|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all soft /loose soil complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 type D-2 using 40mm grade in foundations, filling and mass concrete complete all as specified and directed |
| 3 | M & L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 4 | M & L for RCC M-25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 5 | Formwork forrough finish surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified and directed |
| 6 | Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed |
| 7 | S&F Reinforcement TMT steel barsof grade Fe-500/Fe-500 D of 10mm dia and over, for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 8 | S&F Reinforcement TMT steel barsof grade Fe-500/Fe-500 D of 5mm dia and over up to and including 10mm dia in stirrups, for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 9 | M&L for 20mm thick Granite (of any type) work (table rubbed and polishd ) in steps, jambs, pillars, indow-cills, cooking platforms and like in cement mortar (1:3) 12mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 10 | S&F of joist, channel angle, or tee sections ISMB of Fe-410-W (Gde E-250) quality B-7 M long welded to guesset plated and fixed with nut & bolts at the height of upto 3mm in one piece oly coplete all as specified and directed.Note : The cost of Necssary arrangement of HYdra/ Crane safety equipment and trafic contral etc to be demed to be included in the quoted rates. |
| 11 | S&F mild anchoring steel bolts purpose made with hexagonal or square head one end and screwed the other, or screed both ends each screed end to be fitted with washers and one hexaagonal or square nut, exc 30cm long but n exc 1.50m ling complete all as specified and directed |
| 12 | S&F of MS work of Fe 410-W (Gde 250) for box type pintels higes for gate, locking arrangement, monkey tail bolt, roller with roller plate of 550x50x5mm Tee and welded to MS gate shutter complete all as specified and directed. |
| 13 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise described, over 10cm idth or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 14 | S&F 1mm thick hexagonal patter retro reflective self adhesive plastic stickers sheets of approved colour as per size design and pasted on aluminium composite panel exterior grade sheet including laser cutted figures such as direction signs, photoes, words and alphabets complete all as specified and directed. |
| 15 | Returning filling in hard/dense soil, including spreading, levelling, watering and well ramming in layer not exc 25 cmcomplete all as specified and directed. |
| 16 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
