|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 3 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as requireda) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 5 | Supplying of following size of XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No:1554 (Part-I) 1988 as applicable Make: CCI/Gloster/ Havells/ Polycab/Finolex etc as reqd. a) 25 Sq.mm x 3.5 Core |
| 6 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.a) Upto 35 sq. mm |
| 7 | Supplying and layingof one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS: No.14930 Part -I & IIcomplete with necessary HDPE fitting for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation and refilling the trench etc., as required. a)50 mm outer dia & 38 mm Inner dia |
| 8 | Supplying and layingof one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS: No.14930 Part -I & IIcomplete with necessary HDPE fitting for protection of 1.1 KV grade following size on wall surface as required.a) 50 mm outer dia & 38 mm Inner dia (clamped with MS flat clamp) |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. a) 3½ X 25 sq. mm (28mm) |
| 10 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 11 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required |
| 12 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. asrequired. |
| 13 | Supplying and fixing brass batten/ angle holder includingconnection etc. as required. |
| 14 | Installation, testingand commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required. |
| 15 | Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cableetc. as required. |
| 16 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioningetc. as required. a)Upto 450 mm sweep |
| 17 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)a)12 way, Double Door |
| 18 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) Single Pole |
| 19 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 A |
| 20 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeof 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 21 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut,bolt, spring, washer excavation and re-filling etc. as required. |
| 22 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 23 | Supplying of T8 20W Fitting Make Philips Model TMC 501 P 1xT-LED 22W P3241 with LED Tube 20W of Make Philips Model Essential LED Tube 1200mm 20W865 T8 IND I or its equivalent etc., as required. |
| 24 | Supplying of 15W LED Lamp CDL, 6500 K directly fitted in button holder as equivalent to Havells CLASSY LED 15W B22 CDL 3 STAR Order Code LHLDEUEEML8R015 or its equivalent or its equivalent |
| 25 | Supplying of Metal body 300 mm Exhaust Fan Similar to Make Crompton Semi Commercial Model 300mm TRANSAIR (Double Ball Bearing)or its equivalent etc., as required |
| 26 | Supplying of BLDC Ceiling Fan 1200mm SweepISI Marked(Color: Opal White, Brown) Similar toCrompton Energion Riviera (ISI) with out remote orits equivalent(ISI Marked and BEE 5 Star Rated) power consumption with switch control, 5 years warranty etc., as required. |
| 27 | Supplying and Fixing of Socket Type Stepped Type Electronic FanRegulator equivalent to Pressfit Glory 5 Step Regulator (Board) Coad-546070 on the existing Gang Box including connection or its equivalent, etc., as required. |
| 28 | Supplying and Fixing of Street Light 45W IP65 similar to Crompton FREEDOM NEO LSTS-45-CDL-M i/c suitable size 45 degree street light bend pipe arm with clamping or its equivalent, etc., as required. |
