|
| 1 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the frames complete all as specified and directed. |
| 2 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frame complete all as specified and directed. |
| 3 | Taking down shutter with frame of any discription n.exc 1.0 sqm each complete all as specified and directed. |
| 4 | S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 5 | S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 6 | M&L for providing PCC 1:3:6 type C-1 (using 20 mm stone aggregate), in cement mortar 1:4 lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates complete all as specified and directed. |
| 7 | S&F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 8 | S&F for 35mm thick 2nd class HW factory made plain, framed, panelled shutter (two panel) with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 9 | S&F for 2nd Class HW glazed and skeleton shutter 35 mm thick, open rebated & prepared to receive glass, gauze, etc. (rebated sash bars) edges of framing plain, chamfered or rounded fittted with cut and mitred beads for securing glass etc size of members of shutters as specifed in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed. |
| 10 | S&F for Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 11 | M&L for Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed. |
| 12 | S&F in repairparticle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination on other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 13 | M&L for 12 mm thickplywood , grade BWR, type BB, inlcuidng 4 mm thick teak wood lipping allround, fixed with screwd to timber frame work as in shutters complete all as specified and directed. |
| 14 | S&F for Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and directed. |
| 15 | S&F 150mm aluminum anodised cast type bow handles complete all as specified and directed. |
| 16 | S&F for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 17 | S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm flap when opened complete all as specified and directed. |
| 18 | S&F for 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 19 | M&L for 2 coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer over 10cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 20 | M&L for 50micron powder coated aluminium ventilator frame with frame of section 100 mm x 44 mm of thickness 1.6 mm shutters of section 32 mm x 15 mm (with and including half portion fixed glazed shutter and rest half portion louvered with glazed shutter) including stainless steel wire mesh, rubber gasket for securing the glass ,5.00 mm thick figured glass, aluminium grill and necessary aluminium mongaries and handles including necessary locking arrangement complete all as specified and directed. |
| 21 | S&F for 50 micron powder coated aluminium sliding windows two track with two sliding shutters with extrusions aluminium of following sections including jointing cleats, glazing clips, rubber packaging, snap beading and other necessary builders hardware as required complete all as specified and directed. (A) FRAME:-(i) Top and side member fortwo track frame of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.784 kg/ mtr), Model No. 20829 of Jindal or equivalent as specified in PS.(ii) Bottom rail of frame for sliding of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.909 kg/ mtr), Model No. 20830 of Jindal or equivalent as specified in PS. |
| 22 | (B) SHUTTER:-(i) Top and bottom rail of sliding shutter of size 40 mm x 18 mm x 1.5 mm (weight 0.547 Kg/ mtr), Model No. 20736 of Jindal or equivalent as specified in PS.(ii) Side of sliding shutter with handle /self locking arrangement, section of size 40 mm x 18 mm x 1.5 mm (weight 0.547kg/ mtr), Model No. 20738 of Jindal or equivalentas specified in PS.(C) Sliding shutter to be provided with 5 mm thick sheet glass complete all as specified and directed.(D) Supply & Fix for 6.5 mm thick aluminium diamond grill with mill finished fixing on wall/wooden chowkhat/ aluminium frame with suitable size of aluminium \"U\" channel and steel chromium plated, screw with rawel plug complete all as specified and directed with following details:- (i) Aperture size of aluminium grill 67 mm x 84 mm. (ii)Cord dimension 7 mm x 5.8 mm. (iii) Plate thickness 2 mm.(E)Supply & Fix for Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with galvanised wire staples/ clip/ aluminium flat, complete all as specified and as directed. |
| 23 | S&F in repair Curtain rod 20mm dia, mild steel, chromium plated with fixing brackets,stops,end tops, rollers etc complete all as specified and directed. |
| 24 | M&L for Preparing surfaces of wood and wood based materials,new or old, of any descriptionand girth, not otherwise described and treated with creosote oil complete all as specified and directed. |
| 25 | Taking down of cement plaster of any description including racking out joints for key scrubing with water etc complete all as specified and directed. |
| 26 | M&L for 15mm thick rendering in cement mortar (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with fair and even without using extra cement ccomplete all as specified and directed. |
| 27 | Supply only integral WPC complete all as specified and directed. |
| 28 | M&L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for 5 mm thick rendering incement mortar (1:3)on fair faces ofconcrete surfaces such assoffits of slabs, in patches n exc 1 sqm each finishing the surfaces fair and even complete all as specified and direccted. |
| 30 | M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion with plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoothoveralkali resistant primer complete all as specified and directed. |
| 31 | M&L for Preparing old plastered surfaces of walls and applying two coats of distemper oil emulsion with plaster of paris putty of 1 mm thickness over and including taking down old treatment and to prepare the surface even and smoothoveralkali resistant primer, complete all as specified and directed. |
| 32 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 33 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of new surafaces complete all as specified and directed. |
| 34 | M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coats exterior emulsion paint 100% acrylic, in camouflage pattern, any tinted , including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified and directed. |
| 35 | M&L for preparation of newly plastered surfaces of walls and applying acrylic based Weather Coat exterior grade emulsion, two coats, in camouflage pattern, any tinted over a coat ofsuitable primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 36 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness(below or above ground level) complete all as specified and directed. |
| 37 | M&L for 75 mm thick, PCC (1:2:4) type B-2 using 40 mm graded stone aggregates as in sub base without using extra cement complete all as specified and directed. |
| 38 | M&L for 75 mm thick, PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in plinth protection/ sub base flooring without using extra cement complete all as specified and directed. |
| 39 | Taking up or down GI tubing 15mm bore including cleaning for refixing ccomplete all as specified and directed. |
| 40 | Taking up or down GI tubing 20mm bore complete all as specified and directed. |
| 41 | Supplying and laying of CPVC pipes16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 42 | Supplying and laying of CPVC pipes16 mm outer dia brass elbow complete all as specified and directed. |
| 43 | Supplying and laying of CPVC pipes16 mm outer dia brass Tee complete all as specified and directed. |
| 44 | Supplying and laying of CPVC pipes16 mm outer dia brass Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 45 | Supplying and laying of CPVC pipes16 mm outer dia brass Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 46 | Supplying and laying of CPVC pipes16 mm outer dia union complete all as specified and directed. |
| 47 | S&F in repair 20 mm bore ballbrassvalve,high pressure with polythene float and fly nut complete,screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 48 | S&F for 20 mm dia GI pipe medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed. |
| 49 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs incl dismantling old one complete all as specified and directed. |
| 50 | M&L for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed. |
| 51 | S&F in repair 600x450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 52 | S&F in repair 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down scrwed for iron piupe or for brass funnel and fixed complete all as specified and directed. |
| 53 | S&F in repairsinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 54 | S&F in repair 15mm angle Stop valves, fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F in repair 15mm Stop valves, fancy type,cast copper alloy with long shank and cup (concealed), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 56 | S&F in repair shower rose CP 125mm fix to iron/CPV pipe 15mm complete all as specified and directed. |
| 57 | S&F in repair brass chromium platedtubular towel rail , 60cm long between flanges complete all as specified and directed. |
| 58 | S&F in repair PVC low level flushing cistern, white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe after dismantling of old unserviceable existing flushing cistern complete all as specified and directed. |
| 59 | S&F in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in cement ,ortar 1:3 including taking down unserviceable wash hand basin and connected items of any description complete all as specified and directed. |
| 60 | S&F in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered \"hot or cold\" with long screwed shank and fly nuts screw for iron pipe complete all as specified and directed. |
| 61 | Dismantling and breaking up drain pipes AC /CI /PVC Pipes set in cement mortar 100mm/75mmbore complete all as specified and directed. |
| 62 | M&L for 75mm PVC (SWR) floor trap, with grating including jointing with solvent cement complete all as specified and directed. |
| 63 | S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls with clamps 110mm bore complete all as specified and directed. |
| 64 | S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls with clamps 75mm bore complete all as specified and directed. |
| 65 | S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 66 | S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 67 | S&F for PVC (SWR) single T equal or unequal with access door 110mm bore complete all as specified and directed. |
| 68 | S&F for PVC (SWR) single T equal or unequal with access door 75mm bore complete all as specified and directed. |
| 69 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 70 | S&F in repair 40mmdia waste pipe for sinks, basins, etc complete all as specified and directed. |
| 71 | S&F for grating doom 100/125 mm dia of PTMT (Minimum weight 5gms) complete all as specified and directed. |
| 72 | S&F in repair vitreous china 580x440 mm,\"ORISSA PATTERN\" with \"P\" or \"S\" trap size squatting pan (Exclusive flushing cistern and flush pipe) incl foot rest complete and provision of lime concrete bedding complete all as specified and directed. |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 74 | M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm screed bed in cement mortar 1:4 complete all as specified and directed. |
| 75 | M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement 1:4 complete all as specified and directed. |
| 76 | S&F for Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and including 15mm screed bed in cement mortar 1:4 complete all as specified and directed. |
| 77 | S&F for glazed ceramic coloured /printed tiles 350x250x 7mm/ 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wallcomplete all as specified and directed. |
| 78 | Demolition of cement concrete(reinforced) any type n. exc 15 cm thickness (below or above ground level) removing debris out side MD land complete all as specified and directed. |
| 79 | M&L for sunken floor treatment as follows as per S. No. (i) to (vii) :- The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated.(i) Demolition ofconcrete of any description and in any position not otherwise specifically provided or in anytype of filling in sunken portion & cleaned the sunken potion incl vertical wall surface complete as directed.(ii) Top of RCC salb in sunken portion including peripheral beams shall be plastered with 15 mm thick cement and sand mortar (1:3) using approved water proofing compund @3% by weight of cement finished even and smooth without using extra cement and curved adequately and allowed to dry. (iii) Two coats of epoxy resin / polymer modified cementaticious coating like brush bond of Fosroc or equivalent both on floor and walls /beams shall be applied as per manufacturer instuctions.(iv)slabs to be given 1:20 slope outward with 25 mm GI pipe spout with 300 mm projection beyond outer surface of wall completeall as specified and directed.(v) After the surface is passed by the Eng- in- charge for water tightness by flooding for 72 hrs the same shall be filled with lean concere (1:4:8) using type B-1 aggregate , up to the required depth . Surface surrounding to WC Pan shall however be of cement concrete as specified here-in-before. |
| 80 | M&L for Mild steel TMT bars 5 mm to 10 mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 81 | Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar complete all as specified and directed. |
| 82 | M&L for Brick work with sub-class `B\" in half brick , straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 83 | M&L for brick work built in cement mortar 1:6 straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and directed. |
| 84 | M&L for Marble work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble over and including 20mm thick screed bed complete all as specified and directed. |
| 85 | M&L for Machine cutkota stone slabflooring 20mm thick over and including 20mm Screed bed in CM 1:6 andjointed with grey cement slurrymixed with pigment to match theshade of the slab including rubbing, nosingand polishing complete all as specified and directed. |
| 86 | M&L for Machine cutkota stone slabflooring 20mm thick in riser of steps, skirting, dado and pillar laid overand including 10mm thick cementscreed and jointed with grey cement slurrymixed with pigment to match theshade of the slab including rubbingand polishingcomplete all as specified and directed. |
| 87 | Removing demolished material upto a distance exceeding 250m but not exceeding 500m including loading/unloading and spreading at the destinaiton if required complete all as specified and directed. |
| 88 | M&L for Hardcore using broken stone/ boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface for plinth protection complete all as specified and directed. |
| 89 | M&L for footpath tiles of size 300 x 300 mm and 8-10mm thick of any colour and laid over 15mm thick screed bed in cement mortar 1:4 and joited with grey cement slurry and joints shall be filled with white cement mixed to match the shade of the tiles complete all as specified and directed. Note : Screed bed to be measured and paid separately. |
| 90 | M&L in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete |
| 91 | M&L in repair 125/110mm PVC (SWR) gully floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 92 | S&F for 110mm bore PVC (SWR) branch piece,double (double Y) equal or unequal with access door complete all as specified and directed. |
| 93 | S&F for 75mm PVC (SWR) Couplers complete all as specified and directed. |
| 94 | S&F for 110mm PVC (SWR) Couplers complete all as specified and directed. |
| 95 | S&F for 75mm PVC (SWR) cowl complete all as specified and directed. |
| 96 | Demoiltion and breaking up100mm dia drain pipes (saltglazed, stoneware, AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 97 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 98 | Returning, filling in, including spreading, leveling, watering and well raming in layers, n.exc 25cm thick complete all as specified and directed. |
| 99 | Removal of surplus soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 100 | S&F for 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type \"B\" in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 101 | M&L for Plain cement Concrete (1:3:6) type C-2bed to 110 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed. |
| 102 | Cuttingintoexistingmanholes forconnecting110mm dia new drains/SWR pipes, making goodto pipe and rendering, cutting outexisting benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 typeB-l smooth finished, and reformingbenching as required complete all as specified and directed. |
| 103 | Cutting holes in brickwalls exc one brick but n.exc two bricks in cement mortar forinserting holdfasts/ SWR pipes andmaking gooddismantled portion incement mortar 1:3 orcement concrete 1:2:4Type B-1 as required complete all as specified and directed. |
| 104 | Demolition brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished material from work site complete all as specified and directed. |
| 105 | M&L forBrickwork with old size bricks,having crushing strength 75Kg/sqcm, locally avaliable, straight or curved on plan excd 6 M mean radius inbuilt in cement and sand mortar 1:4 complete all as specified and directed. |
| 106 | M&L for rendering 15 mm thickon fair faces of brick work or concrete surfaces, in cement and sand mortar 1:4using water proofing compound @ 200 ml per bag of cement or as per manufacturer\"s instructions (WPC measured and paid separately) complete all as specified) top surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 107 | M&L for rendering 15 mm thickon fair faces of brick work or concrete surfaces, in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 108 | Supply only integral water proofing compound ( liquid ) conforming to IS : 2645-2005 complete all as specified and directed. |
| 109 | M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete works complete all as specified and directed. |
| 110 | M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in copings, benching, bed plates, surface channel, drain and like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 111 | Demolition of Cement concrete (reinforced)of any description and in any position not otherwise specifically provided for includingreinforced cutto facilitate demolition complete including removing demolished material from work site complete all as specified and directed. |
| 112 | M&L for precast reinforced cement concrete 1:2:4 type B-1 as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set un cement mortar 1:6 complete all as specified and directed. |
| 113 | M&L for Mild steel deformed or twisted bars ( TMT)8 mm dia and over, cut to length, bent to shape required, hookingends and binding with including mildsteel wire(annealed) notless than0.90 mm dia. or higher ccomplete all as specified and directed. |
| 114 | Taking down carefully copper/aluminum point wiring (light ,fan and power socket etc) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, calling bells etc removing materials for takingcredit and making good matching to the existing colour to the disturbed surface wall/ floors etc complete all as specified and directed. |
| 115 | Taking down the existing unservicable main switch or cut out/ DBs of any type orcapacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed. |
| 116 | Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed. |
| 117 | Taking down carefully ceiling/exhaust fans, sealing cable ends,dismantelling blades removing fan and blades for taking to store and refixing back to its original position and making good matching to the existing colour to the disturbed surface wall/ floors etc complete all as specified and directed. |
| 118 | M&L for point wiring with 1.5 sqmm cable PVC insulated, unsheathed type, copper conductor, multistranded cable (FRLS Type), 1100 Volts grade (red colour cable for phase and black colour cable for neutral) including 1.5 sqmm copper conductor, multistranded cable (FRLS type) 1100 volts grade unsheathed PVC insulated ( green colour cable for earth wire) continuity earth wire connected to common earth dolly to be drawn in and including PVCconduit, medium grade of suitable size including all fittings such as bend, elbow, tee, joint, junction box including cutting chases for concealed conduits/ sunken boxes and making good to disturbed walls,floors with sunk cast pressed steel terminal box made out of MS sheet for mounting of switch, socket,fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed for following:- |
| 119 | Light / bell point controlled by one number one way switch |
| 120 | Light point controlled by one number Two way switch |
| 121 | Ceiling Fan/Exhaust fan point controlled by one number one way switch |
| 122 | 5 Ampsocket point on same board |
| 123 | 5 Amp switch socket point on independent board |
| 124 | All as per item Ser No 117.00 here in before but with 2.5 sqmm PVC insulated, unsheathed cable multistranded FRLS type, copper conductor (for phase & neutral) and 2.5 sqmm (for earth wire with same specification) for 6/16 Amp switch socket point on independent board complete all as specified and directed. |
| 125 | All as per item Ser No 117.00 here in before but with 4.0 sqmm PVC insulated, unsheathed cable multistranded FRLS type, copper conductor (for phase & neutral) and 4.0 sqmm (for earth wire with same specification) for 6/16 Amp switch socket point on independent board complete all as specified and directed. |
| 126 | M&L for concealed sub main wiring with two run of 1.5 sqmm PVC insulated unsheathed FLRS copper conductor single core multi strandedand one run of insulated copper earth wire 1.5 Sqmm drawn through PVC medium grade Conduit complete.(For Bulkhead Light)including all fittings such as bend, elbow, tee, joint, junction box including cutting chases for concealed conduits/ sunken boxes and making good to disturbed walls,floors with sunk cast pressed steel terminal box made out of MS sheet for mounting of switch, socket,fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed.Note :- Copper conductor 3 run of 1.5 sqmm and one run PVC conduit shall be measured as one length. |
| 127 | M&L for concealed sub main wiring with two run of 6.0 sqmm PVC insulated unsheathed FLRS copper conductor single core multi strandedand one run of insulated copper earth wire 6.0 Sqmm drawn through PVC medium grade Conduit complete all as specified and directed.Note :- Copperconductor 3 run of 6 sqmm and one run PVC conduit shall be measured as one length. |
| 128 | S&F for switch 1 way 6 Amps,230 volts, 50 HZ complete all as specified and directed. |
| 129 | S&F for switch 2 way 6 Amps,230 volts, 50 HZ complete all as specified and directed. |
| 130 | S&F for bell push switch 1 way 6 Amps, 230 volts, 50 HZ complete all as specified and directed. |
| 131 | S&F for switch 1 way 16 Amps,230 volts, 50 HZ complete all as specified and directed. |
| 132 | S&F for Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type,230 Volts,50 Hz complete all as specified and directed. |
| 133 | S&F for switch socket combination 2 in1 3pin 6/16 A230 Voltsflush type multi purpose complete all as specified and directed. |
| 134 | S&F for switch socket combination 2 in1 3pin 5 A240 Voltsflush type multi purpose complete all as specified and directed. |
| 135 | S&F for ceiling rose surface type Bakelite 3 terminals complete all as specified and directed. |
| 136 | S&F for stepped type electronic type fan step regulator 240 Volt 120 W complete all as specified and directed. |
| 137 | S&F for calling bell ding dong type AC 230 Volt complete all as specified and directed. |
| 138 | S&F for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 139 | M&Lfor LED Bulb (B-22) of 1 x 9 w fitting properly in Lamp holder complete all as specified and directed. |
| 140 | S&F for inverter type batten LED light fitting of capacity 1X 20 W (or nearest next higher wattage) (4feet), 6500K, wall/ surface mounted,square profile housing and polycarbonate channel including lithium lon battery with charging time 8-10 hours and back up time up to 10 hours decorative type with integrated high efficiency electronic driver and operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and directed. Make :- Havells Cat part no-LHEXASP7IN1W020. |
| 141 | S&F for IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 6500 K, wall /Surface mounted with PC housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more,operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete with all accessories internally prewired and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and directed. Make :- Havells Cat part no-LHEXAZP7PN1W010. |
| 142 | S&F for Decorative wall light fixture made up of polycarbonate suitable for 09 WattLED retrofit of type B-22 base, IP66 grade, with and including 09 watt LED(or nearest next higher wattage) lamp and connecting up with and including PVC insulated3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and directed.Make - Havells , CAT No - LHFOECE1TZ1B014. |
| 143 | S&F in repair of bulk head luminaire environmental friendly , ultra modern,energy saving,surface mounted ,decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 10 watt,230 volts ,50 Hz including lamp,connection wire complete all as specified and directed. |
| 144 | S&F in repair ofsheet metal enclosure, MCB DB, double door, Triple pole & neutral, 4 way, 415 volts, 50 Hz with suitable bus bar, neutral link, earth link complete all as specified and directed. |
| 145 | S&F in repair of sheet metal enclosure, MCB DB, double door, single pole & neutral, 8 way, 230 volts, 50 Hz with suitable bus bar, neutral link, earth link complete all as specified and directed. |
| 146 | S&F for MCB TPN 40 to 100 Amps, 230 volts, C curve complete all as specified and directed. |
| 147 | S&F for MCB SPN 40-63 Amps, 230 volts complete all as specified and directed. |
| 148 | S&F for MCB SP 10 to 32 Amps, 230 volts, C curve complete all as specified and directed. |
| 149 | M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cablecomplete all as specified and directed. Note: Punned thickness of sand shall be measured & paid. |
| 150 | M&L for well burnt sub class \"B\" bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified and directed. |
| 151 | M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing GI tubing upto 50 mm bore complete all as specified and directed. |
| 152 | S&F in replacement GI protection pipe of 40 mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole/ walls with mild steel clamps, bolts, nuts and washers complete all as specified and directed.Note:- Earth work shall be measured and paid separately. |
| 153 | Taking out old serviceable/ unserviceable cable of size 25 Sqmm, 3.5 core of any make/ typefor requisite replacement/ further disposal complete including taking out bricks complete all as specified and directed.Note: Earth work shall be measured & paid separately. |
| 154 | Supply, fixing/ laying, connecting and commissioning LT underground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable with multistranded aluminium conductor,25 sqmm,3.5 core, 1100 Volts grade laid in trenches/ on wall/ poles/ ducts/ pipe including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed.(Note: Earth work shall be measured & paid separately). |
| 155 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x 6.30 mm thick elecrode and 4mm galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire 4mm as earth lead by means ofbolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 20mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. |
| 156 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
