|
| 1 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover filletscomplete all as specified and directed. |
| 2 | M&L for 4mm E boards 600x600 mmprepainted fibre boards ceiling designer/decorative type with designs as approved, fixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 3 | S&F Anodised Aluminiumframe work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed . |
| 4 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital,AC Sheets or similar pattern as in roof coverings completed all as specified and directed. |
| 5 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 6 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 7 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each complete all as specified and directed. |
| 8 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 9 | S & F Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 10 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 11 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed. |
| 12 | S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc devided into squares with plain chamfered or rounded, mitred and rebatedsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed. |
| 13 | S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed. |
| 14 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators and partition plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 15 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 16 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 17 | S&F 12 mm thick block boardsgrade 1 quality exterior grade , commercial typefixed with screws to timber frame complete all as specified and directed.. |
| 18 | S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed |
| 19 | S&Fin repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & over head shower) complete all as specified and directed. |
| 20 | S & F in repair Brass CP WHB mixer for mixinghot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 21 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M&L for Non Skidjoint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM(1:6). complete all as specified and directed. |
| 24 | All as per Item no here - in - above but in vertical surfaces such as skirting / dado laid over and incl a backing coat of 10mm thick CM 1:4 |
| 25 | M&L for Non Skidjoint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM(1:6). complete all as specified and directed. |
| 26 | M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7mm/300x600x7mm thick setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour over 10mm thick backing coatin CM 1:4 complete as specified and directed |
| 27 | S&F inVitreous China Wash Hand Basins size 550 x 400 mm with pedestal including cutting or pinning in ends of brackets or erecting incl 32 mm dia waste pipe complete all as specified and directed. |
| 28 | S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC flushing cistern 10 liters low level,PVC pipe connection suitable to joint flushing cistern to water closet fixed on \"P\" or \"S\" trap, lime concrete bedding complete all as specified and directed. |
| 29 | S & F in repair CP Brass Chromium plated shower roses 125 mm sizewith or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 30 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and directed. |
| 31 | S & F Stainless steel kitchen plate rack of size 31\"\" X 30 \"\" X 10\"\" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and directed. |
| 32 | S & F in repair corner glass shelf with bracket complete all as specified . |
| 33 | S & F in repair Brass CP sink mixer with swinging provmfor mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 34 | S & F Brass tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and directed. |
| 35 | S&F of Brackets decorative ( Latto ) for 20 mm dia curtain rails complete all as specified and directed. |
| 36 | S & F Grating doom 100 mm dia PTMT ( Minium weight 25 gms ) complete all as specified and directed. |
| 37 | S & F (20 mm Curtain rail ) Harrison rails , aluminium anodised alloy , with fixing brackets , stops , rollars etc 20 mm dia complete all as specified and as directed . |
| 38 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 39 | Material & Labour for applying Two or more coats (over 1 mm thickwall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New or old surfaces. on New or previously untreated surface all as specified and directed . |
| 40 | M&L for preparation of old wall surfaceand applying two finishing coat of oil bound distempering over 1mm of wall care puttyand one coat of wall primer and complete all as specified and directed. |
| 41 | Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connections for 15 mm bore complete all as specified and directed. |
| 43 | S & F G . I pipe 15 mm bore tubing medium graded galvanised with all fitting fixed to wall , ceiling and laid in floor complete all as specified and directed. |
| 44 | S & F G . I pipe 20 mm bore tubing medium graded galvanised with all fitting fixed to wall , ceiling and laid in floor complete all as specified and directed. |
| 45 | S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 46 | S&F Extruded Aluminium, anodised, handles of size 100mm complete all as specified and directed. |
| 47 | S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed. |
| 48 | S&F 300mm long aliminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts ans sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 49 | Demolition of concrete of any description in any postion not not otherwise specifically provided for complete all as specified and directed. |
| 50 | Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete set in cm) complete all as specified and directed. |
| 51 | M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counterfixed over and including 15mm thick screedbed CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as specified and directed. |
| 52 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete |
| 53 | S & F 18/19 mm thick Block board , grade 2 quality , interior grade commercial type , fixed with screw to timber frame workcomplete all as specified and as directed. |
| 54 | S&F 0.90 mm thickdecorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 55 | S & F 12 mm thick Block board , grade 2 quality , interior grade commercial type , fixed with screw to timber frame workcomplete all as specified and as directed. |
| 56 | S&FContinuous (Piano) hinges, mild steel , bright finish or electrogalvanised , width of flaps 30 mm (when open) complete all as specified and directed. |
| 57 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed |
| 58 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 59 | S & F Rotational moulded polyethylene water storage tanks 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 60 | S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor complete all as specified and directed. |
| 61 | S & F PVC (SWR ) 75 mm bore vent cowel complete all as specified and directed. |
| 62 | S & F PVC (SWR ) 75 mm bore bends any radius with access door complete all as specified and directed. |
| 63 | S&FPVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed. |
| 64 | S & F PVC (SWR ) pipes 75 mm bore single socketed , in any length with ribber ring joints , laid in trenches or in floor complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) junction single, (Single T) provided with access door, any radius, 110 mm bore complete all as specified and directed. |
| 66 | S&F in repair PVC (SWR) branch piece, single, (Single Y), any radius, 110 mm bore complete all as specified and directed. |
| 67 | S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed. |
| 68 | S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed. |
| 69 | Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site complete all as specified and directed. |
| 70 | M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smoothcomplete all as specified and as directed. |
| 71 | M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 72 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 73 | M / Lprecast cement concrete block massonry with solid blocks nexc 10 cm in width and setting in CM 1:4 type C1 1:3 :6 (20mm graded aggregate ) complete all as specified and directed. |
| 74 | M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate)complete all as specified and directed. |
| 75 | M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggr ), 75 mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc.2.00 complete all as specified and directed. |
| 76 | S&F 20mm dia Gun metal gate valve class I (ISI) marked with iron wheel head , screwed both ends for iron pipe , suitable for following bore of pipe including taking down old exesting unservisable gate valve complete all as specified and directed |
| 77 | M&L cement concrete type C2 1:3:6 in surface channels and drains (40 mm graded aggregate ) complete all as specified and as directed. |
| 78 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed. |
| 79 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including APP membrane completeall as specified and as directed. |
| 80 | M&L For PCC (1:2:4) type B1 ( 20mm graded stone aggregate) as in roof kerbs ,sloping padding in roof slab or mud stops rounded or chameferd on edges completed all as specified and directed. |
| 81 | M&L for 10 mm rendering on roof top /padding in Cement mortar (1:4) finished the surface even and smooth without using extra cement and mixed with WPC @ 3% by weight of cement etc complete all as specified and as directed |
| 82 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @1.2 kg/sqm including cleaning surfaces etc complete all as specified and as directed |
| 83 | Supply only integral water proofing compound |
| 84 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric ( wt not less than 150 gms/sqm) laid on primed surface by forced application @ 0.25 Kg/sqm complete all as specifed and as directed |
| 85 | S & F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and no pigments complete all as specifed and as directed |
| 86 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified. |
| 87 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered complete all as specified and directed. |
| 88 | M&L for rendering 15mm thick on fair faces oflathing wallin CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for rendering15m thick on fair faces of lathing wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 90 | M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and directed. |
| 91 | M & L for new surfacesof wall and applying two coat of oil bound distemperover a wall of primer complete all as specified and directed. |
| 92 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 93 | M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified and directed |
| 94 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated withTwo coats ofCreosote complete all as specified and directed. |
| 95 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering or in eve board including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 96 | M&L for MS framed work as in grills grating, etc with ends of bars shouldered and/ or riveted or forged x spikes, framed guard bars beraed iron doors, ladders framed balusters work ways railing, frame work for water tanks and sililar work conforming to F.e 290 Gde-E-165 complete all as specified and directed. |
| 97 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. |
| 98 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 99 | Complete removal of existing wall old treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat complete all as specified and directed. |
| 100 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate as in subfloor complete all as specified and directed |
| 101 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 102 | M & L for Machine cut Kota stone slab 20-25mm thickin riser of steps, skirting, dadoand pillar laid over cementscreed and jointed with andincluding 10mm thickRendering in CM 1:4 complete all as specified and directed. |
| 103 | Dismantling post or strut (Wood, steel, RCC) any section incl taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, complete all as specified and directed |
| 104 | Dismantling barbed wire fencing of any description, size, spacing, all as directed. |
| 105 | Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed. |
| 106 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates, in foundation filling and mass concrete. |
| 107 | S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 complete all as specified and as directed |
| 108 | Supply only galvanised steel chain link fencing, any size and type as approved by GE. |
| 109 | Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified and directed. |
| 110 | M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) as in stiffner in chain link fencing as wind tie all as specified and directed. |
| 111 | M&L for Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed. |
| 112 | M&L for Preparation of new or previously untreated steelsurfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.. |
| 113 | M&L for Rough excavation in hard and dense soil not exceeding 1.5 m deep and getting out completed all as specifed and directed. |
| 114 | M&L for Hard core for broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed |
| 115 | M&L for providing 100 mm thick cement concrete1:2:4 type B1 (20 mm graded aggregate) as in hard standing Complete all as specified and directed. |
| 116 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board planned one side with butt joint complete all as specified and directed. |
| 117 | S&F forPVC (SWR) pipes (half round of 150 mmwith rounded edges) as eaves gutters incluing fixing asscessories as clip/cleats/rubber ring joints with regular interval of 2 mtr, single socketed complete all as specified and directed. |
| 118 | S&F for160 mm PVC (SWR) pipes single socketedin any length with rubber ring joints fix in eaves gutter as vertical complete all as specified and directed. |
| 119 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 120 | M&L 75mm PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 121 | M & L Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade complete all as specified and directed. |
| 122 | M & Lsand filling under floors or in foundations including watering and consolidation complete all as specified and directed.. |
| 123 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 124 | Excavation in trenches n,exc 1.5m wide and n,exc 1.5m depth for foundation, etc, n exc 10 sqm on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed. |
| 125 | Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick in soils complete all as specified. |
| 126 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified. |
| 127 | M&L forPCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and directed. |
| 128 | M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 129 | S&F steel work as in tubular , rafters, purlins, posts and similar work(round/square/rectangular shape of pipes as approved by Engr-in-charge ) trusses including posts, special shaped washers, gusset plates etc complete using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed. |
| 130 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe comlete all as spd and directed. |
| 131 | S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade ofzinc coating 275 andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 132 | M&L for rendering15mm (cement plaster 1:6) thick on fair face of brick-work or concrete surfaces finshed even and smooth w/o using extra cement complete all as specified and directed. |
| 133 | M&L for preparation ofnew plastered/concrete surfaces of walls and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and as directed. |
| 134 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 135 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked,including 20 mm dia concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitablesteel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light/Fan point controlled by one switch. |
| 136 | Description all as per Srl item No. 2 here in before but for one bell point controled by one bell push . |
| 137 | Description all as per Srl item No. 2here in before but for one light point controlled by two way switch. |
| 138 | Description all as per Srl item No.2 here in before but for socket outletpoint 5 Amp on Independent board. |
| 139 | Description all as per Srl item No.2 here in before but for socket outlet point 5 Amp on same board. |
| 140 | Supply and fix switch socket combination5 in 1 , 6 pin , (5/16 Amps ) flush typecontrolled by one switch complete all as specified. |
| 141 | Description all as per serial item No 1 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 142 | Supply and fixing modular switch 2 way 6A module 230/250 volt , AC supply,ISI Marked, with cover plate complete all as specified and directed. |
| 143 | Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified. |
| 144 | Supply and fix switch socket combination5 in 1 , 6 pin , (5/16 Amps ) flush typecontrolled by one switch complete all as specified. |
| 145 | Supply and fixing Bell push, flush type, 5 amp 1way 6A module 230/250 volt with frame and cover complete , AC supply,ISI Marked, with cover platecomplete all as specified and directed. |
| 146 | Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand. |
| 147 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 148 | Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 149 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete. Make- Havells/anchor/Legrand. |
| 150 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. |
| 151 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 152 | S & F Exhaust fan 230 volts , 250mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and directed. |
| 153 | Supply and fix in repairs MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 154 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.. (Note:MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule .Note:Copper thimble shall be used for connection of cable . |
| 155 | Supply and fix MCCB TPN, 240 Volts, 100Amps, 10 kA rupturing capacity415 Voltscomplete all as specified and directed including taking down old one. |
| 156 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed |
| 157 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s.complete all as specified and directed |
| 158 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling inISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduitshall be measured as one RM. |
| 159 | Taking down existing energy meter and refixing the same after completion on the original location all work all as directed by engr-in-charge |
| 160 | Taking down existing water heater of any capacity and deposit the same MES store all as directed by engr-in-charge |
| 161 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
