|
| 1 | Taking out doors, windows and clerestory windovV shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 2 | Removing white or colour wash by scrapping sand papering and preparing the surface smooth including necessary repaiis to scratches etc. complete |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approvedbrand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. |
| 4 | Finishing with Deluxe Multi surface paint for interiors and exteriors usingPrimer as per manufacturers specifications : Two more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr |
| 5 | Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Matboard (595x595 mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 mm c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm GI wire and anchor fastener at every junctionand also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-incharge. |
| 6 | Providing and fixing at Bamboo Mat board conforming to IS:13958-1994 for partition to frame by buckingstudding with screws etc. complete (Frames, backing or studding to be paid separately) 4 mm thickness |
| 7 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessaryholes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 Litre Capacity |
| 8 | Providing and fixing nominal guage PVC Pipe of approved qualitycompleate with special flang compression type fittings including •enching and re filling etc. External work |
| 9 | 32 mm |
| 10 | 25mm |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mill thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 12 | providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 13 | Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors Wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 14 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied@ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 15 | Providing Corrugated G.S. sheet rooting including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with 0.1. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. .0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 16 | Varnishing with flatting varnish of approved brand and manufacture one or more coatson old work. |
