|
| 1 | Top Plain Shelf Unit 500mm (Steel) (Kitchen Room-Wall Cabinets) |
| 2 | Top Plain Shelf Unit 500mm (Steel) (Kitchen Room-Wall Cabinets) |
| 3 | Top Plain Shelf Unit 500mm (Steel) (Kitchen Room-Wall Cabinets) |
| 4 | Top Plain Shelf Unit 500mm (Steel) (Kitchen Room-Wall Cabinets) |
| 5 | Utensil Unit 600mm (Steel) (Kitchen Room-Wall Cabinets) |
| 6 | Gas Cylinder Unit 400mm (Steel) (Kitchen Room-Wall Cabinets) |
| 7 | Plain Shelf Unit 800mm (Steel) (Kitchen Room-Wall Cabinets) |
| 8 | Tail CrockeryUnit 900mm (Steel) (Kitchen Room-Wall Cabinets) |
| 9 | Tail CrockeryUnit 900mm (Steel) (Kitchen Room-Wall Cabinets) |
| 10 | Carcass Side Panel 4100 x 1900H |
| 11 | Carcass Side Panel 3100 x 900H |
| 12 | Carcass Side Panel 5600 x 700H |
| 13 | Skirting 100mm Height Rehau Make Black |
| 14 | Black Skirting Hardware Packet of 100 mm for Kitchen Cabinets |
| 15 | Ebony Handle PITCH 128 mm Finish Black Powder Coated |
| 16 | End Leg Channel for Floor/Tall Unit 560D (Pac of 1) |
| 17 | Shared leg Channel for Floor/Tall Unit 560D (Pac of 1) |
| 18 | Legs 100mm |
| 19 | Screws & Shelf Support for Metal Kitchen Accessories |
| 20 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 21 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including\" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 22 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 23 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 24 | Providing P.C.C. M150 with normal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, tax and royalty all complete job as per building specification and direction of Engineer in charge. |
| 25 | Provinding and laying 60 mm thick factory made cement concrete interlocking paver block of m-30 grade by blocking compaction and pattern over and including 50 mm thick compaction of approved size and design and shape laid in required colour and pattern and bed of coarse sand filling the joints with fine sand do-do-E/I |
| 26 | Providing R.C.C. M 200with normal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. |
| 27 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 28 | Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l. |
| 29 | Providing desination 100 A brick work with fly ash lime brick (FLAG) conforming to IS 12894 - 1990 (9\"\" x 4.5\"\" x 3\"\") in C.M. (1 : 6) in superstruture and plinth with apporoved qulity of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening material, raking out joints to 15 mm depth, taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing desination 112 mm thic reinforced desination 100 A brick work with fly ash lime brick (FLAG) conforming to IS 12894 - 1990 (9\"\" x 4.5\"\" x 3\"\") in C.M. (1 : 4) in superstruture with apporoved qulity of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening material, raking out joints to 15 mm depth, taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing R.C.C. M200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clen coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I |
| 32 | Providing precast R.C.C.M - 200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 33 | Providing R.C.C. M200 with nominal mix of (1:1:2) in band at lintel level with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I |
| 34 | Providing R.C.C. M200 in band at plinth level with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I |
| 35 | Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 36 | Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 37 | Providing 35mm thick precast R.C.C. M-20 with npminal moxof (1:1:5:3) shelves with approved quality of stone chips 20mm to 10mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5mm cement punning at top and side and 6mm. Cement plaster (1:4) at bottom including screening, curinga nd placing the slab in position (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I |
| 38 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in stiffners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 39 | Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in stiffners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 40 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) |
| 41 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 42 | Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l. |
| 43 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat ofapproved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 44 | Providing and laying Double charge virtified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622/ ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grounting the joints with white cement and matching pigments etc. complete Size of Tile 600x600mm |
| 45 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 46 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 47 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 48 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 49 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 50 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 51 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including preparing the surface after cleaning removing dust, dirt. scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement of area shall be multiple by the co-efficient as indicated in building specification) |
| 52 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 53 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 54 | Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 (i) 8 mm dia steel Qty. |
| 55 | (ii) 10mm dia steel Qty. |
| 56 | (iii) 12mm and above dia steel Qty. |
| 57 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 58 | Providing 150 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 125 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I. |
| 59 | Fencing With Welded Steel Wire Fabric 75 mm x 50 mm (Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.) |
| 60 | Painter Class-I for building,boundary and gate Painting as per direction of E/I |
| 61 | Centring and shuttering including strutting ,propping etc. and removal of form for a) Foundation, footing,bases of columns |
| 62 | b) lintel,beam, plinth beam and cantilever |
| 63 | c) column and pillars |
| 64 | ROOFS,LANDING AND BALCONY |
| 65 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. \"p\" trap 15 liters C.I. or C. pull and letgo flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathen/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chan and pull inclding supplying and fixing a pair of viterous white lazed earthenware where footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weiht not less than 50 grms. 15mm P.V.C. connection pipe 150mlong and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL/ SUPREME) 15mm dia |
| 67 | 20mm dia |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL/ SUPREME) Exposed on Wall 25mm dia |
| 69 | Supplying of brick bat ……..DO……….complete as per direction of E/I. (Approved |
| 70 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 71 | 110 mm diameter |
| 72 | Cost of Drilind 125/115Tube well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 30.00 M below G.L. |
| 73 | (b) From 31.0 M to 60.00 M |
| 74 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia |
| 75 | Supply fitting and fixing lowering 32 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I. |
| 76 | S/F/F of standard ISI mark deep well hand pump for INDIA mark-2 15500 (part 2)/ 2004…………do ………..including all taxes ,royalty etc all complete job as per direction of E/I. |
| 77 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. Approved make supported on painted C.I. Or R.S. Bracket 32mm C.I. Brass waste, 15 mm dia C.I. Body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plunber joints etc. all complete as per specification and direction of E/I. |
| 78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 79 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 80 | Polythene water storage tank of mark with cover and suitable locking system in double layer confirming to IS :120701-1996 with latest revision |
| 81 | Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 1.5 HP |
| 82 | FR PVC Insulated 3 Core 4 Sqmm copper wire |
| 83 | Providing and fixing Mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. |
| 84 | Providing and fixing c.p. towel rail complite with brackets fixed to wooden cleats with c.p.brass screws with concealed fitting arangement of approved qualite colour and make.(Prayag or equipment) |
| 85 | Wiring for light/fan point/ exhaust fan point / call bell point with 1.5 Sq mm FRPVC insulated copper conductor single core cable in surface/ recessed PVC conduit with Modular Plate suitable G.I Box and Earthing the point with 1.5 Sq mm FRPVC insulated Copper Conductor single core cable etc asr reqd. Group C |
| 86 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x2.5 Sqmm + 1x2.5 sqmm earth wire |
| 87 | S/F metal box of 180mm x 100mm x 60 mm deep (nominal size) on surface/recessed with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16 Amp socket outlet and 15/16 Amp piano type switch connection etc as required. |
| 88 | S/F 3 pin, 5 Amp ceiling rose on the existing junction Box /wooden block including connection etc as reqd. |
| 89 | S/F brass batten/ Angle holder including connection etc as reqd. |
| 90 | ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required. |
| 91 | S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 92 | ITC exhaust fan upto 450mm sweep:-Installation of exhaust fan upto 450mm, sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc as reqd. |
| 93 | Supply of 48\" dia ceiling fan( crompton/havells fan) |
| 94 | Supply of 12\" dia Khaitan India exhaust fan |
| 95 | Supply of 15/16 watt LED bulb |
| 96 | Earthing with G.I earth pipe 4.5mtr Key & 40mm dia thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as reqd (But without charcoal or coke and salt) |
| 97 | S/L 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode including soldering etc as required |
| 98 | P/F of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate incuding holes etc complete as required. |
| 99 | Reverting sweating and soldering of coper /G.I tape ( with nother copper. G.I tape base of the finial or any toher metalic object) as reqd |
| 100 | Providing and Fixing G.I tape 20 mm x 3 mm thick on parapet of surface of wall for lightning conductor in horizontal run in complete as reqd |
| 101 | Providing and Fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor in vertical run complete as reqd |
| 102 | MV cable laying upto 25sq. Mm in ground -Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25sq. Mm . But not exceeding 120sq, mm direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc as required |
| 103 | Carriage of materials Sand Lead (24+1) Km |
| 104 | Stone Chips lead 10 Km. |
| 105 | Bricks lead (15+1) Km |
| 106 | GST @ 18% |
| 107 | Labour cess @ 1% Please Enable Macros to View BoQ information |
