|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group B |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit as required. (3 x 1.5 sq. mm) |
| 4 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit as required. (3 x 4 sq. mm) |
| 5 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (25 mm) |
| 6 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6 A switch) |
| 7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (3 pin 5/6 A socket outlet) |
| 8 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (4 Module (125mmX75mm)) |
| 9 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (6 Module (200mmX75mm)) |
| 10 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (12 Module (200mmX150mm)) |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 12 | Supplying and fixing 3pin, 5A ceiling rose on the existing junctionbox/woodenblockincludingconnectionsetc.as required. |
| 13 | SupplyingandfixingPVC batten/angle holderincluding connections etc. as required. |
| 14 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\"curve including connections, painting etc. as required. |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 16 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (8 way (4 + 24), Double door) |
| 17 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar,interconnections,powderpaintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator) (16 way, Double door) |
| 18 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of followingpolesintheexistingMCBDBcompletewith connections, testing and commissioning etc. as required. (Single pole) |
| 19 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(63 Amp) |
| 20 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (6 Amp) |
| 21 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 22 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 23 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (3Y X 35 sq. mm (32mm)) |
| 25 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (63 mm dia (OD-63 mm & ID-51 mm nominal)) |
| 26 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 27 | Supplying and Fixing of 22 WLED Batten, type 6500k luminaire coolday, 4 feet Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmentalfriendly, energy efficient suitable for surface/Pendant mouting i/c all accessories of make-Havells/Philips/Crompton or similar approved by Engg-incharge |
| 28 | Providing,installing,testing and commioning of High performance 2x2 recess mounted luminaires which suites various ceiling types designed Modular High Efficacy LED luminaire with specialized High transmittance duel/multi-layer prismatic optics for glare free symmetric light distribution offering excellent visual comfort with UGR levels of less than 19. 42/45 W 6500K, 230 volt,65mm depth housing with IP40 protection, directly on celling,including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make - Philips/Cromption/HavellsEquivalent specification. |
| 29 | Providing,installing,testing and commioning of High performance Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution 24 W 6500K, 230 volt, 190 mm Dia housing, directly on celling,including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make - Philips/Cromption/HavellsEquivalent specification. |
| 30 | Providing and Installation of 380 mm, 900 Rpm, 230 volt,Turbo Force exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(Make- Havells/Crompton/Orient) |
| 31 | Providing and Installation of 230 mm, 230 volt,Ventil Air DSP Green exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(Make- Havells/Crompton/Orient) |
| 32 | Providing,installing,testing and commioning of New generation energy saving & environmental friendly, long life, High-pressure die-cast aluminium housing Flood Light with toughened Glass cover, IP 66, 50 Watt, 6500K, 230 volt, directly on wall,including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make - Philips/Cromption/HavellsEquivalent specification. |
| 33 | Providing and Laying of one number PVC insulated and PVC sheathed / XLPE power cable one number aluminium conductor, XLPE Insulated, armoured power cable of 1.1 KV grade , confirming to IS : 7098 (Part-1) 1988 of following size of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required. (3.5x 35 sqmm Aluminium conductorarmouredcable ) |
| 34 | Supplying and Fixing of 9/10 WLED Batten, type 6500k luminaire coolday, 2 feet Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmentalfriendly, energy efficient suitable for surface/Pendant mouting i/c all accessories of make-Havells/Philips/Crompton or similar approved by Engg-incharge |
