|
| 1 | Supply, installation, testing and commissioning of 4MP IP Bullet Camera with 1/3″ 4MP progressive scan CMOS image sensor or better, capable of delivering resolution of 2688 × 1520 at 25/30 fps or better, equipped with fixed lens of 3.6 mm or 4 mm, F1.6, M12 mount or better, supporting night vision with IR range up to 30 metres with Smart IR, minimum illumination of 0.06 lux in color, 0.006 lux in B/W and 0 lux with IR on or better, dual stream capability, built‑in microphone for audio, bit rate control with VBR/CBR, supporting standard network protocols including IPv6, IPv4, DNS, RTCP, NTP, RTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, UDP, ICMP, IGMP, SSL, DHCP, SMTP and RTSPS, ONVIF compliant with profiles S/G/T, certified to ISO 9001:2015, ISO 20000‑1:2018, CE, FCC, RoHS, BIS and STQC standards, powered through PoE or 12V DC, with IP67 weather protection, complete in all respects as directed by the Engineer‑in‑Charge.(Approved Make -CPplus,Honeywell,Prama,Matrix or equivalent) |
| 2 | Supply, installation, testing and commissioning of 64 Channel Network Video Recorder (NVR) supporting 64 channels with maximum recording resolution of 4MP or better, equipped with advanced video compression technologies H.265+, H.265, Smart H.264+ and H.264, supporting minimum four SATA ports each up to 10TB or better, providing video outputs through two HDMI and two VGA ports, having two RJ‑45 Gigabit Ethernet ports (10/100/1000 Mbps) for network connectivity, enabling remote access through mobile and PC, supporting standard protocols including HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, SNMP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, ONVIF, SDK and CGI, certified to CE, FCC, RoHS, BIS and STQC standards, powered by single AC input 100~240V, 50/60 Hz, complete in all respects as directed by the Engineer‑in‑Charge.(Approved Make - CPplus,Honeywell,Prama,Matrix or equivalent) |
| 3 | Supply, installation, testing and commissioning of 8‑Port PoE Switch with 2 SFP uplink slots, providing eight Gigabit RJ45 ports compliant with IEEE 802.3af/at standards, two Gigabit SFP uplink slots, with a minimum PoE power budget of 65W (8W per port or better), supporting port speeds of 10/100/1000 Mbps, Layer‑2 managed features including VLAN and QoS, powered through universal AC input 100~240V, 50/60 Hz, complete in all respects as directed by the Engineer‑in‑Charge.(Approved Make - D-Link, Netgear, CP Plus or equivalent ) |
| 4 | Supply, installation, testing and commissioning of SFP Module of single‑mode type, operating at wavelength of 1310 nm, with transmission range of 10 km or better, equipped with LC‑LC connector, supporting data rate of 1 Gbps, fully compliant with IEEE 802.3z standards, complete in all respects as directed by the Engineer‑in‑Charge.(Approved Make - D-Link, Netgear, CPplus or equivalent ) |
| 5 | Supply, installation, testing and commissioning of Surveillance‑grade Hard Disk of capacity 10TB or better, with SATA III (6 Gb/s) interface, 3.5‑inch form factor, minimum 64 MB cache, 5400 RPM speed optimized for continuous video recording, supporting up to 64 camera streams simultaneously, with maximum operating temperature of 65 °C, suitable for use in NVRs with multiple SATA bays, complete in all respects as directed by the Engineer‑in‑Charge. (Approved Make - seagate,western digital toshibaor equivalent ) |
| 6 | Supply, laying, testing and commissioning of Outdoor CAT‑6 cable of 4 twisted pairs with solid bare copper conductor of 23 AWG, suitable for Gigabit Ethernet applications up to 100 metres, conforming to ANSI/TIA‑568‑C.2 and ISO/IEC 11801 standards, RoHS compliant, with UV‑resistant waterproof polyethylene jacket for outdoor installation, impedance 100 Ω ± 15%, operating temperature range −20 °C to +75 °C, fire rating CMX/CMR/LSZH as required |
| 7 | Supply, laying, testing and commissioning of Single‑Mode Fiber Optic Cable of 4‑core construction, armored sheath type suitable for outdoor and underground installation, manufactured with UV‑resistant and water‑blocking materials, conforming to international standards ISO/IEC 11801 and ITU‑T G.652D, RoHS compliant, designed for long‑distance high‑speed data transmission, with operating temperature range of −20 °C to +75 °C, complete in all respects as directed by the Engineer‑in‑Charge. |
| 8 | Supply, installation, testing and commissioning of fiber termination and accessories including factory‑terminated or field‑terminated LC connectors, fiber patch cords, pigtails, fiber distribution box/LIU with splice trays, protection sleeves, and necessary consumables, suitable for single‑mode 4‑core armored fiber cable, ensuring proper termination with LC‑LC connectors for SFP modules, conforming to ISO/IEC 11801 and ITU‑T G.652D standards, RoHS compliant, complete with all accessories required for integration with switches, NVR uplinks and surveillance network backbone, complete in all respects as directed by the Engineer‑in‑Charge. |
| 9 | Supply, installation, testing and commissioning of Galvanized Iron (GI) Pole of 5 metres (5000 mm) height, fabricated from heavy‑duty galvanized iron material duly galvanized for corrosion resistance, complete with base plate, foundation bolts and necessary accessories for secure outdoor installation, suitable for mounting IP cameras and associated surveillance equipment, integrated with outdoor CAT‑6 cabling and fiber termination as per system design, complete in all respects as directed by the Engineer‑in‑Charge. |
| 10 | Supply of materials, preparation of site, excavation, casting of reinforced cement concrete foundation and grouting for installation of galvanized iron poles of 5 metres height, including base plate fixing, anchor bolts, shuttering, curing and finishing, using standard grade concrete mix (M20 or better), complete with all labour, tools and accessories, ensuring proper alignment and stability of poles for mounting of surveillance cameras and associated equipment, complete in all respects as directed by the Engineer‑in‑Charge. |
| 11 | Supply, installation, testing and commissioning of 4U Outdoor Rack suitable for wall‑mounting or floor‑standing installation, fabricated from heavy‑duty steel with powder‑coated finish, weather‑proof and dust‑proof enclosure with minimum IP65 protection rating or better, equipped with front and side lockable doors, ventilation provisions, cable management accessories and mounting hardware, designed to house NVR, PoE switches, fiber termination units and associated surveillance equipment, complete in all respects as directed by the Engineer‑in‑Charge. |
| 12 | Supply, installation, testing and commissioning of Camera Junction Box suitable for outdoor IP bullet/dome cameras, fabricated from weather‑proof and dust‑proof material with IP65 protection rating, equipped with cable entry points, mounting hardware and internal space for connectors, designed to securely house terminations of CAT‑6 cable, power supply and accessories, ensuring neat installation and protection against environmental exposure, complete in all respects as directed by the Engineer‑in‑Charge. |
| 13 | Supply, laying, testing and commissioning of Outdoor Power Cable of 3‑core construction, copper conductor type, insulated and sheathed with UV‑resistant and weather‑proof material suitable for outdoor installation, conforming to IS/IEC standards for electrical safety, designed for reliable power supply to surveillance equipment including cameras, NVR, PoE switches and associated accessories, complete in all respects as directed by the Engineer‑in‑Charge. ( finolex, KEI, polycab or equvalinet ) |
| 14 | Supply, laying, testing and commissioning of High Density Polyethylene (HDPE) Pipe of suitable diameter (minimum 32 mm outer diameter or as required), manufactured from virgin grade PE‑100 material, conforming to IS 4984/ISO standards, with minimum pressure rating PN‑6, black in color with co‑extruded blue stripes, supplied in coils/lengths, designed for underground or outdoor installation to provide mechanical protection for fiber optic cable, CAT‑6 cable and outdoor power cable, UV‑resistant, corrosion‑proof and impact‑resistant, complete with necessary couplers, end caps and accessories, complete in all respects as directed by the Engineer‑in‑Charge. |
| 15 | Supply, installation, testing and commissioning of 1 KVA On‑Line UPS with true double‑conversion technology, input voltage range 160–300 VAC, output voltage 230 VAC ±1%, frequency 50 Hz ±0.5 Hz, power factor ≥0.8, equipped with automatic bypass, LCD/LED display for status monitoring, microprocessor‑based control, inbuilt protection against overload, short circuit and surge, with sealed maintenance‑free (SMF) batteries providing minimum 30 minutes backup at full load, complete with rack/stand mounting accessories, suitable for continuous operation of NVR, PoE switches, fiber termination units and associated surveillance equipment, complete in all respects as directed by the Engineer‑in‑Charge. |
| 16 | Supply, installation, testing and commissioning of Earthing System for Surge Protection, comprising earth electrode of hot‑dip galvanized iron pipe (minimum 2.5 m length, 40 mm diameter) or copper plate electrode (600 mm × 600 mm × 3 mm), installed in a masonry chamber with cover, provided with charcoal and salt filling, watering arrangement and protective cover, connected with copper strip/earth wire of suitable cross‑section (minimum 25 × 3 mm copper strip or 8 SWG copper wire) for effective discharge of surge currents, conforming to IS:3043 and IEC standards, designed to protect UPS, NVR, PoE switches, outdoor racks, poles and surveillance equipment against lightning and electrical surges, complete in all respects as directed by the Engineer‑in‑Charge. |
| 17 | Installation, testing and commissioning of complete IP‑based CCTV Surveillance System, including mounting of IP cameras on GI poles and junction boxes, laying and termination of CAT‑6 and single‑mode fiber optic cables through HDPE pipes, installation of outdoor racks, PoE switches, SFP modules, NVR, surveillance‑grade hard disks, UPS, power cabling and earthing for surge protection, integration of all components with proper labeling, patching and configuration, ensuring seamless connectivity between field devices and control room, conducting functional tests for video recording, playback, remote viewing and system alerts, providing as‑built documentation and handing over the system in fully operational condition, complete in all respects as directed by the Engineer‑in‑Charge. |
| 18 | Supply, installation, testing and commissioning of 27” LED Monitor, Full HD (1920 × 1080) resolution, HDMI and VGA input, inbuilt speakers, suitable for 24×7 CCTV monitoring and playback, complete with stand/wall‑mount accessories, complete in all respects as directed by the Engineer‑in‑Charge. |
