|
| 1 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. |
| 2 | Taking down only old u/s items such as normal/modular tupe switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully including making good of the disturbed surfaces, all as specified and directed. |
| 3 | Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan/call bell point controlled by one way switch complete all as specified and as directed. Note for item Nos.3 to 6: (i) Cost of cutting of wall, if any, for housing of metal box and also making good the disturbed surfaces are deemed to be included in unit rate (ii) Wire should be used in proper colour code red/yellow/blue for phase, black for neutral & green for earth |
| 4 | Ditto- all as per item No 03 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed. |
| 5 | Ditto- all as per item No 03 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed. |
| 6 | Ditto- all as per item No 03 here in above but with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase,neutral & earth for One 3/5pin 16 Amp Socket outlet on the independent board complete all as specified and as directed. |
| 7 | Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed . |
| 8 | Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed. |
| 9 | Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed.. |
| 10 | Supply and fix switch socket combination 5 Pin 6/16 Amp flush type with complete all as specified and as directed. |
| 11 | Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals all as directed. |
| 12 | Supply and fix bell push, flush type 6 Amps complete all as specified and as directed. |
| 13 | Supply and fix electronic fan regulator stepped (5 step) rotary socket type flush type AC 240 volt complete all as specified and as directed.. |
| 14 | Supply and fix in replacement call bell Ding Dong, AC, 230V single pole all as specified as directed. |
| 15 | Material and labour for sub main wiring with two single core PVC insulated cable with Copper conducter unsheathed cable (FRLS) of size 6.0 sqmm drawn through & including PVC conduit with 6.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable submain wiring complete all as directed. |
| 16 | All as per item No 15 here in above but with Copper conducter unsheathed cable (FRLS) of size 4.0 sqmm complete all as directed. |
| 17 | Supply and fix in replacement powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door)4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline all as specified as directed.(Chase cutting & make good disturb surface is included in unit rate). |
| 18 | All as per item No 17 here in above but for 8 way SPN DB. |
| 19 | All as per item No 17 here in above but for 12 way SPN DB. |
| 20 | Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, \"C\" series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed. |
| 21 | Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, \"C\" series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed |
| 22 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver and integrated tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed. |
| 23 | Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC decorative type with driver integrated tube light connecting including connecting up with three core flexible copper conductor cable of suitable size complete ncluding taking down old unserceable light fitting complete all as specified and as directed. |
| 24 | Supply and fix Modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 25 | Supply and fix modular Socket, 6A -3 pin combined 2 module, complete all as specified and as directed. |
| 26 | Supply and fixr for modular type Fan step regulator, 120W - 2 module complete all as specified and as directed. |
| 27 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. |
| 28 | Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed. |
| 29 | Demolition of brick or stone/boulder masonry, built in cement mortar including all quions,arches,pillers etc but excluding ashler facing dressed stonework and precast concrete articles complete all as specified and directed. |
| 30 | M&L Brickwork with Burnt Clay bricks using with modular bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed |
| 31 | M & L brick work with sub class \"B\" bricks, straight or curved on plan to any radius in half thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 32 | Taking down of cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 33 | M&L for rendering 15mm thick cement plaster in CM 1:4 on fair face of brick wall and even with and including liquid water proofing compound- Dr fixit LW+@ 200ml/50kg of cement as on external surfaces complete all as specified and as directed. |
| 34 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in Cm 1:6 finishing the smooth without using of extra cement and all as specified and directed. |
| 35 | M&l for rendering 5 mm thick in on ceiling concrete surface using mortar 1:3 mixed with and including liquid waterproofing compound- Dr fixit LW+ @ 200ml/50Kg of cement and finished even and smooth without using extra cement all as specified and directed. |
| 36 | Taking up or down 15mm size steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed |
| 37 | Taking up or down 20mm size steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed |
| 38 | Supply and fix Unplasticised PVC pipes 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 39 | Supply and fix Unplasticised PVC pipes 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 40 | S&F in repairs 15mm dia bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed. (Make Prayag/Cera/Jaguar) |
| 41 | S& F in repairs 15mm dia stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both iron pipes all as specified and directed.(Make Prayag/Cera/Jaguar) |
| 42 | S& F in repairs 15mm dia stop valve(angular type) cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both iron pipes with long shunk and cup all as specified and directed.(Make Prayag/Cera/Jaguar) |
| 43 | S&F in repairs to pillar taps 15mm dia fancy type with capstain head, chromium plated screwed down high pressure all as specified and directed.(Make Prayag/Cera/Jaguar) |
| 44 | S&F in repairs of pipe15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed,all as specified and directed.(Make Prayag/Cera/Jaguar) |
| 45 | S&F in repairs for waste coupling 32mm of PTMT ( Half or full threaded ) and suitable for urinals minimum weight 32mm-45 gms, All as specified and directed. |
| 46 | S&F in repairs to Vitreous China wash down water closet pan (pedestal pattern,excluding fixing bolts, flushing cistern and flush pipe)white incl with seat cover complete taking down old seat fixing bolt flush pipe complete all as specified and directed. |
| 47 | S&F in repairs of Plastic water closet seat, Black, closed pattern with flat bottom andmild steel chromium plated or aluminised hinging device all as specified and directed. |
| 48 | S&F in repairs, PVC valveless syphonic action type flushing cistern of 10 Ltrs capacity with all accessories incl PVC connection 15mm dia 45cm long and 32mm dia PVC pipe connecting WC complete all as specified and directed. |
| 49 | S&F in repairs ,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 50 | Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed. |
| 51 | S&F in repairs to 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers with sheet glass assembly consisting of 5.5 mm glass sheet 12mm wide with chromium plated brackets all as specified and directed. |
| 52 | S&F in repairs, brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipes or unions all as specified and directed. |
| 53 | Dismantling of floor or hearth wall tiles including cement mortar bedding but not backing all as specified and directed. |
| 54 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( Square/rectangular) area of each tile exc 0.06Sqm but not exc 0.18 sqm in 1st quality provided as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over cement screed bed 15mm thick in cement mortar 1:4 base complete all as specified and directed. |
| 55 | M&L for glazed and coloured ceramic tiles 350x250x7mm/450x350x7mm thick, finish as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement over the surface of 10mm thick rendering CM 1:4 all as specified and directed. |
| 56 | M&L for light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in Floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over cement screed bed 15mm thick in cement mortar CM1:4 all as specified and directed. |
| 57 | M&L for light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 10mm back coat plastering cement mortar 1:4 all as specified and directed. |
| 58 | Supply and fixing 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n. exc. 0.50 Sqmtr each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed. |
| 59 | M&L Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , treading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed. |
| 60 | M&L Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , treading, oil, greasy spots and applying two coat oil bound distemper complete all as specified and as directed. |
| 61 | M&L for applying of 3 mm thick wall care putty at specified area for smooth finishing all as specified and directed. |
| 62 | M&L for applying two coat of oil bound distemper over coat of primer on new plastered surfaces of wall complete all as specified and directed. |
| 63 | M&L for applying two coat of cement base paint over coat of primer on new plastered surfaces of wall complete all as specified and directed |
| 64 | M&L for applying two coat of oil bound distemper over coat of primer on new plastered surfaces of ceiling complete all as specified and directed |
| 65 | M&L for preparation of old plastered surfaces of ceiling and applying one coat white wash all as specified and directed. |
| 66 | Preparation of old treated surfaces ( Plastered or unplastered) of walls cornices etc brooming down or steel wire brushing scrapping down smoke soot moulds, moss efflorescence salts treating oil and greasy spots etc and applying two coat of lime white wash complete all as specified and directed |
| 67 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all specified and directed. |
| 68 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all specified and directed. |
| 69 | Taking down chowkhat with shutters ( without taking off shutters from the frame) removing to or store n\"exc 1.5sqm each all as directed |
| 70 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 71 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing complete all as specified and directed. |
| 72 | S& F 75 mm size Butt hinges, Medium weight, cold rolled mild steel, and fixed all as specified and directed. |
| 73 | S& F 100mm size Aluminium handles, cast type anodised all as specified and directed |
| 74 | S& F 100mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and directed. |
| 75 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 76 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed. |
| 77 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 orcement concrete 1:2:4 Type B-1 as required in Exc. half brick butn exc Full brick complete all as specified and directed. |
| 78 | S&F MS work (flat iron) 25mm x 3mm thick, in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as directed. |
| 79 | S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutter open rebated and prepared to receive glass,guage etc but divided in to t square with plain,chemfered or rounded, mitred sash bars, any number fitted with cut and mitred beads for securing glass etc,size of member of shutter as specified in SSR part-i section 8 clause 8.24(a) all as specified and directed. |
| 80 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 81 | Taking down shutters of any description Exc 1Sqm and N.Exc 2.00Sqm each all as specified and directed |
| 82 | Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed. |
| 83 | S&F Particle board plywood 18/19 mm thick interior fixed with screw to timber frame including taking down existing one work all as specified. |
| 84 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of enamel paint and over a coat of pink primer all as specified and directed |
| 85 | S& F 100mm size Butt hinges, Medium weight, cold rolled mild steel, and fixed all as specified and directed. |
| 86 | S& F 150mm size Aluminium handles, cast type anodised all as specified and directed |
| 87 | S& F 150 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and directed. |
| 88 | S&F aluminium alloy, anodised sliding door bolt of size 300mm with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed. |
| 89 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 and fixed with pinned tacks or staples complete all as specified and directed. |
| 90 | S&F in repairs ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) |
| 91 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and as directed. |
| 92 | S&F 140mm floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor including sinking in floor for fixing stoppers complete all as specified and directed. |
| 93 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule \"A\" notes for details. |
