to be inclusive of quotedrate |
| 85 | Supply and fixing in repair of Hylem sheet (ISI Marked) of size 9X11inch with 4 no of screws and washers all as directed by Engr-in-charge. |
| 86 | Supply and fixing in repair of Hylem sheet(ISI Marked) of size 5X7 inch with 4 no of screws and washers all as directed by Engr-in-charge. |
| 87 | Supply and fixing in repair of Hylem sheet(ISI Marked) of size 5X5 inch with 4 no of screws and washers all as directed by Engr-in-charge. |
| 88 | Supply and fixing in repair MS sunken box of size 8 x 10 inch with 4 no of screws and washers including taking down the existing and making good to match the existing surface completeall as directed by Engr-in-charge. |
| 89 | Supply and fixing in repair MS sunken box of size 4 x 6 inch with 4 no of screws and washers including taking down the existing and making good to match the existing surface completeall as directed by Engr-in-charge. |
| 90 | Supply and fixing in repair MS sunken box of size 4 x 4 inch with 4 no of screws and washers including taking down the existing and making good to match the existing surface completeall as directed by Engr-in-charge. |
| 91 | supply and fixin repairs wiring withtwo run of 4.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH gradeand one run of copper earth wire 4.0 Sq mm drawn through PVC casing and caping, complete all as specified. Note : Copper conductor 2 run and one run of copper earth wire along withPVC casing and caping shall be measured as one length. |
| 92 | supply and fix in repairs wiring withtwo run of 6.0 Sq. mm PVC sheathed, copper conductor cable, 1100 Volt, FRLSH grade and one run of copper earth wire 6.0 Sq mm drawn through PVC casing and caping, complete all as specified. Note : Copper conductor 2 run and one run of copper earth wire along with PVC casing and caping shall be measured as one length. |
| 93 | S & F in repairs sub main wiring with 4 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLSH grade with drawn insurface casing-caping not less than 25mm dia and one run of PVC insulated unsheathed of 6 sqmm as earth continuity conductor drawn in PVC conduit / casing and capping with accessories completeNOTE: 4 runs of 6 Sqmm, 1 run of 6 Sqmm and 1 run of conduit will be measured as one unit i.e RM |
| 94 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as directed by Engr-in Charge. |
| 95 | S&F in repair Rigid non-metallic PVC conduit of size 25 mm in dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc |
| 96 | M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thickswitch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessarywall cutting and making good disturbed surface allas directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision) |
| 97 | -Ditto- all as per above itemsbut for one light point controlled by one two way switch |
| 98 | -Ditto- all as per above items but one 3 pin socket outlet 5 Amps on same board. |
| 99 | -Ditto- all as per above item but for 15/16 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductorand 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire. |
| 100 | Supply and fixModular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 101 | Supply and fixmodular Socket, 6A -3 pin combined 2 module, complete all as specified and as directed. |
| 102 | Materials and labour for modular type Fan step regulator, 120W - 2 modulecomplete all as specified and as directed. |
| 103 | Supply and fix modularsocket combination multi purpose 2 in 1, 5 Pin,6 and 16 Amps, flush typecomplete all as specified and as directed. |
| 104 | Supply and fixModular switch 1 way 16A, 1 module complete all as specified and as directed. |
| 105 | M&L forspray painting with white synthetic enameled paint after preparation of old surface of the ceiling fan of any make/model/sweep, including filling cavities with filler after cleaning dust complete including writting MES number all as specified and as directed.Make : Berger/Asian/ Jenson & Nocholson |
| 106 | -Ditto- all as per above items but for Exhaust fan of 380/300 mm sweep of any make and painted with grey colour. |
