Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-02-2026 | CORRIGENDUM 5 | Date | 03-03-2026 |
| 2 | 14-02-2026 | CORRIGENDUM 4 | Date | 25-02-2026 |
| 3 | 10-02-2026 | CORRIGENDUM 3 | Other | 19-02-2026 |
| 4 | 09-02-2026 | CORRIGENDUM 2 | Date | 19-02-2026 |
| 5 | 03-02-2026 | CORRIGENDUM 1 | Date | 14-02-2026 |
| Sl. No. | Item Description |
| 1 | M&L for Preventive treatment against the danger of carbonation in exposed faces of RCC members :-(i) Cleaning existing surfaces of RCC members and making surface free of loose material, oil, grease etc. by vigorous wire brushing includinglight grit blasting where necessary as recommended by Engr-in-charge.(ii) Further, cleaning using biocide(as recommended by manufacturer) to ensure that surface is free of algae and fungus and no trace of paint (any type) left out. Sand blasting to be done to remove trace of paint.(iii) Cleaned surface to be allowed to dry.(iv) Spray a coat of primer (as recommended by manufacturer)over dry cleaned surface as required prior to final finish. Primer shall be diluted in proposition 2:1 with mineral turpentine. After application, primer shall be allowed to dry for 03 hours or as directed.(v) Apply a coat of neat Aliphatic Acrylic anti-carbonation (ACC) over the primed surface with air / spray gun at nominal rate of 3.5 ltrs per sqm as recommended by manufacturer.(vi) Apply a more coat of Aliphatic Acrylic anti-carbonation (ACC) after 5-6 hours as recommended by manufacturer complete all as specified and directed. (vii) Sprinkle sand cover over surface to receive new. |
| 2 | M&L for followings :-(i) Removing plaster & finishes all around the coloumns, slabs & beams(on all four sidescription of column to full height , three sidescription of beam to entire span & bottom of slab to area as directed)(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved.(The Engr-in-charge may order sand blasting if rust is approved)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed. |
| 3 | M&L for providing rust proof /anti corrosive treatment to bars :-(i) cleaning of all exposed bars (new & old) alround(ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer(iii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating. Superficial area of member to be considered for measurement. |
| 4 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. |
| 5 | M&L for Providing & Pouring Micro concreting M-40 grade :-(i) Dry concrete substrate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed.including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note :Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.Note : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item. |
| 6 | M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 7 | M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified . |
| 8 | S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, includingcranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. |
| 9 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 10 | Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey and directedcomplete all as specified. |
| 11 | M&L for form work to chajjas and similar items including edges thick finished rough all as speified and directed. |
| 12 | M&L for RCC 1 : 1.5 : 3 type B1 using 20mm graded stone agg as incooking platform and similar work complete all as specified |
| 13 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 14 | M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 15 | S&F Factory made modular FRP Chajjas with MS Flats 40 x 2mm,minimum 06 Nos Hold and Fastner including cutting/chesling of required thickness (As per manufacturer instruction) of wall or as per direction of Engr-in-Charge for upto 4th storey of buildingand making good disturb portion including demolition of reinforcement cement concrete chajjas as suitable method and as per direction of Engr-in-Charge,all as specified and directed.Drawing for the complete Job is enclosed and as per sample kept on custody of AGE B/R-I of GE (South) office. |
| 16 | Taking down cementplaster, any description, on roof slab, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 17 | M & L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3)on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed (Water proofing compound shall be measured and paid seperately). |
| 18 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints. |
| 19 | M&L for preparation of new surface of APP membrane and applying two coats of aluminium paint at surfaces of any description, over 10cm in width or girth,not otherwise described |
| 20 | Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specially provided for. |
| 21 | M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete. |
| 22 | Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed |
| 23 | M & L for Granite (of any type) work, 18-19 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 24 | M&L for machine cut kota stone slab flooring, and (one Pieces) as in steps (Treads), 20-22mm thick over cement screed bed 20mm thick with CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 25 | All as per item No 24 butof riser of step, dado skirting etc |
| 26 | Rounding to edges of stone slabs one edge, such as in steps cooking platefom,and other similar situations complete all as specified and as directed |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises |
| 28 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:3) with adhesive type - II (wall)thickness as per manufacturing instructions complete all as specified and as directed. |
| 29 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 with adhesive type - IIthickness as per manufacturing instructions (floor) complete all as specified and directed. |
| 30 | S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. fixing with tiles adhesive type II thickness as per manufacturing instructions set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 31 | All as per item No 30 here in before but as in skirting laid over and including 10mm thickbacking coat ofcement mortar (1:3), with adhesive type - II (wall)thickness as per manufacturing instructions complete all as specified and directed. |
| 32 | S&F in repair Vitreous China, pedestal pattern (EWC) wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pipe & drain pipe (or out going pipe) and to flushing pipe, anti-syphonage pipe, \"P\" or \"S\" trapetc complete all as specified. |
| 33 | S&F in repair plastic water closet seat, white, closed pattern ( seat & cover for Pedestal pattern EWC) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified. |
| 34 | Demolition of cement concrete in above ground floors exc 15cm thick above ground floors. |
| 35 | M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm. and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours all as directed. |
| 36 | M&L for Dampness/Moisture/Seepage Intrusion Assessment through inspection and Thermal Imaging technology of 01 Block of ORs Married Accommodation (16 Nos Qtr) and 16 Nos Scooter Shed, (Floor Area = 596.00 Sqm, and Pinth Area of = 927.00 Sqm) including the periphery and Plinth protection area, along with stepwise solution recommendations through report. The Inspection job is to be carried out at least two times before commencement of work and after completion of work physically. The company shall also provide a room-wise checklist of activities to be carried out for arresting the issue observed, so that proper management of activity can be done during execution.Note : - Tri-Party agreement is also to be done between the Company, Contractor and theGE (South) for carrying out the ibid work. |
| 37 | M&L for 10 mm thickcement plaster on brick/ concrete surface in CM 1:3, finished even and fair surface with outusing extra cement but mixing water proofing compound at the rate of 2% of cement by weight (WPC shall be paid separately). |
| 38 | M&L Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified. |
| 39 | M&L 75 mm thick PCC type D2 (1:4:8)using 40 mm graded stone aggregate as in sub base offlooring. |
| 40 | M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors finished rough. |
| 41 | Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc all as specified and dircted. |
| 42 | Supply and fixed PVC low level white flushing cistern valveless symphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified. |
| 43 | S & F 15 mm dia 600mm long PVC connectionswith brass check nut complete |
| 44 | S&F in repair vitreous China wash hand basin (pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste PTMT pipe & waste coupling 32 mm dia including all necessary fitting and fixtures complete all as specified |
| 45 | S&F in repairs 15 mm dia Brass CP mixer 2 in 1 WHB for mixing hot & cold water screwed down for iron pipe and fixed |
| 46 | S&F in repairs 15 mm dia Brass CP mixer 3 in 1 WHB for mixing hot & cold water screwed down for iron pipe and fixed |
| 47 | S&F in repairs 15 mm dia Brass CP mixer 2 in 1 Sink for mixing hot & cold water screwed down for iron pipe and fixed |
| 48 | S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed all as specified . |
| 49 | S & F in repairs brass chromium plated tubular towel rail, 20 mm dia D type , 60 cm long between flanges all as specified and directed. |
| 50 | S&F towel ring as specified and as directed |
| 51 | S&F elegent mirror PVC cabinet (PTMT alloy) complete all as specified. |
| 52 | S&F in repair PVC waste pipe 32/40 mm bore, 65 cm long for sink etc complete. |
| 53 | S&F looking mirror of size 600mmx450mm bevelled edge selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 54 | S & F in repairs Chromium plated brass overhead shower rose 125mm with arm complete all as specified and directed. |
| 55 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 56 | S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 57 | S&F 2-in-1 bib tab fancy type, chromium plated brass, 15mm, complete all as directed. |
| 58 | S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F Glass shelf assembly 5.5mm thick, 600 mm long 120mm wide with cp railingcomplete all as specified and directed. |
| 60 | S&F stainless steel plate rack overall size (31X30X10 inch) fixed with steel screws with wooden gutties and thickness should not be less than 0.8 mm thick complete all as specified and as directed. |
| 61 | S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 495x420mm with bowl size410x330x160mm complete all as specified and directed. |
| 62 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed. |
| 63 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed. |
| 64 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 65 | S&F 20mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 66 | S&F 25mm outer dia CPVC pipes SDR 11 withand including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 67 | S&F 20mm outer dia CPVC Union completeall as specified and directed. |
| 68 | S&F 25mm outer dia CPVC Union complete all as specified and directed. |
| 69 | S&F 25mm outer dia CPVC Tank Adaptor complete all as specified and directed. |
| 70 | S&F 20mm outer dia CPVC Tank Adaptor complete all as specified and directed. |
| 71 | S&F25mm outer dia CPVCball valve/gate valve complete all as specified and directed |
| 72 | S&F20mm outer dia CPVCball valve/gate valve complete all as specified and directed |
| 73 | S&F20mm outer dia CPVC Brass Elbow complete all as specified and directed. |
| 74 | S&F20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 75 | S&F25mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 76 | S&F20 mm outer dia CPVC Brass Tee complete all as specified and directed |
| 77 | M&L for rotational moulded polyethylene water storage tanks white colour 750 lts capacity, fourth layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified. |
| 78 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 min depth for manholes & sewage lines and getting out in soft/loose soil. |
| 79 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. |
| 80 | Removal of excavated surplus soilto a distance not exc 50 metre at a level not exc 1.5m above or below the starting point. complete all as specified and directed. |
| 81 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed. |
| 82 | S & F CI pipe in any length with or without ears, with cement joints, laid in trenches or floors of 100 mm dia sand cast pipe (GT to First MH)complete all as specified and directed. |
| 83 | M&L for plain cement concrete (1:3:6) type C-2(using 40mm graded stone aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides ofpipes after they are laid andtested. complete all as specified and directed. |
| 84 | Demolition and breaking up bath toilet and kitchen sewage vertical pipe and (CI,AC etc) 75/110 mm set in any cement mortar of any diameter incl bends. |
| 85 | S/F PVC (SWR) 75mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete. |
| 86 | S&F for PVC (SWR) bends any radius, 110 mm bore complete. |
| 87 | S&F for PVC (SWR) bends any radius, 75 mm bore complete. |
| 88 | S&F for 110 PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 89 | S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 90 | S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified and as directed. |
| 91 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, of 110 mm dia complete all as specified and directed. |
| 92 | S&F in repairs PVC (SWR) 110 mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears including clamp as rqd. |
| 93 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete. |
| 94 | M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete. |
| 95 | M&L for 75 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) on floor surface finished even and smooth without using extra cement complete all as spd & directed. |
| 96 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 97 | M & L ready mix plaster (Self curing) 10 mm thick on internalsurfaces complete all as specified and directed. |
| 98 | M & L ready mix plaster (Self curing) 15 mm thick on external surfaces complete all as specified and directed. |
| 99 | M&L for cement plaster 15 mm thick in CM 1:6 on brick or concrete surfaces finished even smooth without extra cement mixed with by adding permeability reducing polymer @ 250 gms/sqm (6%) by weight of cementious content at time fixing with water as per manufacturer\"s recommmended incl all levilling the surface, curing etc. complete all as specified.Note :- Rates for water proofing compund/polymer deemed to be in the above rates. |
| 100 | M&L for providing and applying a bond coat of latex : water : cement - 1:4:6 consumption @ 100 gms/Sqm on the brick wall surface by brush as per manufacturer\"s recommendations incl curing complete all as specified. |
| 101 | Supply only liquid water proofing compound all as specified and directed |
| 102 | M & L ready mix plaster (Self curing) 5 mm thick on RCC members and RCC ceiling surfaces complete all as specified and directed. |
| 103 | M&L preparation of new plaster surfaces of wall and applying water proof wall care putty 1 mm thickness over plaster surfaces to prepare the surfaces even and smooth and finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer @ applied @ 2.20 Kg/10Sqm) complete all as specified as directed by Engr-in-charge. |
| 104 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etcand providing and applying 1 mm thickness water proof putty over plastered surfaces to prepare the surface even and smooth and finishing walls with acrylic smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer @ applied @ 2.20 Kg/10Sqm) complete all as specified as directed by Engr-in-charge. |
| 105 | M&L for preparation of new surfaces (Plastered or unplastered) of wall and applying two coat of oil bound distemper over 1-1.5 mm thick wall care putty on plastered surfaces preparatory to distempering complete all as specified and directed. |
| 106 | M&L for old decorated surfaces plastered or unplastred surfaces of walls and complete removal of existing treatment by rubbing brooming down washing with water etc applying two coat of oil bound distemper over 1-1.5 mm thick wall care putty on plastered surfaces preparatory to distempering complete all as specified and directed.on wall complete all as specified. |
| 107 | M&L for preparation of new surfaces (Plastered or unplastered) of ceiling and applying two coats of oil bound distemper over 1-1.5 mm thick putty on plastered surfaces preparatory to distempering complete all as specified complete all as specified. |
| 108 | M&L complete removal of existing treamnet for preparation of old surfaces (Plastered or unplastered) of ceiling and applying two coats of oil bound distemper over 1 -1.5 mm thick wall care putty complete all as specified. |
| 109 | Demolition of brick workbuilt in cement or cement lime mortar complete all as specified and directed. |
| 110 | M&L for old size brick work in cement mortar (1:6) using sub class \"B\" bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified. |
| 111 | Taking down chowkats or frameswith shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete. |
| 112 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete. |
| 113 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed. |
| 114 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge..(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 115 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick including PVC leapping all around the door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 0.8 mm thick PVC strips all around, fixed to factory manufactured WPC shutter to ensure the colour of strip as per frame and shutter, complete all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 116 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER including PVC leapping all around the doorconsisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS moquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). including 0.8 mm thick PVC strips all around, fixed to factory manufactured WPC shutter to ensure the colour of strip as per frame and shutter. The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 117 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thickincluding PVC leapping all around the doorcomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge, including 0.8 mm thick PVC strips all around, fixed to factory manufactured WPC shutter to ensure the colour of strip as per frame and shutter (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 118 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 119 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62 mm x44.45 mm x1.5 mmthick including aluminum anodized “D\" handle, hinges, peg stays, tower bolts, etc includingjointing cleats for fixing builder\"s hardware fittings & 4 mm thick selected quality frosted and plain glass including necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 120 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc includingjointing cleats for fixing builder\"s hardware fittings & stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesincluding necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 121 | S&F fixed type fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, including aluminum anodized “D\" handle, hinges, peg stays, tower bolts, etc includingjointing cleats for fixing builder\"s hardware fittings & 4 mm thick selected quality frosted and plain glass including necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 122 | M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mmthickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 123 | S & F in repairs mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as spd. |
| 124 | S&F 100mm sizebutt hinges stainless steel of AISI 304 complete all as specified and directed. |
| 125 | S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed. |
| 126 | S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all as specified and directed. |
| 127 | S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed. |
| 128 | S&F brass magic eye for panelled/flush shutter 35mm thick complete all asspecified and directed. |
| 129 | M&L for 18 mm thick wood plastic composites (WPC) board for shutters, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE.(b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.(c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same. |
| 130 | M&L for 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE.(b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.(c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall be included for the same. |
| 131 | S&F of Stainless steelauto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 132 | S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 133 | S&F in repairs brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. |
| 134 | S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws. |
| 135 | S&F SS tower bolt size 125mm complete. |
| 136 | S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed. |
| 137 | S&F, 25 mm dia SS curtain rods (minimum 1 mm thick sheet) fency type, including SS bracket and SS side bulb decorative type complete for doors and windows as required complete all as specified. |
| 138 | Taking down carefully the old unserviceable copper/alluminiumpoint wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, pendants, sockets, regulators, bell etc.and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and directed. |
| 139 | M&L for following point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in& including concealed rigid PVC conduit and includingreplacement of existing sunkenterminal boxes with modular sunken terminal box2mm thick of required size and modular white cover plate with all accessories including 1.5 Sqmmstranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surfacecomplete all as specified and directed . Note :- At roof slab conduit wiring will be done through New PVC rigid surface conduit . |
| 140 | (a)One light /fan/Bell point/security light controlled by one way switch |
| 141 | (b) One 3 pin socket outlet 5 amps on same board |
| 142 | (c)One 3 pin socket outlet 5 amps pointon independent board |
| 143 | M&L forpoint wiring for one 3 pin socketoutlet, 15 amps on independent boardwith stranded copper conductor 2.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed rigid PVC conduit and including replacement of existing sunkenterminal boxes with modular sunken terminal box2mm thick of required size and modular white cover plate with all accessories including 2.5 Sqmmstranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surfacecomplete all as specified and directed. |
| 144 | M&L forpoint wiring for one 3 pin socketoutlet, 20 amps on independent boardwith stranded copper conductor 4.0 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in & including concealed rigid PVC conduit and includingmodular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 4.0 Sqmmstranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surfacecomplete all as specified and directed .. |
| 145 | S&Fof Switch modular type, 1Module, 6 Amps, one way complete all as specified and directed . |
| 146 | S&F of Socket outlet modular type 2M, 3 pin,6 Amp complete all as specified and directed . |
| 147 | S&F Modular AC/Geyser box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement, complete all as specified and directed. |
| 148 | S&F of Switch modular type 1M, 16 Ampwith red indication light complete all as specified and directed .Notes :- One power point point wiring shall be provided on one circuit of one point only. |
| 149 | S&F in Socket outlet modular type 2M, 3 pin,16 Amp complete all as specified and directed . |
| 150 | S&F of electric bell ding dong AC, 230 volts single phase complete all as specified and directed by Engr -in-Charge. |
| 151 | S&F of Bell push modular type 1M 5/6 Ampcomplete all as specified and directed . |
| 152 | S&F in replacement of Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated complete all as speficied and directed by Engr-in-Charge. |
| 153 | S&Fin replacement of Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorativePVC extruded T5 LED battern -integrated type complete all as speficied and directed by Engr-in-Charge. |
| 154 | S&Fin replacement of battenholder PVC insulated body complete all as specified and directed . |
| 155 | S&Fin replacement of LED lamp 12 Watt LED Re-charable Bulb complete all as specified and directed. |
| 156 | S&Fin replacement of Electronic fan regulator, modular type complete all as specified and directed. |
| 157 | Taking down of ceiling fan and keeping in safe custody and refixing it back after completion of B/R repair work with running condition without any extra cost complete all as specified and directed at site. |
| 158 | Supply, Installation, testing and commissioning 1200mm sweep BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade , 30 cm long down rod, 2 Nos canopies, shackle kit, safety rope, copper winding , power factor not less than 0.9, service value (CMM/W) minimun 6.85, Air delivery not less than 220 CMM , 350 RPM (tolerance as per IS:374-2019), THD less than 10% with remote control for speed control and all remaining accessories includingsafety pin, nuts, bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V,50Hz, single phase, AC supply complete all as specified and as directed\". |
| 159 | M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4\" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and directed by Engr-in-Charge. Note :The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan. |
| 160 | S&F of metalbody exhaust fan 300 mm sweep, 230 Volts with decorative iron louvers with GI wire mesh on the hole and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan complete all as specified and directed. |
| 161 | Taking down of Exhaust fan and keeping the same in safe custody for refixing it back after B/R repair work complete with louvers flap including all fixing item like fastner/bolt etc completed all as specified and and directed. |
| 162 | S&Fin replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed. |
| 163 | S&F in replacement ofLED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITEincluding all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed. |
| 164 | S&Fin replacement of polycarbonate ceiling rose surfacesminimum size 65x50mm with two/ three terminalscomplete all as specified and directed . |
| 165 | Supply & fixing of water storage heater, 5 star, Glass lined enamel coated , copper tank, including heating element ,Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure(Geyser) of capacity 25 litre, , AC, electric, 230 volt, complete , 3 core lead,including PRCD Plug top, safety valve,including electric and water connection and making good to disturbed surfaceincluding taking down existing water storage heater complete all as specified and directed. |
| 166 | S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 167 | Supply & Fixing in replacement of sheet metal enclosure V TPN 4 way MCCB 125A, 4P, Double door DB, IP-43,bus bar, neutral link earth bar, gasket and din railcomplete all as specified and directed. |
| 168 | Supply & Fixingin replacement of on distribution boardMCCB 125 Amps, 4 Pole, 415 Volts with 16 kA including electrical connection with bus bar or incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed . |
| 169 | Supply and fixin replacement of MCB DB SPN 12 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed . |
| 170 | Supply and fix of MCB DB SPN 4 Way with metal double door, (IP 53 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed . |
| 171 | M&L in replacement MCB SPN \"B\" curve63 Amps 240 Volts , 10 KA complete all as specified and directed |
| 172 | M&L in replacement MCB SP \"B\" curve 06 to 32 Amps 240 Volts complete all as specified and directed . |
| 173 | M&L in replacement MCB SP \"B\" curve 40 Amps 240 Volts complete all as specified and directed . |
| 174 | S&F in replacement of LED Building security light fitting 40 Watt including fabrication of GI bracket25mm diamedium grade for 1 Mtr suitable for fixing of LED light fitting duly fixed with clamps, nut, bolts, & washers etc. and all as directed. |
| 175 | M&L for Earthing complete withgalvanized steel earth plate 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m belownormal groundlevel, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wirefrom earth electrode, supply and laying charcoaldust, common salt, PCC (1:2:4)type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4)type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars@75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for wateringcomplete all asshown in drg and connected to earth test point including testing complete all as specified & directed. |
| 176 | Taking down unserviceable sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and directed. |
| 177 | M&L for sub main wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn in & including new PVC rigid concealed conduitcomplete all as specified and directed .Note :- (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour.(ii) Two runs of cable forphase & neutral , one run of cable for earth & one run of PVC conduit will be measured and paid as one unit length. (iii) The rates are inclusive of Cutting / chasing and making good to disturbed surface with cement mortar 1: 3 and same surface finishes with the adjoining surface of disturbed area . |
| 178 | Supply ,laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 50 sqmm ,3.5 core on wall and trenches complete all as specified and directed. |
| 179 | M & L for excavation of trench not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth forlaying cable etc and getting out in soft/loose soil complete all as specified and directed. |
| 180 | Supply and laying Double Wall Corrugated (DWC Pipe in excavation of tranched of 100mm size including all connecting necessary items complete all as specified and directed. |
| 181 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exe 25 cm complete all as specified and directed. |
| 182 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 183 | Supplying and laying including taking out G.I. tubing light grade for encasing lt cables for mechanical protection , laid under plinth/ floors/ roads/ paths/ culverts or fixed on walls or concealed in walls or along the steel poles incl bends/clamps and all accessories complete all as specified size of 40 mm bore. |
| 184 | Taking downElectric/Electronic KWH meter and refixing it back after Submain wiring and connecting up complete. |
| 185 | S&F in replacement Sheet metal enclosure of size 350 x300 x 150 mm suitable for mounting Single phase electric meter fabricated from2mm thick CRCA sheet with anti corrosive dust and vermin proof. Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed. |
| 186 | Supply and fixing of PVC conduit medium grade of size 15mm TV conection and socket telephon socket complete all as specified and directed by engr in charge |
| 187 | Supply anf fixing TV Co-axial socket 1 module all as cspecified and directed by engr in charge |
| 188 | Supply and fixing flush metal box 1 module all as specified and directed by engr in charge |
| 189 | Supply and fixing white cover plate with frame 1 module all as specified and directed by engr in charge |
| 190 | S&F in replacementExhaustfan MS Louvers upto 300 mm Size complete all as specified and as directed. |
| 191 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified. |
| 192 | M&L broken stone boulder hard core broken to gauge not exc 63 mm all as specified and directed. |
| 193 | M&L 75 mm thick PCC type D2 (1:4:8)using 40 mm graded stone aggregate as in sub base offlooring. |
| 194 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed. |
| 195 | Removing excavated soils exc. 500m andand n. ecx 500 mtrdepositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 196 | M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in edging of path area or mud stops, rounded or chamfered including necessary form work complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
