|
| 1 | Taking downchowkats or framesnot exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 2 | Taking downchowkats or frames exceeding 1.5 Sqm but n exc 4.00 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 3 | Taking down shuttersexc 1 sq. m and not exc 2 sq. m each all as specified and directed. |
| 4 | Taking down shuttersexc exc 2 sq. m each all as specified and directed. |
| 5 | S&F factory madesolid PVC door frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178of SSR Part -II complete all as specifiedand directed. |
| 6 | S&F factory madesolid panelPVC door shutter 30 mm thick (style) consisting of frame made outof M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page No. 174 of SSR Part -II complete all as specifiedand directed. |
| 7 | S&F plain, solid, 2nd hard wood class straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with the glue pinned at joints as in doors and windows with 2nd class hardwood complete all as specified and directed. |
| 8 | M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed. |
| 9 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed. |
| 10 | M&L forPCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 11 | S&FFfush shutters, solid core construction 30 mm thick with particle board core and plywood face panels, commercial type on both sides as in doors all as specified and directed. |
| 12 | S&F 30mm thick glazed and skeleton shutters, open rebated andprepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed. |
| 13 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed. |
| 14 | S&F 100 mm butt hinges heavy weight cold rolled mild steel and fixed complete all as specified and directed. |
| 15 | S&Faluminium alloy sliding door bolt 200 mm long with hasp and staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed complete all as specified and directed. |
| 16 | S&F 150 mm aluminium anodised barrell tower bolts of extruded section and fixed complete all as specified and directed. |
| 17 | S&F 150 mmExtruded aluminium alloy handles, fabricated type, anodised all as specified and directed. |
| 18 | S&F in repairs door closer hydraulically ( aluminium extruded section body) regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 19 | S&F in repairs floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawnsteel spring complete all as specified and directed. |
| 20 | S&F in repair 200 mm SS handles cast type polished brightcomplete all as specified and directed. |
| 21 | S&F in repairaluminium alloy sliding door bolt 250 mm long with hasp and staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed complete all as specified and directed. |
| 22 | Supply and fix in repair and stick solar control film 25 microns thick on glass panes as per manufacturer’s instructions complete all as specified and directed. |
| 23 | S&F heavy duty floor door spring Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed. |
| 24 | M&L forpreparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 25 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 26 | M&L for 4mm thick (3Nos of ply) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed. |
| 27 | M&l for french polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wooden filler on new works with two or more coats complete all as specified and directed. |
| 28 | S&Fpowder coated Aluminium window frame 2/3 track outer frame 92 mm x 31.75 mm x1.50 mmand guide rail of section Nos size 92 x 31.75 x1.50mm and shutter section 40 x 18 x 1.550 mm sliding type including 5.0mm thick sheet glass of selected quality and fixed with rubber beading and aluminium hardware fittings including taking down existing one complete all as specified and directed. |
| 29 | S&F anodisedaluminiumDG-102 (anodised transperent or dyed to require shade according to IS 1868 with minimum anodic coaing of grade AC -15) of approved design / pattern , with approved standered scetion and fixed to the existing window frame with CP brass /stainless steel screw @200 mm ceneter to center ,WT 225gm/square feet including cutting the gril to propre opening size for fixig and operation of hanmdles and fixing approvedanodised aluminum stanedre scetion around the openings , all comete as per requirement and direction of Engr-in- Charge. |
| 30 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choicelamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadingscomplete including taking down existing one.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx)ShutterTop rail: 114.30 x 2.15 mm thick (1.836 Kg/RM appx)Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx)Middle rail: 83.50 x 1.70 mm thick (1.243 Kg/RM appx)Vertical rail :85.00 x 1.80 mm thick(1.302 Kg/RM appx) |
| 31 | Taking down aluminnium shutters ofwindows, ventilators etcof any description not exc 1 Sqm each and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and directed.Note:- Quoted rateis inclusive costof rubber beading, aluminum snap beading, screws, cleat etc whatever requires at site) |
| 32 | Taking down aluminnium shutters of doors, windows of any description exc 1 Sqm but not exceeding 4 sqm eachand refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and directed.Note:- .Quoted rateis inclusive costof rubber beading, aluminum snap beading, screws, cleat etc whatever requires at site |
| 33 | Dismantling of Wall and ceiling boards/ wall partition (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets / aluminium frame workcomplete all as specified and directed. |
| 34 | Material and labour for partition wall (Pannels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket,5.5mm thick sheet glass and 6mm thick prelaminated partical board, interior grade with decorative choice laminationcomplete all as specified and directed. Note :-The scope of work include for taking down existing damaged aluminium door/window/grill/panels and the unit rate quoted shall be deemed to include for the same. |
| 35 | S&F in repairanodised aluminium snap grid frame work of size 605x605mmusing main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm)and wall angle of size 40mm x 25mm x 2mm( weight not less than 0.36 kg / Rm) and10mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws,in ceilingwith hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete , including cover filletscomplete all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 37 | S&F MS framed work such as grills gratings etc with end of bars shouldered/or riveted or forged into spikes framed guard bar, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar works steel quality conformingto Fe-290, Grade E- 165 complete all asspecified directed . |
| 38 | M&L for preparation of new or previously untreatedsteel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 39 | M&L for preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed |
| 40 | S&F 12 mm thick toughened glassas in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes requiredc including taking out old one omplete all as specified and as directed |
| 41 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 42 | M&L for pre-cast cement concrete 1:3:6 type C1(using 20 mm graded crushedstone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 43 | Demolition of cement concrete( un reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including removingdebris out side ND(V)complete all as specified and directed. |
| 44 | M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) in floors (plinth protection) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 46 | M&L for rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement all as specified and directed. |
| 47 | M&L for rendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement all asspecified and directed. |
| 48 | M&L for 10 mm thick plastering in cement mortar 1:3on concrete surfaces of ceiling and finishing the surfaces fair and even without using extra cement all as specified and directed. |
| 49 | M&L for preparing newly plastered and unplastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed. |
| 50 | M&L for preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 51 | M&L forpreparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primercomplete all as specified and directed. |
| 52 | M&L forpreparation of newly plastered surfaces of walls and applyingtwo coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primerover a coat of cement based wall putty minimun thickness 1.5mm and cutting to smooth surfaces by sand paper complete all as specified and directed. |
| 53 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 54 | Material & Labour for coloured Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 10 mm thick in 1:4complete all as specified and as directed. |
| 55 | Material& Labour for coloured glazed ceramic tiles (300 x 450)x 7-8 mmthickin dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over & including rendering in CM 1:3, 10 mm thick complete all as specified and as directed. |
| 56 | M&L forlight shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cementper sqmcomplete all as specified and as directed |
| 57 | M&L for light shed vitrified ceramic tiles 10 mm thick (square/ rectangular) polished as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm thick 1:4 cement mortercomplete all as specified and as directed |
| 58 | M&L forGranite (of any type) slab, 18 to 20 mm thick machine cut in skirting/dado laid over 15 mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing complete all as specified and directed |
| 59 | Material & labour for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc., complete all as specified and as directed. |
| 60 | M&L for acid resistant tiles 15mm thick vitreous unglaged, set jointed and pointed in chemical resistant mortar, resin type in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement mortor (1:6) screed bed complete all as specified and directed. |
| 61 | M&L for stair tiles 10 to 12 mm thick as in treads/ rise / landing of stair laid over 15 mm thick cement screed (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the tilescomplete all as specified and directed. |
| 62 | S&F aluminium composite panel of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwtiched by 2.5mm polythene core with PVDF coating of 30 micron, face fully covered with high intensity prismatic (Type-IV) sheeting conforming to type-III of ASTM-D 4956-01 and fixing the same to the structural frame work by means of suitable self tapping screws, rivets or bolts and nuts and erecting in position as in roof covering, walling, column /beametc covering including taking out old onecomplete all as specified and directedNote:- Cost of aluminium frame work is deemed tobe included in the quoted rate |
| 63 | S&F factory made UPVC white colour sliding window three track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67 mm). Sliding mesh Sash (42mm x 57mm) sliding interlock (one vertical lenght in each shutters) (45.5mm x 28mm), Glazing bead (24.5mmx 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + - 0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated ), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: the unit rate quoted by the contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 64 | S&F coloured tinted glass 4.0 mm thick ordinary quality fixed with aluminium/PVC/wooden beads in squares/rectangular shape as fit in existing shutters/frame work of area exc 0.5 sqm but n.exc 2 sqm complete all as specified and directed. |
| 65 | S&F in repairsstainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed. |
| 66 | Refixingceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets including taking down thesame complete all as specified and directed. |
