Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down wooden chowkats or frames withshutters area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (without taking off shutters from frames) and removing from site,complete all as specified and directed by Engr-in-charges. |
| 2 | Taking down wooden chowkats or frames with shutters areanot exceeding 1.50 Sqm(without taking off shutters from frames) and removing from site, complete all as specified and directed by Engr-in-charges. |
| 3 | Taking down shutters of any description not exceeding 1.00 Sqm each leaf and removing from site, complete all as specified and directed by Engr-in-charges. |
| 4 | Taking down steelwindows/almirah complete with shutters area exceeding 1.5 Sqm but n exc. 4 Sqm each from wall fixing complete all as specified and directed by Engr-in-charges. |
| 5 | Taking down steelwindows with shutters area not exceeding 1.5 Sqmeach, from wall fixing complete all as specified and directed by Engr-in-charges. |
| 6 | Taking down steel ventilators complete with shutters area not exceeding 1.0 Sqmeach, from wall fixing complete all as specified and directed by Engr-in-charges. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-charges. |
| 8 | M&L for7 to 8mm thick Non skid joint free coloured ceramic tiles area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match. complete all as specified and directed by Engr-in-charges. |
| 9 | M&L coloured glazed ceramic tilesin vertical surface of size 600x300x7-8mm thick laid over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match.The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered. complete all as specified and directed by Engr-in-charges. |
| 10 | M&L for non skid Colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 11 | All as per above but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed by Engr-in-charges. |
| 12 | M&L machine cut Udaipur Green marble stone slab 18-20 mm thick mirror polished in steps, jambs, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick cement screed bed in CM 1:3 as in steps, cills etc including rounding of edges at nosing. complete all as specified and directed by Engr-in-charges. |
| 13 | M&L 18 to 20 mm thick Black granite stone in single piece in cooking plateform complete laid over 15mm thickrendering layer in CM 1:3 and jointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete and providing necessary holes for gas pipe / water supply pipe etc. complete all as specified and directed by Engr-in-charges. |
| 14 | S&F in repairs Vitreous China wash basin, flat back, size 550*400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and vitreous china pedestal complete all as specified and directed by Engr-in-charges. |
| 15 | S&Fas in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl \"P\" or \"S\" traps, flush pipe of 32mm dia HDPE pipe etc complete all as specified and directed by Engr-in-charges. |
| 16 | S&F in repairs Polymer coloured (Polypropeylene Delrin and ABS) low levelflushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscriptionmark with 2731 with andincluding suitable size of MS brackets, plug, screws all as required incl taking down existinghigh level/low level flushing cistern any type disconnecting pipes and jointingwith new one etcand making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed by Engr-in-charges. |
| 17 | S&Fin repairs stainless steel sink without drainage board, made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracketof overall sizesize 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charges. |
| 18 | S&F in repair stainless steel plate rack made out of 1.00mm thick sheet900x900x200mm complete all as specified and directed by Engr-in-charges. |
| 19 | S&F 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floorsincluding taking down of old GI tubing, 40 mm bore complete all as specified and directed by Engr-in-charges. |
| 20 | S&F in repair 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks, complete all as specified and directed by Engr-in-charges. |
| 21 | S&F in repair bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed by Engr-in-charges. |
| 22 | S&F in repair 15mm in repair bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charges. |
| 23 | S&F Stop valve (angle cock) 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed by Engr-in-charges. (Note : Weight of cock shall not be less than 0.575kg) |
| 24 | S&F in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed by Engr-in-charges. |
| 25 | S&F in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position complete all as specified and directed by Engr-in-charges. |
| 26 | S&F in repair PTMT Float valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed by Engr-in-charges. |
| 27 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs complete all as specified and directed by Engr-in-charges. |
| 28 | Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as specified and directed by Engr-in-charges. |
| 29 | All as item above but 20mm bore, complete all as specified and directed by Engr-in-charges. |
| 30 | M&L Steel Tubes 20mm bore, \"medium grade\", galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and directed by Engr-in-charges. |
| 31 | M&L Steel Tubes 15mm bore, \"medium grade\", galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and directed by Engr-in-charges. |
| 32 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire complete all as specified and directed by Engr-in-charges. |
| 33 | S&Fin repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified and directed by Engr-in-charges. |
| 34 | S&F in repairs stainless steel grating openable 100mm dia with/without hole including fixing with white cement complete all as specified and directed by Engr-in-charges. |
| 35 | S&Fin repair fancy type shower rose 125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint complete all as specified and directed by Engr-in-charges. |
| 36 | S&F in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specified and directed by Engr-in-charges. |
| 37 | M&L for Green Marble 30 cm x 30 cm x 12-15 mm thick machine cut prepolished embedded for bathroom wall as corner shelf round shape complete all as specified and directed by Engr-in-charges. |
| 38 | S&F in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified and directed by Engr-in-charges. |
| 39 | S&Fin repair CP brass soap tray fixed with brass screw complete all as specified and directed by Engr-in-charges. |
| 40 | S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 41 | S&F made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 100 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 42 | S&F for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-charges. |
| 43 | S&F for IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed by Engr-in-charges. |
| 44 | S&F for made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. complete all as specified and directed by Engr-in-charges. |
| 45 | S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing. complete all as specified and directed by Engr-in-charges. |
| 46 | S&F 150 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charges. |
| 47 | S&F 100 mm long stainless steel medium weight butt hinges with galvanised MS hinge pin etc. complete all as specified and directed by Engr-in-charges. |
| 48 | S&F 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charges. |
| 49 | S&F150 mm long Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified and directed by Engr-in-charges. |
| 50 | S&F100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed by Engr-in-charges. |
| 51 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed by Engr-in-charges. |
| 52 | S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed by Engr-in-charges. |
| 53 | S&FMS helical door spring 300 mm long ordinary rat tail pattern springs including roller & roller plate fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats. complete all as specified and directed by Engr-in-charges. |
| 54 | M&L for providing and fixing of window, ventilator fabricated from roll formed sections made of galvanized steel colour coated /powder coated (Base steel as per IS 513 \"D\" quality, Galvanized as per IS 277 with Zinc of 120 grams/Sqm) with total coated thickness of 0.60 mm Paint specifications: Coated Sections should be coated with primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyster paint of 12-16 micorns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyster Powder up to 50-60 microns thick. Dimensions of Sections :Sections for Frame of 72mm x 50mm, Section for Mullion of size 72mm x 50mm, Section for Shutter Frame of size 47mm x 20mm, Section for Frame Glass Beads of 12mm x 12mm, and Section for Fly mesh of 40mm x 20mm. Fixing Details : Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/Mullion using Nylon Cap. Ethyl Propylene Daimine Monomer (EPDM) Gasket should be used all around glass in shutter and fixed galss. Rubber Gasket should be used around Fly mesh to fix in Mesh Shutter. Accesories: Each Glazed shutter should be provided with S.S. Pivot Hignes-01 set, Seccolor Handle & Seccolor Stay Glass: Glazed shutter and fixed glass portions to be provided with a glass of 5 mm plain float Glass. Mesh: Mesh shutter shall be provided with a stainless steel 32 guage Fly mesh of 304 grade with 144 holes per sq. Inch. Windows shall be provided with grill made of 10mm Sqm bars welded to at 150mm centre-to-centre, 6mm x 12mm MS flat Iron. Total grill unit should be powder coated and fixed to window frame with screws. Window frame should be fixed to brick/concrete masonory by using Nylon self-expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. Note: The item includes everything as, painting the surfaces, fixing, all necessary accesories, glass, mesh, etc, all as per given spcifications, complete all as specified and directed by Engr-in-charge. |
| 55 | Supply andfixing 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charges. |
| 56 | S&F of stainless steelwire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents& door shuttersetc complete all as specified and directed by Engr-in-charges. |
| 57 | S&F in repairs 18 mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works, complete all as specified and directed by Engr-in-charges. |
| 58 | S&F Continious piano hinges, continuous type of mild steel bright finish or electrogalvanized with width of flap (when open) 30mm complete all as specified and directed by Engr-in-charges. |
| 59 | S&F 75mm long Brass handle, cast type, polished brightfixed with nut and screwsto cupboard shutter complete all as specified and directed by Engr-in-charges. |
| 60 | S&Fmagnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, complete all as specified and directed by Engr-in-charges. |
| 61 | S&F in repairs stainless steel type curtain rod 20 to 25mm dia as per sample complete all as specified and directed by Engr-in-charges. |
| 62 | S&Fof purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 20 to 25mm dia as per sample as in repair. complete all as specified and directed by Engr-in-charges. |
| 63 | S&F of stainless steel decorative finials (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 20 to 25mm dia curtain rods as per sample as in repair complete all as specified and directed by Engr-in-charges. |
| 64 | S&F of stainless steel decorative finials wall to wall trade pattern suitable for decorative type curtain rods20 to 25mm dia as per sample as in repair complete all as specified and directed by Engr-in-charges. |
| 65 | M&Lfor fabrication ofpressed steel cupboard shutterusing1mm thick MS plainsheet with frame 1.25mmthick bent toshape including two coat of synthetic enamel painton internal surfaces & two coat of hammer tonefinish on external surfacealongwithlocking arrangementmortice lock ,handle etc complete all as specified and directed by Engr-in-charges. |
| 66 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcementas required to facilitate demolition, complete all as specified and directed by Engr-in-charges. |
| 67 | M&L for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and directed by Engr-in-charges. |
| 68 | Material and labour for repair to RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in chajjas beams etc upto tripple storey bldgs including necessary scaffolding and formwork complete all as specified and directed by Engr-in-charges. |
| 69 | Material andlabour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed by Engr-in-charges. |
| 70 | Demolitioncement concretein any position not other wise specifically provided for complete all as specified and directed by Engr-in-charges. |
| 71 | Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately complete all as specified and directed by Engr-in-charges. |
| 72 | M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed by Engr-in-charges. |
| 73 | Material andlabour providing and applying roof treatment as folowing stages :-(i) Apply 1st coat of PU coating (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50mm in both directions when the surface is still tacky, this is optional , to be assessed as per site requirements to acheive higher mechanical properties.(ii) Allow 1st coat to dry for 10-12 Hrs.(iii) Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent) as per manufacturer\"s instructions. Extend waterproofing treatment up to 200mm and terminate into groov on the parapet wall.(iv) Protect the applied liquid membrane bu sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering and including 25mm thick plastering in CM 1:3 with admixture and WPC. complete all as specified and directed by Engr-in-charges.Note 1 : Treatment shall be done through authrised representative of manufacturer\"s instructions.Note 2 : Dismanteling/removal of APP membrane and other treatment of roof includes as rate quoted by contractors, no extra amount paid on this account. |
| 74 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed by Engr-in-charges. |
| 75 | M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub basecomplete all as specified and directed by Engr-in-charges. |
| 76 | Supply andfixingfor machine pressed precast concretecoloured interlocking ( glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade asin hardstandingetc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified and directed by Engr-in-charges. |
| 77 | Material & labour for PCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed by Engr-in-charges. |
| 78 | Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete all as specified and directed by Engr-in-charges. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. |
| 79 | Taking down cement plaster from brick/stone walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 80 | Material andlabour for 15mm thick rendering in cement mortar (1:6) on stone masonry or other than fair face of bricks masorry (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 81 | Material andLabour for 10mm thick average as baking coat rendering on fair faces of brick work (External walls) in cement mortar 1:4 rough finished even and fair, complete all as specified and directed by Engr-in-charges. |
| 82 | Material andLabour for 15mm thick rendering on fair faces of brick work or concrete surfaces (external walls) upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified and directed by Engr-in-charges. (i) WPC shall be measured and paid separately. (ii) Rendering upto 6.5 mtr ht shallbe included in the quoted rate). |
| 83 | Material andlabour10 mm thick cement plaster in cement mortar 1:3 on ceiling,finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 84 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed by Engr-in-charges. |
| 85 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed by Engr-in-charges. |
| 86 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified and directed by Engr-in-charges. |
| 87 | Material & Labour for preparing new plastered surfaces and applying two coats white wash over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed by Engr-in-charges. |
| 88 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed by Engr-in-charges. |
| 89 | M&L for preparation of old plastered or un-plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint)having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charges. |
| 90 | Material and labour for preparation of old Plastered or un-plastered surfaces ofceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceiling surfaces complete all as specified and directed by Engr-in-charges. |
| 91 | Material and Labour for repairing of RCC projection, Chajjas, Facia,Bands, Shelves, Beam, RCC railing, Balcony and similar works by dismantling of loose / disuntegrated portion of RCC at any height and in any situation floor including provn of support with chicken wire mesh and dubbing/filling with PCC (1:2:4) type B-0 using 12.5 mm graded aggregate 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed by Engr-in-charges. |
| 92 | Supplying & laying 03 coats of reinforced acrylic coating ‘New Coat’ as on sunken floor applied @1.5 Ltr/Sqm in 03 coats to achieve total 1mm thickness in any position including cleaning surface of sunken slabwith wire brush/mechanical brush and with water thoroughly to remove all dust/dirt and loose particles to expose base concrete/sunkenslab etc including repairing of loose/defectivejointsand applying 15mm thick plasterin CM 1:3 to level the surface and treatment to be applied all as per manufacturers instructions, complete all as specified and directed by Engr-in-charges. |
| 93 | Material & labourfor 100mm thick PCC 1:2:4 type B-1, (20mm graded aggregate) as in sunken floor complete all as specified and directed by Engr-in-charges. |
| 94 | Cutting holes but in stone walls built in cement mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required complete all as specified and directed by Engr-in-charges. |
| 95 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-charges. |
| 96 | Supply and fixing for mild steel framed angle iron work as in fixing of cooler stand/vertical wall ladder/shutter frame/truss angle by drilling/cutting the stone masonry wall and fixing up to 2nd floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge. |
| 97 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-charges. |
| 98 | Supply & Fixing0.50 mm thick prepainted galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc. complete all as specified and directed by Engr-in-charges. |
| 99 | Dismantling of 100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortarand taking out complete all as specified and directed by Engr-in-charges. |
| 100 | S&F 110mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 101 | S&F 110mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-charges. |
| 102 | S&F 75mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 103 | S&F 75mm dia PVC (SWR) type \"B\" pipe single sockets in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-charges. |
| 104 | S&F 110mm dia PVC (SWR) bends any radius including cutting of holes. complete all as specified and directed by Engr-in-charges. |
| 105 | S&F 75mm dia PVC (SWR) bends any radius including cutting of holes. complete all as specified and directed by Engr-in-charges. |
| 106 | S&F of 110mm dia PVC (SWR) junction single, single (single \"T\") equal or unequal. complete all as specified and directed by Engr-in-charges. |
| 107 | S&F of 75mm dia PVC (SWR) junction single, single (single \"T\") equal or unequal. complete all as specified and directed by Engr-in-charges. |
| 108 | S&F 75mm dia PVC (SWR) floor trap, with grating including jointing with solvant cement complete all as specified and directed by Engr-in-charges. |
| 109 | S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and directed by Engr-in-charges. |
| 110 | M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed by Engr-in-charges. |
| 111 | M&L for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed by Engr-in-charges. |
| 112 | Material & Labour for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed by Engr-in-charges. |
| 113 | Supply & Fixing in repair aluminium 300mm long hat pegs of 6 Nos peg set of good quality complete all as specified and directed by Engr-in-charges. |
| 114 | Supply andfixing (in repair) galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and directed by Engr-in-charges. |
| 115 | Material & Labour 18/19mm thick block board ,grade 2 quality interior grade , commercial typefixed with screw to timber frame work includingtaking down complete all as specified and directed by Engr-in-charges. |
| 116 | Material & Labour Decorative laminate type 1 of0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer\"s complete all as specified and directed by Engr-in-charges. |
| 117 | Material & Labour for preparing new plastered surfaces and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty on ceiling completeall as specified and directed. |
| 118 | Material and labour for preparation of old Plastered or un-plastered surfaces ofceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty complete all as specified and directed by Engr-in-charges. |
| 119 | M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement including WPC in CM 1:4 incl taking down existing cement plaster and including necessary arrangements to work on roof projection, cornice & chajja etc. (WPC Measured separately) complete all as specified and directed by Engr-in-charges. |
| 120 | Supply and fixing , vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified and directed by Engr-in-charges. |
| 121 | Supply & fixedin repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracketof overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed by Engr-in-charges. |
| 122 | S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position after dismantling (water tank of cap exc 250 ltr and n.exc 500 ltr) and removing to store and complete all as specified and directed by Engr-in-charges. |
| 123 | S&F in repairs 15mm bore Gun-Metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charges. |
| 124 | Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed by Engr-in-charges. |
| 125 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engr-in-charges. |
| 126 | M&L Brick work using old size bricks with sub class \"B\" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 127 | Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-charges. |
| 128 | M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulatedstranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonrty wall surface with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision of PVC box of appropriate size for fixing switches sockets etc. all as specifiedfor One light point / Fan/ bell point controlled by one switch. complete all as specified and directed by Engr-in-charges. |
| 129 | (a) One light point controlled by one switch with cables 1.5 sqmm size. |
| 130 | (b) One fan/ exhaust fan point controlled by one switch with cables 1.5 sqmm size. |
| 131 | (c) One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 132 | (d) One 3 Pin socket oulet 5Amps on indepndent, with cables 1.5 Sqmm size |
| 133 | (e) One light point controlled by two 2 - way switches, with cables 1.5 sq.mm size. |
| 134 | (f) One 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size |
| 135 | (g) One bell/ buzzer point controlled by one push button on the same board withother switches or independent with cables1.5 sq.mm size. . |
| 136 | S&F switch piano flush type single pole one way 5/6 Amps. complete all as specified and directed by Engr-in-charges. |
| 137 | S&F lamp holder, PVC/Polycarbonate typewith back plate suitable for batten fittings including dismantling old one. complete all as specified and directed by Engr-in-charges. |
| 138 | S&Fsocket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete includingdismantling old one. complete all as specified and directed by Engr-in-charges. |
| 139 | S&F ofswitch piano 15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge includingdismantling old one. |
| 140 | S&F ofswitch piano 15 Amp 230 Volt, flush button single pole two way complete all as specified and directed by Engr-in-Charge includingdismantling old one. |
| 141 | S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one. complete all as specified and directed by Engr-in-charges. |
| 142 | S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block includingdismantling old one. complete all as specified and directed by Engr-in-charges. |
| 143 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed by Engr-in-charges. |
| 144 | S & F switch piano flush type single pole 16 Amp 2 Way. complete all as specified and directed by Engr-in-charges. |
| 145 | S & F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-in-charges. |
| 146 | S & F Bell push, flush type, 5 amp complete all as specified and directed by Engr-in-charges. |
| 147 | S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specified and directed by Engr-in-charges. |
| 148 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charges. |
| 149 | M&L MCB TPN DB comprising of sheet metal enclosure double door suitable for mounting MCB 415 Volts 4 way includingdismantling old one. complete all as specified and directed by Engr-in-charges. |
| 150 | M&L MCB SPN DB comprising of sheet metal enclosure single door suitable for mounting MCB 240 Voltswithbusbar 200 amps rated 4 way includingdismantling old one. complete all as specified and directed by Engr-in-charges. |
| 151 | S&F MCB TPN IFP 40 to 100 Amps 415V 10KA \"B\" curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed by Engr-in-charges. |
| 152 | S&F RCBOs Double pole, 30mA 32 Amp rating for earth leakage, overload & short-circuit protection. complete all as specified and directed by Engr-in-charges. |
| 153 | Supply and fixing SPN 32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and directed by Engr-in-charges. |
| 154 | Supply and fixing SP 6 to 32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and directed by Engr-in-charges. |
| 155 | Taking down carefully, deposited to MES store and hanging only ceiling fan & Exhaust Fanand connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 156 | S&F exhaust fans AC single phase 240 Volts, 50Hz RPM 1200 & Copper winding of fwg size sweep made of sturdy Engineering plastic complete with louvers shutter and complete accessories including making hole with suitable size for Exhaust fan, after completer of work, finishing with cement and plastering and repainting with existing color all as specified and directed by Engr-in-Charge. |
| 157 | 250 mm |
| 158 | 300 mm |
| 159 | Excavating in trenches n.exc 1.5 m widthand n.exc 1.5m in depth for taking out cable and cable coverand getting out in any type of soil complete all as specified and directed by Engr-in-charges. |
| 160 | Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm. complete all as specified and directed by Engr-in-charges. |
| 161 | Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-charges. |
| 162 | M&L for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. complete all as specified and directed by Engr-in-charges.Note :- For the purpose of payment only punned thickness will be measured. |
| 163 | Supply and laying reinforced precast concrete cable cover, class LV,type 1 flat, 250mm x 150mm x 40mm. complete all as specified and directed by Engr-in-charges. |
| 164 | Taking out old GI Pipe 50mm dia from trenches and removing from site complete all as specified and directed by Engr-in-charges. |
| 165 | Supply and fix medium grade50 mm dia GI pipe fix complete to wall , poles etc with suitable clamp for protection of cable complete all as specified and directed by Engr-in-charges. |
| 166 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size25 sq mm 3.5 core. complete all as specified and directed by Engr-in-charges. |
| 167 | Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade,for protection of earth leadcomplete all as specified and directed. complete all as specified and directed by Engr-in-charges. |
| 168 | S&F Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x2.5sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. complete all as specified and directed by Engr-in-charges.Note : Two run of 2.5 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM. |
| 169 | S&F Submain wiring alongwith earth wire with the following sizes of 2x4.0 sqmm + 1x4.0 sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. complete all as specified and directed by Engr-in-charges.Note : Two run of 4.0 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM. |
| 170 | M & L for scrapping out old rusted and corroded sufaces to making good surface of iron body/CRCA sheet main DBs of any shape & size for external and internal surface and preparing the exposed surfaces & applying two coat of aluminium paint paint over a coat of red oxide zinc crome primer complete all as specified and directed by Engr-in-charges. |
| 171 | S&F LED security light luminaries of 35 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED\"s should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length complete all as specified and directed by Engr-in-charges. |
| 172 | Taking down carefully, depostied to MES store and refixing at the same place electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25/50 litre as existing complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engr-in-charges. |
| 173 | Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front sideopenable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm complete all as specified and directed by Engr-in-charges.Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item. |
| 174 | M&L MCB TPN DB sheet metal enclosure single door suitable for mounting MCB 415 Volts withbusbar 4 way including drilling on existing stone surface and dismantling old one. complete all as specified and directed by Engr-in-charges. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
