Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge. |
| 2 | Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge. |
| 3 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (for single shutter) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm (for double shutter) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item. |
| 6 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item. |
| 7 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 8 | Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer, including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves)shall be measured in sqm for payment.(ii)Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 9 | S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge. |
| 10 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge. |
| 11 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge. |
| 12 | S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge. |
| 13 | S&F 150 mm long aluminium handle cast type anodised all as specified and directed by Engineer - in - Charge. |
| 14 | S&F 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed. |
| 15 | S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge. |
| 16 | S & F continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps30mm complete all as spd and directed. |
| 17 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor having overall length of cover plate 140mm complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface(not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge. Note : Girth of frame will be measured seperately under same item. |
| 20 | Providing and fixing of Frame (127mm x 62mm) factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed. |
| 21 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\" zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 22 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note : Glass shall be paid separately. |
| 23 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 24 | S&F 4.8 mm thick sheet glass ordinary quality n exc 0.5 sqm in each pane fixed in UPVC window / ventilator cut to required size and fixed with PVC / Neopane gasket etc. complete all as specified. |
| 25 | S&F 4.8 mm thick glass frosted on one side n exc 0.5 sqm in each pane on one side ordinary quality fixed in aluminium window/ ventilator cut to required size and fixed with PVC/Neopane gasket etc. complete all as specified. |
| 26 | Demolition/taking out of mud/lime concrete from roofs, any thickness, including removing / cutting uprooting grass, vegetations and roots of small plants etcon roof and surrounding/parapet wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direction of AGE) at any distance upto 500 metres from the site complete all as specified and directed. |
| 27 | Demolition of cement concrete (unreinforced) of any description and in any position/old existing felt/ plaster/tiles etc.including removal of demolished material out of defence land complete all as specified. |
| 28 | Supply of SBR waterproofing compound @ 2% ofper kg cement used complete all as speccified.Make : Fosroc/Sika/Choksey/Bostik/STP/Asian Paints/Berger Paints |
| 29 | M&L for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded aggregate) using waterproofing compound (SBR) for maintaining proper roof slope and finishing cement concrete surface even and smooth wihout using extra cement complete all as specified.(Minimum thickness of concrete should not be less than 50mm at any point)Note : Waterproofing compound should be measured and paid seperately. |
| 30 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coatingas per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalentby brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat ofShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicatorapproved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 31 | M&L rendering 15mm thick water proofing plaster in CM 1:3 on slab/roof admixed including and with Dr. Fixit pidilite LW+ @ 200 ml per bag of cement. |
| 32 | M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed. |
| 33 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 34 | M&L 10mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 35 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 36 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 37 | Treating apparent visible efflorescence by first cleaning using hard wire brush and all crystal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 part water) and apply it to the afflorescence affected area using a nylon brush. Allow the vinegar/water solution to sit on the serface of the affected area for 15 minutes, but do not allow the solution to dry, Rinse the area with clean water using low pressure jet. Two cycle of cleaning using vinegar water solutions to be repeated complete all as specified and as directed. |
| 38 | M&L for the joints of briks to cleaned shall be pointed using cement putty made at site using sika latex/SBR polymer or equivalent diluted at retio of 1:4 with water. The solution to made shall be used to mix with cement to make a putty consistency paste. The cement putty shall be then work out in the joints complete all as specified and as directed. |
| 39 | M&L for the bricks so pointed shall be cleaned for all dust are deposit using brush. A undiluted single component acrylic polymer - Sika Raintite or equivalent to be used to prime the brick surface. The primer while being tacky the first coat of water proofing coating is done, Second coat is applied after a time interval of 4-6 hrs after the first has dried. The water proofing coating shall be two component polymer modified cementious coating - Sika Top Seal - 107, having a thickness of 1.5 mm in 2 coat. The material to be factory batched and ready to use. The two component shall be mixed using low speed drill having a RPM 350-450 and fitted with a paddle.The mixing to be done for 3-4 minutes to give a brushable consistency mix. The coating shall be done using 100-150 mm wide brush. It is to be take care that material while being used is agitated every 3-5 minutes to avoid powder part getting settled. The water proofing coating shall have below properties Tensile strength- 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370 ) Bond Strength 2.0 N/mm2 at +27degree C (Failure in substrate). After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper machanical key is provided for subsequent plaster complete all as specified and as directed |
| 40 | M&L for plastering 15mm thick over the treated surface in CM 1:4 cement sand plaster added with acrylic polymer Sika Plastocrete Plus @ 3% or equivalent by weight of cement finished even & smooth without using extra cement all as specified and directed by Engineer-in-charge. |
| 41 | M & L for preparation of new surfaces ofceiling incl beams etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 42 | M & L for preparation of old surfaces by complete removal of existing treatment of painted ceiling incl beams etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 43 | M & L for preparation of new surfaces of walls incl pillar etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 44 | M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 45 | M & L for preparation of new surfacesof wall/ceiling incl pillars etc. and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 46 | M&L for preparation of old surfaces by complete removal of existing treatment of painted wall/ceiling incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 47 | Demolition of cement concrete (un reinforced) of any description in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises. |
| 49 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articlesall as specified.& directed by Engineer -in-charge.. |
| 50 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 51 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 52 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 53 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 54 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 55 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 56 | M&L Green marble work 14 to 16mm thick (table rubbed and polished) in single piece in steps,risers, jambs, pillars, window cills, cooking platforms over cement screed base laid andincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:4)all as directed by Engineer-in-Charge. |
| 57 | M&L14-16 mm thick granite (of any type ) work (table rubbed and polished ) in window cills & cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15 mm thick screed bed in CM 1:4 complete all as specifed. |
| 58 | Providing edge moulding to 14-16mm thick stone (marble stone any description) of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete |
| 59 | Providing edge moulding to 14-16mm thick stone (granite stone any description) of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete |
| 60 | Dismantling water tanks and removing to store of 500 ltr capacity |
| 61 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I. |
| 62 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 63 | Disconnecting existing tanks of 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) |
| 64 | Cleaning and removing all scale and dirt, etc, from tanks of 500 litre capacity and from mouths of circulating pipes etc |
| 65 | M&L in repairsball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 66 | S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 67 | M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc.(b) Applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface and on existing floor. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirement (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified.Manufacturer : Make : - Dr.Fixit/Fosroc/STP/Asianpaints.Note: 1. The treatment shall be carried out by approved authorised applicator approved by GE as per manufacturer instructions and as directed by Engineer-in-charge.2. PCC filling in sunken portion will be measured seperately.3. Plan area of floor shall be considered for payment. |
| 68 | M & L PCC (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in sunkenfloor complete all as specified. |
| 69 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 70 | Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed. |
| 71 | Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed. |
| 72 | Supply&fixing110mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 6kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalong walls, complete all as specified and as directed by Engineer-in- charge. |
| 73 | S&F 110mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 6kg/sqcm)in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 74 | Supply for Pipe Supporting Clamping for Single pipe ofPVC dia 110 mm (4\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs.2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance75 mm (3\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\") - 2 nos.Fixing Details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 75 | Supply&fixing75mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 6kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwalls, complete all as specified and as directed by Engineer-in- charge. |
| 76 | S&F 75mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 6kg/sqcm)in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 77 | Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance100 mm (4\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted \"C\" Channel with ribs to be used of size 250 mm (10\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material 48mm x 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 100 mm (4\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\")PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 78 | Supply & fixingPVC(SWR)bends(anyradius)suitablefor110mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 79 | Supply & fixing PVC(SWR)bends(anyradius)suitablefor75mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 80 | Supply & fixing PVC(SWR)floortrap,plainwithgrating,suitablefor100/75mmborepipeincluding jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 81 | S&F in repair SS bottle trap of 32mm bore dia of discharge pipe with minimum water seal of 25mm complete all as specified and as directed. |
| 82 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 83 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 84 | Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 86 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 87 | S&F 110mm PVC(SWR) couplers complete all as specified and directed. |
| 88 | S&F 75mm PVC(SWR) couplers complete all as specified and directed. |
| 89 | S&F 110mm PVC(SWR) branch piece, single (single Y) equal or unequal fixed with solvent cement, with oval access door, complete all as specified and directed. |
| 90 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store |
| 91 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store |
| 92 | Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store |
| 93 | Supply of Tollet Water Supply Pipe 3/4\" (20 mm)-2 nos. downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt R/M System -1. Domestic Water Supply Down take lines 3/4\" GI-2 nos. from Terrace to 1st & Ground Floor Vertical Fixed line with wall distance 4\": Pipe Support Clamping made of: 1. Profile Bracket Wall Distance 4\" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method-ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 13 with Serration as per DIN 6923. 2. Slotted \"C\" Channel B3 Type to be used of size 10\" (Continuous Slotted \"C\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm.3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx, Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985)-610 grams/m2 (>85 microns).Material Grade: IS 1079 used as per MTC confirms to EN 10204 3.1.Material Qty: 1. Profile Bracket Wall distance 4\"-2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 10\" - 1 No.; 3. U Bolt R/M for 3/4\" GI pipe Dia. - 2 nos. 4. Justi Khilla GI coated 2 1/2\"-4 nos. Fixing details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. |
| 94 | Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified |
| 95 | Supplying and laying of CPVC pipes 25mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified |
| 96 | Supplying and laying of CPVC pipes 32mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified |
| 97 | S&F in repairs wall mounted vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and including Jet spray and plastic seat cover with mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 99 | S&F in repair PVC concealed type flushing cistern set of capacity 10 ltr with half frame including all fixing accessories and knob fixed in wall and including flush pipe of PVC 32mm bore and connection to WC pan making good dismantled portion of wall complete all as specifed and directed. |
| 100 | S&F in repair vitreous china,whitewash hand basin ,pedestal type, flat back size 550x400mm & incl padestal complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified. |
| 102 | S & F in repair 15mm bore CP Angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 103 | S&F in repair 15mmstop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 104 | S&F brass chromium plated wall mixer for mixing hot& cold water screwed down for iron pipe and fixed as directed by Engr-in- charge. |
| 105 | S&Fbrass chromium plated central hole basin mixer with regular spout,popup waste system and including 450mm long braided hoses Hot and cold with connection and nuts complete all as specified and directed by Engr-in-charge. |
| 106 | S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F in repair for brass chromium plated shower rose 150 x 150 mm size with swivel joint including fixing to 15 mm dia steel pipe or union. |
| 108 | S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge. |
| 109 | S & Fbrass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge . |
| 110 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge. |
| 111 | S&F 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. |
| 112 | S&F in repair stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as directed. |
| 113 | S & F in repair stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge. |
| 114 | S&F 25 mm dia drapery curtain road with decoative end knobs complete with brackets and fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 115 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for. |
| 116 | Formworkto soffits of suspended slabssuch as roof slabs , floor slabs , landingand similar work not exceeding 200mm thick all as specified |
| 117 | M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge. |
| 118 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 119 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 120 | M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 121 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weightcomplete all as specified. |
| 122 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 123 | S&F Plain fibre glass reinforced translucent sheeting of 2mm thickness, green colour, fixed in roof, wall, etc., with and including necessary coach screws and washers for fixing, complete all as specified and directed. |
| 124 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; Cooler Stand, railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165 |
| 125 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. |
| 126 | M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed. |
| 127 | M&L applying two coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed. |
| 128 | Shortcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix(minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound/weak concrete material 25mm average thickness from slabs, beams, columns etc with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@6 sqm/ltr at DFT of 100 microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.Note : After completion of shorcreting the splash of cement on wall to be cleaned completely. |
| 129 | M&L for Shotcreting 25MM thick in RCC Facias, beams n.exc 450 mm in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from RCC Facias, beams with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specificationsincluding fixing hard drawn steel wire fabric not exceeding 4 Kg / Sqm cut to lengths, bent to shape required and disposal of debries for all lead and lifts complete all as specified and directed by Engineer-in-Charge |
| 130 | S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement all as specified & directed by Engineering-in-Charge. |
| 131 | M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer - in - Charge . |
| 132 | S & F nameplate for quarter number, made from a minimum 1mm thick stainless steel sheet of size 10\" x 5\" (250mm x 125mm). The quarter number, which may consist of any number of digits, stops, commas, short lines, dashes,etc. (upto max of 7 characters) as per site requirements, shall be painted using stencil or screen-printing method for durability and clear visibility. The letter height shall be uniform across all quarters, with a standard size of 3\" (75mm). The nameplate shall be securely fixed with four stainless steel screws (one at each corner) at designated locations as directed by the Engineer-in-Charge. |
| 133 | Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge.Note: Rate for making good shall be deemed to be included in above item rate. |
| 134 | Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd |
| 135 | Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked)drawn through andincludingPVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxesand for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3)complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).Note :- Cost of inner/outer plate for fixing the switch is included in the quoted rate. |
| 136 | All as per Item No. 135 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 137 | All as per Item No. 135 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed.(socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 138 | All as per Item No. 135 above here in before but for One light point controlled by two 2-way switches of 5 amps (switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 139 | All as per item No. 135 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.(switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. |
| 140 | Supply only modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. |
| 141 | Supply only modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge. |
| 142 | Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. |
| 143 | Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. |
| 144 | Supply only modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. |
| 145 | Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, . |
| 146 | M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed. |
| 147 | Supply only modular Fan regulator, single pole, one waycomplete all as specified and as directed by Engineer-in-charge. |
| 148 | S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed. |
| 149 | S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed. |
| 150 | S& F plug and socket type DB (Functional unit)20 Amps capacity with provision of single pole 20 amps MCB,plug top and earth plug,grouted flush to walls complete all as specified. |
| 151 | S&F Electric bell ding dong complete all as specified. |
| 152 | Supply only modular Bell Push switch, 5Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. |
| 153 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 12 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified and directed.. |
| 154 | S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. |
| 155 | Supply and fixingLED light fitting 1 x 8/10Watt, appx 2 feet long LED lighting fixture with extruded polycarbonate environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting,complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95(e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) CRCA pre coated housing with plastic end cap.(h) LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection minimum 2.5 kV.(l) CCT : Minimum 6000K(m) CRI : Minimum 80(n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) |
| 156 | S & F LED backup/Rechargeable tube light polycarbonate housing 1x18/20 watt, appx 4 feet long module complete all as specified and directed |
| 157 | Supply & fixing auto ON /OFF motion sensor lamp holder (convert any bulb to automatic) (bulb OFF time adjustable) No day/Night Sensing ,LED Electric lamp 9 Watt, maximum range 4 meter wall mounted PVCcomplete all as specified & directed, . |
| 158 | S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge |
| 159 | S&F for WEE Plus LED Bldg security light luminaire of capacity 35 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge |
| 160 | M&L forsubmain wiring comprisingsingle core ,2 Runs of 10 sqmm nominal cross sectional areamultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete,including provision of 1 x 10 sqmm nominal cross sectional areamultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earthwirecomplete incl taking down old UNSV sub main all as specified.( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 161 | Taking down carefully, dismantling ceiling fan of any make sweep and size and complete mtrl of the ceiling fan to be deposited to BSO yard E/M section store and fixing the old/new ceiling fanwill be issued from sch \"complete all as directed by Engineer-in-Charge. |
| 162 | Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to280V), BLDC type with remote, 26 watt, 5 star rated, BEE and ISI Marked super enamelled, copper winding of \"B\" class insulation, single phase, maximum 26W (± 10%), Temperature rise 40 degree maximum with remote, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable sizefrom ceiling rose to fan complete all as specified.Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account |
| 163 | Supply and fix electric water heater, storage type steel body with heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc all as specified |
| 164 | M&L for making holes for Exhaust fans/Air freshener for size of 250/230mm dia and filling the old holes with suitable material and making good surface and finishing, painting with existing colour and cleaning the stie complete all as specified and directed |
| 165 | Labour only for Taking down andfixing Exhaust fan/ air freshener fan issued by department and unserviceable items of the same to be deposited with AGE E/M store as directed by Engr-in- Charge. |
| 166 | Supply and fixing Air freshener fanPVC body, AC single Phase 230V, 50 Cycle per second, size 250mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 167 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5core complete all as specified and as directed by Engineer-in-charge. |
| 168 | Excavation in trenches in any type of soilnot exceeding 1.5 mtr deep and notexceeding 1.5 mtrwide for laying of cables, RCC/Steel tubular poles/staysand struts etc getting outincluding trimmingsides and forming bottom surface all as specifiedand directedat site. |
| 169 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 170 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 171 | Supplying and laying DWC pipe of outer dia 77 mm and inner dia 63 mm for LT cable complete all as specified and directed by Engr - in charge |
| 172 | S&F 20 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete allas specified and as directed by Engineer-in-Charge.. |
| 173 | S & F stop valve size 20 mmcast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 174 | Dismantling and taking down of existing solar heating system along with connected items viz Flat collector plate, master solar plate, hot water tank, pipelines all types, valves , including iron stand and other items and refixing the same with necessary repair to the solar heating system items and leakage of pipelines and making the solar system functional all as directed by Engr-in-Charge. Note : 1. Replacement of heating element of 2 KW and thermostat deemed to be included in the unit rate quoted by contractor. 2. Any leakage of incoming and outgoing pipeline connected to solar system to be repaired or if necessary replacement upto 20 Mtr of 20 mm GI pipes deemed to be included in the unit rate quoted by contractor. |
| 175 | Supply and fix LT Main control board of CRCA sheet metal board made out of 2.0mm thick and painting with 2 coats with synthetic enemel paint over a coat of red oxide primer including copper bus bar and fixed on/inside wall for fixing arrangement of existing smart meter incl internal connection with suitable size of copper conductor wire, and accessories, locking arrangement with opening handle (size not less than of box 120cmx100cmx35cm and adequate depth for the following equipments,internal wiring and termination of external cables, lugs and glands and conduit as required) including Taking down existing Old Unserviceable main control board comprising of following :- (a) Incoming :- MCCB 100 Amps, 4 Pole,415 Volts, 16 KA-01 No(b) Copper Bus bar 200 Amps for phase and neutral and earth bar(c) Out going RCCB double pole 30mA25 Amps - 6 Nos(d) Out going MCB SPN 10 Amps - 1 No |
| 176 | Supply and fix light grade 50 mm GI pipe fixed complete to wall, poles etc with suitable clamp for protection of cable complete all as directed by Engr-in-Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
