|
| 1 | Construction of new rest room and providing cover slab at Ammonia handling area in FACT (CD), Ambalamedu. |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 3 | Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl.instructions |
| 4 | Dismantling and removing windows with or without ventilators including removal of shutters hinges holdfasts all other fittings and stacking materials as per deptl.instructions |
| 5 | Demolishing C.C/ R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge |
| 6 | Earth work excavation in all classes of soil including narrickal but excluding hard rock which require blasting including back filling in basement & sides of foundation, depositing on bank within an initial lead of 50 m including breaking clods, watering, ramming and sectioning of spoil bank etc.complete upto 1.5m depth from ground level. |
| 7 | Cement Concretework in 1:1½:3 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete including cost of cement but excluding cost of form work & reinforcement works.For foundation footings, bottom & sides of trenches, equipment foundations, plinth beams, lintels, slabs, columns & beams etc.up to 5 m from ground level. |
| 8 | Cement block masonry work in CM 1:6 using good quality, approved cement blocks including charges for conveying, scaffolding charges etc\"as per departmental instructions for super structure walls up to 5 M height from ground level/ floor level, including cost of cement. |
| 9 | Providing reinforcements to RCC works with MS / Tor steel rods including all charges for conveying, straightening/uncoiling, cutting, bending, placing rods in position & tying with GI / black annealed tying wire of suitable gauge etc. complete.including cost of reinforcement |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness),including attached pilasters,buttresses,plinth and string courses etc., |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors,roofs,landings balconies and access platform |
| 12 | Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,including cost of cement |
| 13 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls cement based high polymer modified quick-set tile adhesive(Water based)conforming to IS:15477, in average 3mm thickness. is followed by grouting the joints of flooring tiles having joints of 3mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 14 | Providing and laying with approved brand rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS:15477, in average 3mm thickness.with adequate joint spacing of 3mm followed by grouting the joints of flooring tiles having joints of 3mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 15 | Supplying and fixing anodized Aluminium frame work of extruded sections and approved brand / manufacturer including mitering the joints, fixing the frame work with necessary screws, drilling holes in floors/walls, providing plugs for fixing screws, finishing the sides of packing between frame work and walls with plaster of Paris, cost of timber packing if necessary, Rubber lining for air tightness, providing corner cleats etc.complete as per standard practice for glazed Doors, Windows, Partitions, Ventilators etc.including hinges ,pivots, tower bolts, fixtures etc.complete(All Aluminum fittings measured in Kg) |
| 16 | Glazing the Aluminium frame work of windows with 3 mm or nearest thick plain glass panes and anodized Aluminium approved brand beadings, with EPDM/NEOPRINE weatherseals,gaskets of EPDM or PVC etc and screws as per standard practice at all levels(Measurement for overallarea of doors / windows /ventilators) |
| 17 | Glazing/Panelling the Aluminium frame work of doors/other areas with 5.50 mm glass and 4 mm thick hylam sheets (40% hylam sheet aproximate)and powder coated Aluminium approved brand beadings, with EPDM / NEOPRINEweather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors/other area) |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 2km and lift upto 1.5 m. |
| 19 | Applying water thinnable cement primer one coatfor exterior and interior wallsof approved brand and manufacture at all heightsincluding cost of all labour ,materials and scaffolding charges. |
| 20 | Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well. |
| 21 | Providing JCB Excavator or similar equipment for the removal of earth, waste, debris etc.including equipment hire charges, fuel charges, and operator’s charges etc.complete. |
| 22 | Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings(twopiece) to PVC trap as per instructions at site. |
| 23 | Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1 No. 15mm heavy type CP brass pillar tap of approved make 1no.heavy type 15mmPVC connection and 1No.15 mm CP regulating valve of superior make,1No. 15 mmCP waste coupling,32 mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making goodthe walls,etc. complete. |
| 24 | Supplying and fixing at all levels approved quality /brand European type vitreous china white glazedwater closet pan with P/S trap andWhite/Black duro plastic seat and lid with CP brass hinges and CP rubber buffers, 10 litre capacity PVC low level flushing cistern of approved makewith all fittings 1No.32mm CP brass flush bend, 1No:15mm superior PVC connection heavy type ,15mm CP regulating valve,cutting and making good the walls and floorsincluding giving connection to sewer pipe with all necessary specials,etc. complete as per direction at site. |
| 25 | Supplying to civil store PVC high level flushing cistern of 10 Ltr. Capacity of approved make and quality with all required arrangements viz, 1 No. 32 mm PVC flush pipe with learning nut, 1 No. 15 mm superior make 15 mm GM float valve & inlet connection etc.complete. (of make CERA,JOHNSON,KHAJARIA or equivalent) |
| 26 | Supplying Angle valve with wall flange of standard range (CERA,JOHNSON or equivalent) |
| 27 | SupplyingLong body bib cock of standard range CERA/JOHNSON orequivalent type. |
| 28 | Supplying and fixingHealth faucets of standard range approved by Engineer-in-Charge(CERA,JOHNSONor equivalent brand). |
| 29 | Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors,sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry whereverrequired and painting the clamps with two coats of enamel paint over one coat primer.This includes testing of joints complete at all levels. for waste water lines:110mm or nearest outer diameter. |
| 30 | Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union,reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete-25 mm OD Pipe. |
| 31 | Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panelhollow plastic section of20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40mm or nearestincludingproviding and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications. |
| 32 | Providing labour assistance for emergency works which are not covered in the Schedule of work-Man Mazdoor. |
