|
| 1 | Demolition of complete existing treatment of roof/ parapet ,Mud puska on roof /parrapet including plastering, brick tiles, stone slabs and leeping any thickness including removal etc complete . |
| 2 | M&L Brushing neat cement slurry (3 Kg of cement per Sq M) mixed with chemical compound in the proportion, chemical compound SUPER LATEX of DR FIXIT of PIDILITE INDUSTRIES LTD,water & cement (1:4:7) or SBR LATEX of STP LTD or other equivalent as per manufacture instructions for bonding of old concrete surface to new concrete all as specified & directed complete.(Note: WPC will be measured and paid seperately.) |
| 3 | M&L PCC 1:2:4 type B-0(using 12.5mm graded crushed stone aggregate) mixed with integral waterproofingchemical PIDIPROOF LWmixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILITE INDUSTRIES LTD, or STP No 1 (LIQUID) of STP LTDin proportion 200 millitire per 50 Kg cement, as in padding, benching,Sunken portion etc on roof surface for corecting/making proper slope on roof, etc complete. |
| 4 | M&L Rendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces with liquid water proofing compound@ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smoothwithout using extra cement over roof / sunken slab /wall complete all as specified and directedNOTE : water proofing liquid will be measured and paid seperately . |
| 5 | M&L for Water proofing treatment on \"Not Approachable /Inaccessible roof\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete(i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(iii)Applying evenly tack coat of industrial 85/25 grade @ 1.2 kg/ Sqm.(iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.(v) Applying a coat of bitiminous aluminium paint @ 100 Gram / Sq M over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 Kg/ Sqm duly sanded over polymeric membrane complete. |
| 6 | Supply only water proofing compound (liquid),ISI marked. |
| 7 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber,frame (88mm x 52mm),sliding sash (42mm x 67mm),sliding interlock (one vertical length in each shutter)(45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water ets, making arrangement for fixing of hardware, EPDM gasket. 1.2 +- 0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos,sliding sash (30mm x 18mm) 2nos,sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated),steel roller system,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all oyher connected accessories) area n.exc.2.00 sqm each fixed from ground floor to height of 12 floors |
| 8 | S&F 7 mm thick aluminium grills of make \"Decogrill\" model DG 104 surrounded by aluminum \"C\" channel and size of opening 75x75 mm all as specified and directed fixed from ground floor to height of 12 floors |
| 9 | S&F factory made uPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3 mm (+-2mm). Window profile with hollow section with multi chamber .Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion welded at all corners. including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware,EPDM gasket. 1.2 +-0.2mm thick.galvanized steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5mm thick glazing with selected quality glass (Note: The unit rateexcludes cost of glass and includes all other connected accessories.) area n.exc. 1.00 sqm each. |
| 10 | S/F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane |
| 11 | S&F 4.8mm thick tinted glass ordinary quality and glazing with rubber gasket in squares exceeding 0.50 sqm in each pane |
| 12 | S/F of staineless steelwire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium/pvc sections fixed from ground floor to height of 12 floors |
| 13 | S&F in repairGalvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified. |
| 14 | S&F in repair block board decorative type interior gradeon both faces & veener on both faces incliding polishing and texture as approved by Engr-in-Chargecomplete all as specified and as directed |
| 15 | S & F continuous (Piano) hinges M S bright finish or Electro galvanized 40 mm wide flaps (when open). |
| 16 | S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished |
| 17 | S&F 2nd class hardwoodplain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area exc 13 & n exc 25 Sqcm complete. |
| 18 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete. |
| 19 | M&L brick work with sub class \"B\" brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 |
| 20 | M/L Half Brick thick wall with sub class \"B\" bricks built in CM 1:4 |
| 21 | Taking down cement plaster on wallof any description incl racking out joints hacking for key and scrubbing down with water complete. |
| 22 | M&L 10mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete |
| 23 | M/L rendering 15mm thick (10mm + 5mm)in CM 1:4 in two coats on fair faces of brick work , finished even and fair without using extra cement with WPC. |
| 24 | M/L rendering 05 mm thick in CM 1:3 on fair faces of concretefinished even and fair in ceilings |
| 25 | M & L for new plastered surfaceof walls of any description by washing, rubbing down and applying two coats of apex paint by machanical applicator over 2mm wall care putty and a coat of cement primer complete as specified and directed. |
| 26 | M&L three coat of white wash on newly preparedsurfaces on ceilling , etccomplete. |
| 27 | M & L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted overa coat of chalk whiting, complete all as specified & directed |
| 28 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete. |
| 29 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete a directed. |
| 30 | Demoliton of cementconcrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete. |
| 31 | M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cilletc complete. |
| 32 | M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete |
| 33 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. |
| 34 | S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC \"P\" or \"S\" trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 35 | S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover ofwhite colour all as directed and specified. |
| 36 | S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WCwhite colour. |
| 37 | S&F in repairs PVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed. |
| 38 | M&L for cement concrete type E2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets |
| 39 | M&L for rendering 15mm thick in cement mortar 1:4 with water proofing compound2% by wt of cement, finished even and smooth withot using extra cement in sunken portion complete all as specified. Note:- WPC shall be measured and paid separately |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete. |
| 41 | M&L for non skid coloured ceramic tiles 400x400x7 to 8 mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 42 | M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirtingetc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement |
| 43 | M&L for joint free vitrified tiles any coloured/ finishes/ pattern 9 to 10 mm thick(square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 44 | M&L for joint free vitrified tiles any coloured/ finishes/ pattern 9 to 10 mm thick(square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in, skirting, dado, etc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 45 | M&L Factory made pre-polished Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 46 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each inclstacking for issued under Sch of Credit. |
| 47 | .Description all as per ser item No 46 above item but exc1.5 Sqm but n.exc. 4 Sqm. |
| 48 | Taking down shutters of any description exc 1 Sqm & not exc 2 Sqm each |
| 49 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 50 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as specified. |
| 51 | S & F Pressed steel frames125x60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 52 | S & F Pressed steel frames105x60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 53 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming toFe -290 Gde E-165 |
| 54 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 55 | M/L 35 mm thick 2nd class hardwood, factory made plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercialon both faces. The size of rail and style as per IS: 1003(Part - 1),kiln seasoned and chemically pressure treated & and fitted to chowkats complete all as directed. |
| 56 | S & F 30 mm thick 2nd class hardwood, factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats. |
| 57 | S & F 35mm thick2nd class hardwood glazed and skeleton shutters of any no of panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash barsand prepared to receive glass, gauze etcedges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etccomplete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE\"s office. |
| 58 | S&FGalvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks/wooden patti etc complete all as specified. |
| 59 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 60 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long. |
| 61 | S & F Aluminium anodised handles of extruded section and fixed 125 mm long. |
| 62 | S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 63 | S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 64 | S & F250 mm long mild steelsliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed. |
| 65 | MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete. |
| 66 | M/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer all as spfd . |
| 67 | M&L for preparing old painted wooden surfaces of any description not otherwise described , over 10 cm in girth or width and applying one coat of synthetic enamelpaint of approved shade all as specified and directed by EIC |
| 68 | S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 69 | Demolition of cement concrete reinforced as in chullah hoods , shelves and plate formetc complete all as specified and directed |
| 70 | M&L for RCC as in kitchen platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified |
| 71 | S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc all as specified. |
| 72 | M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteincluding circular cutting,chamfering of edges as required. |
| 73 | M/L screed bed or bedding layer of mortar 20 mm thick for layinng floor finishes in CM 1:4 for fixing tiles/stone. |
| 74 | S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I |
| 75 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as directed and specifed . |
| 76 | Taking up or down GI steel tubing in any position and connection including fitting, cleanings for reusing if any as specified and as directed for the following size :- |
| 77 | 15mm bore |
| 78 | 20mm bore |
| 79 | Supplying and laying of specified outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 with all required fittings ,clipping on walls/ceiling or laying in floors u complete all as specified. for the following size :- |
| 80 | 20 mm bore |
| 81 | 25 mm bore |
| 82 | S&Fin repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed. |
| 83 | S&Fin repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed. |
| 84 | S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed . |
| 85 | S&Fin repair stop valve 15mm chromium plated screw down, high pressurewith crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed |
| 86 | Description all as per ser item No 81 above Item but two way angle cock |
| 87 | S&Fin repair 15mm diaBrass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed compete.. |
| 88 | S&Fin repairs15mmdia pillar tap swan neck cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \"Hot or Cold\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 89 | S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and specified. |
| 90 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling |
| 91 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 92 | S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag) |
| 93 | S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC |
| 94 | S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird |
| 95 | S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) Complete. |
| 96 | S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete. |
| 97 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 98 | Taking down eaves gutter and rain water pipes (any size or pattern ) including all fittings, heads shoes bend swan necks etc at any position( measure overall as fixed along the centre line over fitting and accessories ) all as specified and directed. |
| 99 | S& F PVC (SWR) pipe of 110mm dia single socketed in any length with rubber ring jointsfixed to walls all as specified. |
| 100 | S&F PVC (SWR)bendsor shoe of 110 mm diabore |
| 101 | PVC (SWR) junction single, (Single T)110 mm diabore equal or unequal |
| 102 | S/F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint fixed to wall complete. |
| 103 | S/F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint laid in trenches complete. |
| 104 | S&F PVC (SWR)bendsor shoe of 75 mm diabore |
| 105 | PVC (SWR) junction single, (Single T)75 mm diabore equal or unequal |
| 106 | Providing pressure gunnitingaveraging 25mm thick in cement mortar 1:3 for soffits of slabs. Chajjas etc complete all as specified and directed including providing double scaffolding as required and removal of the same on completion of the work complete all as required and directed and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc or its equivalent in M/s. Dr. Fixit] prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. |
| 107 | Providing pressure gunnitingaveraging 30 mm thick in cement mortar 1:3 for columns / beams/ fins/parapetscomplete all as specified and directed including providing double scaffolding as required and removal of the same on completion of the work complete all as required and directed and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc or its equivalent in M/s. Dr. Fixit] prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. |
| 108 | M & L for repairing broken edges of chajja\"s, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates ,to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately) |
| 109 | M&L for expanded metal n.exc 4Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all asspecified and directed. |
| 110 | M & L for taking down and repairs in patches(area n.exc 2.00Sq min each patches)to plaster/loose surfaces of concrete slabs in sun-shades, chajjas, fascia,shelves, cills, landingsin cement mortar 1:4 /cement concrete 1:2:4 including all necessary arrangments for complete repairs all as specified and directed.(Note : Reinforcement/expanded metal if any provided shall be measured and paid separately) |
| 111 | M&L mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 112 | S&F in repairs looking mirrorselected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer |
| 113 | S&F in repair chromium plated 25 mm conduit curtain rod with decoretive chromium platedbrackets as requiredapproved designand fixed to wall complete all as specified and directed by engr in charge. |
| 114 | M&L wall care putty 2mm thick including necessay preparation or already prepared surface complete all as specified and directed. |
| 115 | M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete. |
| 116 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 117 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 118 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 119 | Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesandrefixing the celing fan obtainedwith replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal complete all as specified and as directed. |
| 120 | M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable in andincludingConcealed PVC conduitof size 20/25mm ISImarked inclusive oftees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc withwhite laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalincludingcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 121 | One light point controlled by one, one way switch 5 Amps |
| 122 | One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 123 | One light point controlled by one, two way switch 5 Amps |
| 124 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 125 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 126 | One bell point controlled by one, bell switch 5 Amps |
| 127 | Description all as per ser item No 116 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 128 | S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. |
| 129 | S & F for Switch Piano type2 way switch 5 amp, 230 Voltscomplete all as specified and directed at site. |
| 130 | S & F for switch bell push pianotype 5 amp, 230 Volts Complete all as specified and directed at site. |
| 131 | S & F for Switch piano flush type single pole, one way, and 15/16 Amp single module complete all as specified. |
| 132 | S & F forsocket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site. |
| 133 | S&F switch socket combination 2 in 1, 3 pin, 5/15 amp multipurpose, flush type universal, all as specified and as directed |
| 134 | S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site. |
| 135 | S & Ffor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 136 | Supply and fixing ceiling rose surface bakelite3 terminals 65 x 50mm complete all as specified. |
| 137 | M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed.Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 138 | S & F for sheet metal enclosure MCBDBTPN4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 139 | S & FforMCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 140 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 141 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 142 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 143 | S & F forLED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 144 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 2 years from date of installation andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 145 | S & F for wall mounted LED tube light fitting 40 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 2 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 146 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 147 | S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC). |
| 148 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
