|
| 1 | Brick masonry work in 1:4 cement and sand mortar using class-150 bricks complete in all respect including all leads,lifts,all cost of material,labour and T&P etc. |
| 2 | Dismanteling existing plaster,including disposal of refuse as directed by Engg.-In-Charge within distance of 60m. |
| 3 | 15mm cement plastering in 1:4 single coat rough side of single or half brick wall for interior plastering in single story building finished with even and smooth strokes. |
| 4 | Distempering two coat of oil bound distemper of approved make of Burger, Jenson & Nicholsen, Shalimar, Asian, Nerolac for after the first coat including supply of all materials labour and T&P etc. required for proper completion of work. |
| 5 | Distempering with dry distemper of approved brand (two coats) over one priming coat of whiting on old surface after throughly brushing the surface free from dropping and other foreign matter including preparing the surface even and sand paper smooth including cost of all materials, labour T&P etc. |
| 6 | Scraping old white or colour wash distemper/cement wash/paint including disposal of refuse as directed by the engineer-in-charge within distance of 60 m. |
| 7 | Painting two coat superior quality synthetic enamel paint approved make on old painted wood or steel work including all cost of material, labour & T&P etc. with proper completion of work. |
| 8 | Dismantling cement concrete or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 meter. |
| 9 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 10 | P/L Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%, conforming to IS 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete. |
| 11 | P/L 6mm china white glazed or of directed colour tiles in wall laid with 1:3 cement & coarse sand mortar, finished with white cement slurry, jointing & polishing etc complete, including supply of all material, labour, T&P for proper completion of work. |
| 12 | Fixing 6mm china white glazed tiles in flooring or in skirting of dado laid with 1:3 cement and approved coarse sand mortar finished with white cement, slurry, jointing and polishing and supply of all materials but including labour and T&P etc. required for proper completion of the work. |
| 13 | Making and fixing Shisham wood jali door shutters 22 mm thick including fixing of fittings (Labour only) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 15 | Providing and fixing second class teak wood 30mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: But hinges and necessary screws shall be paid separately) |
| 16 | Ordinary Jungle clearance in campus of inspection house. |
| 17 | Dry earth filling including manual compaction dressing, lead upto 30 m & lift upto 1.5 m in building and masonry works.(not given in back filling of foundation) |
| 18 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 19 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in- charge. (Old CC paver blocks shall be supplied by the departmentfree of cost). |
| 20 | Providing and laying factory made chamfered edge Cement Concrete block pavement having thickness 80mm as per drawing and technical specification clause 1504 (Exclusive G.S.B.) |
| 21 | Providing and laying water proofing on roof after surface preparation applying DONCRETE A&B / Roof coat-AR / Supercrete-SB(IS:13435,part-), or equivalent (Epoxy Grout) polymer based coating (two pack system) @ 400 gm./Sqm. Second Layer @ 600 gm./Sqm. By brush and protective layer of 20mm thick cement: Coarse sand (1:4) admixed with Concrete Bond-101/ Warrior-W-4 or equivalent polymer (SBR Polymer) based bonding materials one kg. per bag of cement finishing the surface with neat cement and making of (300x300)mm square. the entire treatment will be taken up to 30cm. on parapet wall. |
| 22 | Wiring point for light with 1.5 Sqmm. PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall with 8 SWG G.I. earth continuous wire and piano type switch etc. complete in all-respect. |
| 23 | Wiring point for fan/Fresh air fan (light duty exhaust fan) with 1.5 sqmm. PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe concealed in the wall complete with 8 SWG G.I. earth continuity wire and piano type switch etc. complete in all respects as per PWD Electrical schdule Item No. 133C |
| 24 | S/F factory wired integral street light fitting single piece, powder coated die cast aluminum housing, glaskot pot optics reflector, cast aluminum frame for heat resistant, toughened clear glass cover, multitype ballast and accessories with TREND SETTER switch suitable with 150W, HPSV-T lamp confirming to IP 66 complete in all respect on pole as per PWD electrical schedule Item No. 446(I) Cat –AA. |
| 25 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.CAT-AAA |
| 26 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT-AAA |
| 27 | S/F Power plug with 15A/250V flush type 5 pin universal socket in suitable M.S. box of 175 mm x 100mm x 50mm size with pheonolic laminated Bakelite sheet cover 3 mm thick fixed with brass machine screws & cup washer as per PWD Item no -1139 |
| 28 | P/F Indian type white glazed earthen ware 1st quality ISI marked of approved quality including cost of all material. |
| 29 | P/F 10 Lit. Capacity Low level PVC cistern of standard approved make complete with all accessories and fittings. |
| 30 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 31 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 32 | P/F wash basin with single hole/number of holes for pillar tap with CI or MS brackets painted white including cutting hole & making good the same but excluding fittings. Sze 630×450 mm |
| 33 | P/F pedestal for wash basin complete recessed at the back for reception of pipes and fittings, |
| 34 | P/F stainless steel kitchen sink with C.1. Bracket excluding cost of other fittings. (b) Kitchen sink without drain board size 610×510×200mm. |
| 35 | P/F PVC waste pipe for sink/wash basin with cost of all material, labour, T&P etc complete. |
| 36 | P/F PVC pipe connection for sink, wash basin, cistern, gyger etc. with 2 Nos CP nuts. |
| 37 | P/F 15mm dia CP bib cock complete with all materials. |
| 38 | P/F 15mm nominal size, CP brass pillar cock complete with all materials. |
| 39 | P/F CP brass angle valve, 15 mm nominal dia size for wash basin cistern, Gyger etc. including cost of all material, labour, T&P complete. |
| 40 | P/F CP Jali for Nahani tap 100 mm dia including cost of all materials, |
| 41 | P/F CP brass toilet paper holders including cost of all material, labour, T&P etc. |
| 42 | P/F 100mm size P or S trap for WC or Squatting pan including jointing the trap with the pan & pipe in CM 1:1 (1 part cement: 1 part fine sand). |
| 43 | P/F in position CP brass towel rail complete with brackets including dilling holes in walls and repairing the same in 1:3 CM complete.size 600×20 mm |
| 44 | Fixing CP brass soap dish with CP brass bracket fixed at place with wooden plugs/ plastic sleeves etc with CP brass screws complete. |
| 45 | P/F 100mm dia CP shower rose with 15 mm/20 mm inlet complete. |
| 46 | P/F Mirror of size 950 mm x 450 mm of approved make with teak wood moulded frame and 6 mm thick hardboard back base inclusive of all material, labour, T&P etc. |
| 47 | Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & m brass threaded fittings and fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes Please Enable Macros to View BoQ information |
