Tender For Special Repair To Certain Offers Md Accommodation At Sp Marg Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

TDR : 53427239

Tender Notice
BOQ

28 Days Left

Delhi , Delhi

Tender Brief : Tender For Special Repair To Certain Offers Md Accommodation At Sp Marg Under Ge New Delhi, Delhi Cantt-10

Document Fees
₹ 3000 /-

EMD
₹ 580500.0 /-

Tender Value
₹ 5.11 Crore /-

Submission Date
11-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
2	M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed .
3	Providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center& sealing to same complete all as specified and directed.
4	Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and directed.
5	M&L for reinforced cement concrete (1:2:4) type B1 (Nominal mix)(20 mm graded stone crushed aggregate) as in fins, slab ,facias, louvres, parapets, and railings, newels, balustrade, and the like complete all as specified and directed.
6	S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed.
7	S&F 8mm dia TMT bars, cut to length bent to shape requiredincluding cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed.
8	M&L Formwork to edges of concreteflats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cmwide, fair finishes complete all as specified and directed
9	M&L Formwork to soffits of suspendedslabs such as roof slabs, floorslabs, landings and similar work;not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed.
10	M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel reinforcement and applying antirust chemicals or any other required chemicals and providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 43 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 25 metre height) complete all as specified and directed at site.Notes :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b)When polymix concreting in taking condition,guniting is done with polycretes admixture @ 2% by weight of cement all as per manufacturers instructions (polycretes admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
11	S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or weldingsupplied and fixed complete to wood or steel members complete all as specified and directed.
12	M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars complete all as specified and directed.
13	M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 14 mm dia hole suitable for inserting 10 mm dia reinforcement bars all as specified & directed.
14	M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars complete all as specified and directed.
15	S&F TMT bars 5 mmdia upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips includingU-shaped stirrups with necessary welding required at site complete all as specified and directed.
16	M&L for Providing & Pouring Micro concreting M-40 grade complete all as specified and directed :-(i) Dry concrete substrate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : Master Emaco S46T of BASF or equivalent in FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note :-Form work shall be 100% leak proof. The cost of micro concrete M-40 grade & Epoxy bond coat is included in this item.
17	M&L for old size brick work with sub class \"B\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to seven story Bldg) complete all as specified and directed.
18	M&L for old size brick work with sub class \"B\" bricks , straight or curved on in half brick thick wallbuilt in cement mortar (1:4),(up to seven story bldg) complete all as specified and directed.
19	M&L for Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete all as specified and directed.
20	M&L for Demolition of mud in roof, any thickness, including plastering and leaping up to seven story bldgs. incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of and removing from cantonment area or as directed complete all as directed by Engr in charge and specified.
21	M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to six storied Bldg, using water proofing compound as per manufacturer instruction complete all as specified & directed.Note:- Water proofing compound shall be measured and paid separately.
22	M&L for APP based polymeric membrane one side plain and one side rough finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints
23	S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.
24	M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and directed.
25	Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in cement mortar complete all as specified and directed
26	M & L for18-20mm thick granite/quartz table rubbed and polished in wall lining, , fixed with 15 mm thick screed bed in cement mortar 1:3 complete all as specifed and directed Note:- Additonal 75 mm width patti shall be measured separately.
27	M & L for18-20mm thick granite/quartz table rubbed and polished AS in cooking platforms, fixed with 20 mm thick screed bed in cement mortar 1:4 complete all as specifed and directed Note:- Additonal 75 mm width patti shall be measured separately.
28	M&L fordrilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite/quartz complete all as specified and directed.
29	M&L fordrilling holes for pipes etc exc 25mm but n exc 60mm dia in brick hole complete all as specified and directed.
30	M&L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 15mm thick screed bed in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shadeincluding rounded edges with shade of granitecomplete all as specified and directed.
31	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
32	M&L for, double charged, super glossy/ hi gloss vitrified tiles light shade 9 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed cement mortar (1:4) complete all as specified and directed.
33	M&L for double charged super glossy/ hi gloss vitrified tiles (light shade) 9 to 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid on 10mm thick cement plaster in CM (1:3), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cementto match the shade of tiles complete all as specified and directed.
34	M&L 600x600mm non skid ceramic tiles matt finished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 including scantling complete all as specified and directed.
35	M&L 600x600mm non skid glazed ceramic tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 including scantling complete all as specified and directed.
36	M&L for super gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces600mmx1200 mmincluding provision of high lighter tiles/boarder and jointed in neat cement slurryand pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
37	M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed.
38	M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cementto match the shade of tiles complete all as specified and directed.
39	M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces450x300x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurryand pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.
40	S&F for bath room vanity unit of overall size 580x400x700mm (approx) with multiple cabins with outside openable two shutter made of water proof coating/items/with two nos of 100mm stainless steel handle with hinges and auto lock and 16-18mm thick black polish granite with counter type Table Top while ceramic basin of Size: 42x42x15 cm table mouted type including cuplink and waste pipe with stainless steel bottle trap of 32mm size with 250mm &long flexible tube & wall hook with NRV, bottle trap and all fittings to proper functional condtion complete all as specefied and directed. Make of WHB :- Jaguar model cat No JDS-WHM-25911 or Hindware cat No 91238 or Cera cat part No S2020153, kohler Cat No K-31459IN-0Make of Bottle trap:- Jaguar, Cera or Hindware
41	S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specefied and directed. Make:- Cat part No Hindware 92573, Jaquar Cat No WC OPS-WHT-15853S300UF, Kohlar Cat No ‎77739T-SL-0, Cera cat No A1014110
42	S&F in repair Vitreous China rimless wash down water closet pan wall mounted symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make:- Cat part , Jaquar Cat No WC KUS-WHT-35953BIUFSM, Cera cat No S1043148
43	S&F repair single piece concealed cistern 10 ltr capacity inlet ball valve float and handle including brackets complete all as specified and directed.Make:- CAT Part – JCS -WHT-2431AND Equivalent
44	S&Frepair flush plate for concealed cisterncomplete all as specified and directed.Make:- CAT Part – JCP-CHR-392415AND Equivalent
45	S&F Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, including Exposed and Concealed Part (diverter) Cartridge Sleeve, Wall Flange, Nipple & Spout suitable for basinincluding all fittings complete all as specified and directed.Make :- Jaquar cat part no OPP-CHR-15233NKPMM & ALD-235N, Kohler Cat No K-22540IN-4ND-CP, Hindware Cat Part No F570029CP, CERA Cat No F1023474 and F4065103
46	S & F Vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete. Squatting pan including connection to trap, and to flushing pipe, anti-siphonage pipe, etc. complete including making good to floor complete.
47	S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified and directed.Make , Cera CAT Part No B1020106, Cera CAT , KohlarCat Part No K-98100IN-CP.
48	S&F in repair , ABS body Health Faucet including flexible pipe of 15 mm bore and min1.00M long with and including 15 mm bore complete all as specified and directed.Make- Jaquar of Cat No ALD-CHR-573, Hindware cat No F160192CP, KOHLERCat No 12927IN-CP, CERA Cat No. : F8030107AB
49	S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed.Make Jaquar Cat No ACN-1151N, Kohler Cat No 5633IN, or Hindware cat NoF880003CP, CERA F5004110
50	S & F in repair Vitreous China wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. Cera CAT Part No S2040157, pedestal CAT Part No S2090101 Hindware Cat part No-10054, Ped-11018, Jaquar-cat part No CNS-WHT-811, Pedestal CNS-WHT-303
51	S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thickPVC sheet building board or commercial plywood with aluminium beading alround and fixed with steel screw complete all as specified and directed.
52	S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.
53	S & F in repair granite shelf assembly consisting o shelf 12 cm wide complete all as specified and directed.
54	S&F in repairs 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality complete all as specified and directed.Note:- Sample shall be approved by GE.
55	S&F in repair fancy type glass corner 300mm radius of 10mm thick toughened glass with CP railing fixed with screws fancy type complete all as specified and directed.
56	S&F in repair3 in 1 concealed single lever shower mixer,Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spoutwith 10 layersurface finished,Shower System owns a modern and stylish look . Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items all as specified by manufacture and directed. Make:- Jaquar Cat No ORP-10125PM , Hindware Cat No F570022CP, KOHLER K-98754IN-4-CP, CEARA cat No F1015403-2891
57	S&F in repairs Kitchen sinkmixer15mm dia CP brass fancy type including joints to steel pipe or unions complete all as specified and directed.Make:- Jaquar ARI-39309 , Make : Kohler Cat No 20591 IN-CP,CERA Cat No F1015501, Hindware Cat part No-F280020
58	S&F in repair Bib tab (spout) whilewith Wall Flange including taking out old existing all as specified and directed.Make:- Jaquar Model : code No OPP-15037PM, Hindware Cat Part No F340004CP, KOHLER Cat No : K-16093IN-4-CP, CERA Cat No F1013151
59	S&F in repair bib tap standard of CP any colour high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed.
60	S&F in repair fancy type brass chromium plated soap dish, complete all as specified and directed.Make:- CERA cat part no.F5004106, Jaquar Cat No ACN-1131N,
61	S&F in repair Angular Stop Cock with Wall Flange while complete all as specified and directed. Make :- Jaquar model OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat No 11568IN-7BCP, CERA CAT NO F1015201
62	S&F in repairs Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed.
63	S&F in repair stainless steel plate rack of size 60x60x25cm made with 1.0mm thick sheet including taking out existing plate rack complete all as specified and directed.
64	S&F in repair fancy type stainless steeltowel racksize 600mm X 300mm including a pair of brass bracket complete all as specified and directed.Make :- KOHLER Cat No K-25066IN-CP, Make Jaquar Cat No ACN-1181S, Hindware Cat NoF580008CP, CERA CAT F5003101
65	S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding a pair ofCP brass bracket complete all as specified and directed.Make :- Jaquar CPA-1121RD, Cera cat part no F5001105, hindware Cat. No.: F880007,
66	S&F in repair 12mmthick toughened desing/frosted glass as approved with powder coated 1.8mm thick frame work for partitionwith all fittings and fixing with SS screw etc complete all as specified and directed.
67	Dismantling of floor of size exc 1.5 Sqm and not exceeding 5.00 Sqm mtr for EWC water closetand removing out the cinder/concrete from sunken portion, grinding any sharp edges etc all as specified and directed with following:- (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top or equivalent of Fosroc or Pidilite & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I or equivalent of Fosroc or Pidilite and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus or equivalent of Fosroc or Pidilite as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 5.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
68	Dismantling of floor of size not exceeding 1.50 Sqm mtr for EWC water closetand removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following:- (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top or equivalent of Fosroc or Pidilite & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I or equivalent of Fosroc or Pidilite and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus or equivalent of Fosroc or Pidilite as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 1.50Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
69	Taking down (Door/window) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete.
70	Taking down shutter of any description exc 1.00 sqm but n.exc 2.00 sqm each complete all as specified and directed.
71	Taking down (Door/window) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
72	Taking down and refixing of shutters of size exc 1.00 sqm but n exc 2 sqm in sameopening including all necessary adjustments to fit the shutter with frame like easing of shutter for easy closing /opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.
73	M&L Cutting holes in brickwalls in mud mortar forinserting holdfasts and making good dismantled portion incement mortar 1:3 or cement concrete 1:2:4Type B-1 as required complete all as specified and directed.
74	S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
75	M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bendingin factory of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note:- Stainless Steel butt hinges shall be paid separately under relevant item.
76	M&L for providing 35mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with leaping and edge bending in factory consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm25mm2mm and 32mm long steel screws drilled suitable to pass through Other hardware should befixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & specified.” Note: Fixture/fittings shall be measured & paid under relevant item.
77	S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm modular of elasticity 900 N/mm2 and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension shall be acceptable variation in profile diamansion on plus side shall be acceptable but no extra payment on this account shall be made.
78	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with leaping and edge bending of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note:- Stainless Steel butt hinges shall be paid separately under relevant item.
79	M & L for Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with leapinng and edge bending in factory consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door/window to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm25mm2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item
80	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door/window shutter with leaping and edge bending in factoryof size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges shall be paid separately under relevant item.
81	Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed.
82	M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed.
83	S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
84	S&Ffactory made uPVC white colourfixed glazedwindow/ventilatormade of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, complete all as per approved drg and direction of Engr in charge. Note:- For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile shall be acceptable variation in profile shall be acceptable variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
85	Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body it single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed.Notes:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Glass and wire mesh shall be paid separately.
86	S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in uPVC door/window shutter, in square n exc 0.5 Sqm in each pane complete all as specified and directed.
87	S&F stainless steelwire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified and directed.
88	M&L 2nd class hardwood plain, solid, straight chowkhat and frames, wrought frames rebated on the solid rounded or chamfered put together with glue pinnes at joints complete all as specified and directed.
89	S&F 35 mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides. Flush shutters shall have teak wood edging as per IS, complete all as specified and directed.
90	M&L for two coats of synthetic enamel painton new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed.
91	M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paintall as specified and directed
92	M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.
93	M & L for preparation of old Steelsurfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified.
94	S&F 100mm long (size) butthinges, heavy weight stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed.
95	S&F in repair 100mm long (size) butthinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed.
96	S&F stainless steelAISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.
97	S&F in repairs 200mm long stainless steel barrel tower boltof extruded section, complete all as specified and directed.
98	S&F Magic eye and fixed to doors acomplete all as specified and directed.
99	S&F in repair Hasp and staple -100mm size, stainless steelAISI 304 grade safety type, including bolt to hinge plate, fixed with screws complete all as specified and directed.
100	S&F stainless steel drapery curtain rods gold or antique silver 25mm nominal dia and minimum wall thickness 1.20mm of SS-304 grade of approved brackets design as approved fixed in brick/ concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.
101	S& F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified and directed.
102	S&F 300mm long,stainless steelAISI 304 grade , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts andsliding bolts and fixed, complete all as specified and directed.
103	S&F in repair 300mm long, stainless steelAISI 304 grade , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts andsliding bolts and fixed, complete all as specified and directed.
104	S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified and directed.
105	S&F 150mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed.
106	S&Fin repair 150mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed.
107	S&F stainless steelAISI 304 grade floor door stopper withtwin rubber shoes double door stopper 75 mm long complete all as specified and directed.
108	S&F in repair stainless steelAISI 304 grade floor door stopper withtwin rubber shoes double door stoper 75 mm long complete all as specified and directed.
109	S&F100mm long extruded fancy D\" type type SS handle for kitchen cup boards shutters, cabinets, crockery shelf drawers fixed with nuts , screw and washer complete all as specified and directed.
110	S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed.
111	S&F 4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified and directed.
112	S&F 5.5 mm thicksheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller, complete all as specified and directed.
113	S&F in repair double aluminium channel size 10x20x2mm, complete all as specified and directed.
114	S&F 150 mm ordinary helical door springs incl roller & roller plate completeof mild steel complete all as specified and directed.
115	S&F, in repair, 150 mm ordinary helical door springs incl roller & roller plate of mild steel complete all as specified and directed.
116	S&F mortice lock of size min 100mm with Brass fancy type andvertical type 4 levers with key in duplicate complete all as specified and directed.
117	S&F in repairs mortice lock of size min 100mm with Brass fancy type andvertical type 4 levers with key in duplicate complete all as specified and directed.
118	S&F mortice night latchof size 100mm, 4 levers of brass complete all as specified and directed.
119	Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.
120	M&L cement concrete 1:4:8type D-2 (40mm graded stone aggregate)as in sub base , and mass concrete complete all as specified and directed.
121	Cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) in floors pavings etc finished even & smooth with out using extra cement complete all as specified and directed.
122	M & L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified and directed.
123	Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.
124	Taking up or down steel tubing and connections of 20mm bore complete all as specified and directed.
125	Taking up or down steel tubing and connections of 25 to 32mm bore complete all as specified and directed.
126	Taking up or down steel tubing and connections of 40 to 50mm bore complete all as specified and directed.
127	Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings ccomplete all as specified and directed.
128	Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified and directed.
129	Supplying and laying of CPVC 75 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified and directed.
130	Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.
131	Dismantling water tanks of capacity exceeding1000 litres but not exceeding 2000 litres complete all as specified and directed.
132	S&F 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.
133	S&F 2000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.
134	S & F PPR gate valve,for iron pipe 20 mm bore complete all as specified and directed.
135	S & F in repairs PPR gate valve,for iron pipe 75 mm bore complete all as specified and directed.
136	S & F in repair ofminimum 2mm thick collar and 1mm thick bowl modern square/rectangular stainless steelgrade 304 hand made sink with flat rim for kitchen or laboratory with plugs, washers and wastes fixed at modular kitchen over HDHMR board including all fixing arrangement including coupling with stainless steel bottle trap of 32 mm size with250mm, overall size minimuum 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed
137	S &F in repairstainless steel sink, 1.00mm thick forkitchen or laboratory, with plug, wastepipe, waste coupling, washers, including cantilever castironbrackets,connectingunionetc.,overall size 495mm x 420mm with bowlsize 410mm x330mm x 160mm complete all as specified and directed.
138	Dismantling of cast iron pipe of any dia (soil/waste/vent) with fittings etc fixed to walls, ceiling, on floors & from trenches if requiredincluding taking out any type of joints complete all as specified and directed.
139	S&F 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to floors or trenches, complete all as specified & directed.
140	S&F 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to wall, complete all as specified & directed.
141	S&F 100mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to floors or trenches, complete all as specified & directed.
142	S&F 100mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to wall, complete all as specified & directed.
143	S&F 75mm dia (bore of pipe) cast iron hubless Tee as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
144	S&F 100 mm dia (bore of pipe) cast iron hubless Tee as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber, complete all as specified & directed.
145	S&F, cast iron floor trap with Cockroach Proofing CP grating with or without hole includingjointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.
146	S&F Salt GlazedStoneWare (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified and directed.
147	S&F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm dia bore of pipes complete all as specified and directed.
148	S&F PVC (SWR) pipes single socketed, 50 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed.
149	S&F PVC (SWR) bends/Tees of any radius of50 mm bore complete all as specified and directed.
150	S&F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75mm dia bore of pipes complete all as specified and directed.
151	Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etcincluding removal of debris from the MOD land complete all as specified and directed.
152	M/L cement plaster 15mm thick inCM 1:4 on brick or conc surfaces(On external surfaces)even and fair finished without using extra cement complete all as specified and directed.
153	M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed.
154	M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.
155	M&L for preparation of the newly plastered surfaces of walls applying wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified, directed and following:-Notes:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
156	M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying cement base wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified, directed and following:-Notes:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
157	M&L for preparation of the newly plastered surfaces of ceiling applying wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats of distemper approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified, directed and following:-Notes:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
158	M&L for preparation of old decorated surface (plastered or unplastered) of ceiling by complete removal of existing treatment by mechanical grinder and applying cement base wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified, directed and following:-Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
159	M&L for preparation of newly plastered surfaces of walls/ceiling and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Notes:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
160	M&L for preparation of old decorated plastered surfaces of walls/ceiling, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.Notes:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.”
161	M&L for preparationfor wall by punning 5 mm thick POP with 2 coats of OBD on new wall surface will be done all as specified and directed as under:-(a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
162	M&L for preparation of old plastered or unplastered surface of ceiling and applying 3 coats of whitewash complete all as specified and directed.
163	Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
164	S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board leaping and edge bending in factory of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet/Kitchen & Cabinets
165	(FOR BELOW COUNTER CARCASSES) : Providing and fixing of machine crafted box type cabinet bottom unit 560mm depth having :- Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in .8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm tk. laminate of any color and on external side in 1 mm HI gloss Acrylic laminate of aapproved colour of Rehau make . Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed. Notes:-a). Soft close hinges shall be of make : Hettich, Hafele, Samsung Irexb). All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. c). All shutters to have Gola profiles for handleless shutters. d) .Basic price of the 1mm Acryic laminate shall not exceed Rs. 110/ sq.ft.
166	FOR ABOVE COUNTER CARCASSES : Providing and fixing of machine crafted box type cabinet and CNC cut as design approved by GE bottom unit 325mm depth having :- Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in .8 mm laminate of any colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of any colour. Visible side to be laminated with 1mm thick. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm thick. laminate of any color and on external side in 1 mm HI gloss Acrylic laminate of aapproved colour of Rehau make . Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed.Notes:- a). Soft close hinges shall be of make : Hettich, Hafele, Samsung Irexb). All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. c). All shutters to have Gola profiles for handleless shutters. d).Basic price of the 1mm Acryic laminate shall not exceed Rs. 110/ sq.ft. .
167	M&L SS 470mm long Pot and pan Innotech drawers complete all as specified and directed. Make : Hettich, Hafele, Samsung Irex
168	M&L 600mm PVC cutlery tray and pantry of aapx size 2mx0.5m along with 04 collapslble mech arrangement ss 304 trayof complete all as specified and directed.Make : Hettich, Hafele, Samsung Irex
169	M&L SS 600mm dish rack of complete all as specified and directed.Make : Hettich, Hafele, Samsung Irex.
170	M&L SS Detergent rack complete all as specified and directed. Make : Hettich, Hafele, Samsung Irex.
171	M&L SS 200 mm Bottle pullout complete all as specified and directed.Make : Hettich, Hafele, Samsung Irex.
172	S&F MS roller with \"C\" shape staple, chromium plated for 5.5mm thick sheet glass complete all as specified and directed.
173	S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed in repairs complete all as specified and directed.
174	S&F15mm mild steel, chromium platedrod with fixing brackets, fixed in cupboardsfor hanging cloth of adequate strength complete all as specified and directed.
175	S&F stainless steel AISI 304 grade handle of size 100 mm long, etc. complete all as specified and directed.
176	S&F Magnetic catch for wooden cupboard with complete closer mechanism claps and clips fix with stainless steel screw complete all as specified and directed.
177	M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified and directed (opening of shutter exc 2.00 m and not exc 3.50 m and area exc 6.00 sqm and n.exc 9.00 sqm)
178	S&F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complete all as specified and directed.
179	S&F in repair steel rolling shutters, thickness of lath 1 mm, with out ball bearing, top cover, anchoring rod and hasp & staple, erected in position where required (in patches or whole), complete push pull or manual type complete all as specified and directed.
180	S& F in repairs mild steel lock plate & handles made of of Flat iron 35 x 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primercomplete all as specified and directed.
181	S&F Continuous (piano) hinges width of flap 30 mm, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and directed.
182	S&F in repair stainless steel peg set of 6 peg, 45 centimeter long, complete all as specified and directed.
183	S&F powder coated aluminium (minimum thickness of powder coating 50 microns) sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and includingMS grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame section 116.0 x 25.0 x 1.40 mm, section No. . 21032 for top and sides rails and 116.0 x 25.0 x 1.40 mm for bottom rail, section No.20798.(ii) Shutter for top and side rails 50 X 25 X 1.20 mm, section No. 20707, bottom 50 X 25 X 1.20 mm, section No. 20639 and interlock section no 20741 size 50x25x1.3m (iii) Glass 5 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearingand necessary handles, tower boltetc. as directed.(iv) Stainless steel wire cloth(v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vi) Locking arrangement to make the frames air tight.
184	M&L for 5mm thick acrylic sheetof size 200mm x 300mmfixed on wall over suitable fastener border over the stonefor building insignia (letter size ht 100mm and 50 mm width)for numbering Qtrs complete all as specified and directed.
185	Cutting shrubs, wild growth, plants not exc 30 cm girth grown on permanent structures and removingsame from roots and stopping the recurrence by injecting herbicide Glyphosate 4+solution (04 % concentrate) into plant root to eliminate further growth. Application shall be as per manufacturer instructions. The disturbed area shall be repaired with PCC (1:2:4) Type B0 mix and surface finished even and smooth in cm 1:4 incl applying two coats of matching finish of adjacent area,Minimum plant in each block is 10 Numbers complete all as specified and directed.
186	M&L for followings complete all as specified and directed :-(i) Removing plaster & finishes all around the columns, slabs & beams.(on all four side of column to full height , three sideof beam to entire span & bottom of slab to area as directed)(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved. Supply & applying of rust removing chemical to remove rust from existing reinforcements.(The Engr-in-charge may order sand blasting if rust is visible)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out.
187	M&L for providing PMM (Polymer modified cementitious mortar) complete all as specified and directed. :-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer.
188	S&F powder coated aluminium Door sealnot less than 1.00 mtr long with fine fibres suitable for fixing in doors complete all as specified and directed.
189	Dismantling A.C/Fibresheet corrugated or semi corrugated sheet in roof coverings complete all as specified and directed.
190	S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
191	M&L cleaning RCC OHT of capacity upto 20,000 Ltrs cleaning walls & floors of tanks by wire brushing & gunny bags etc removing all scale, dirt & mud etc and removing out side the MOD land including washing with bleaching powder food grade epoxy complete all as specified and directed.
192	M&L for heavy duty groove Tiles for Commercial & Public Parking of size 600x600 and minimum 12 mm thick suitable for high traffic and max grip and non skidetc set and jointed in neat cement slurry and using 3 mm thick pressure and fill epoxy on tile joint over 20mm thick screed bed in CM 1:4 complete all as specified and directed.
193	Forming Jambs etc to opening incl cutting toothing and properly bonding in to old work complete new work built in CM 1:4 complete all as specified and directed.
194	Cutting holes in bricks walls built in cement mortar or cement lime mortar or stone walls built in lime mortar for inserting hold fasts and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4type B-I exc. half brick but not exc one brick complete all as specified and directed.
195	M&L for 50mm thick precast cement concrete, type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in louvres & jallies ( measured solid), set in CM 1:4, complete all as specified and directed.
196	Dismantling timber in fillets, rails posts rafters, purlins etc under 40 sqcm in section in unframed work complete all as specified and directed.
197	M&L for 2nd class hard wood ,plain fillets square, rectangular or triangular in section exc 13 & n.exc 25 sqcm in section, wrought, secured with nails complete all as specified and directed.
198	S&F, in repairs,wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified and directed.
199	M&L for 16 to 18 mm thick granite stone of size 3fitx2fit fixed on wall over 15 mm thick screed bed in cement mortar 1:4 and ingraved flat Nos and border over te stone for building insignia (letter size 3\"x2\") complete all as specified and directed.
200	S&F stainless steel 304 grade modular railing system comprising dia 50mm S.S handrail fixed on 50mm dia SS round balustre with necessary Accessories, 25mm dia two nos Horizatal Members, 16 mm SS vertical members and all necessary fixtures . the balustrade would be fixed on to the floor with 100mm dia X 8mm thick 304 grade base plate with 4 Nos M10X100 mm anchor fastener are not visible after installation, wall thickness of handrail, balusters, vertical members and horizontal members/mid rail shall be 2mm along with all with visible components developed in high grade SS & wherever required joints to be filled with modular bend, railing height to be taken @ 1100 mm from finish floor level and as required in window grill complete all as specified and directed.Make :- KICH, Qrail, D-line GEZE
201	S & F 100 mm dia (bore of pipe) cast iron hubless bends as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
202	S & F 75 mm dia (bore of pipe) cast iron hubless bends as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
203	All as per Srl item No 201.00 above but fitted with hubbless oval access door as per IS -15905:2011 for 100mm dia (bore of pipe)
204	All as per Srl item No above 202.00 but fitted with hubbless oval access door as per IS -15905:2011 for 75 mm dia (bore of pipe)
205	S&F PVC coloured sheet strips of 3 to 4 mm thick of size450 mm x 150 mm with embrassing house Noin three digitsincluding fixing the sheet to wall at appropriate location, with rawl plug and screws complete all as specified & directed. Note:-The exact location of sheet shall be decided by the Engineer-in-Charge.
206	S&F in repair 5mm thick modern mirror of size 600x750mm fixed on decorative PVC cabinet withborder design suitable for wash basin cabinet with fitted with LEDFront and Backlight, Stepless Dimmable Wall Mirrors with Anti-Fog, Shatter-Proof, Memory, 3 Colors, Double LED Vanity Mirror with touch off/on switch in one mirror including all fixing arrangement complete all as specefied and directed.
207	M&L for packing (incl bubble wraps and card boards or any material required) and transportation of luggage (approx 6tonne) by truck within 10 km radius to include:-(a) removal from old location and fixing such as AC (01) (split / window AC), TV (01) , Washing machine (-1), RO (01), Dish Antenna (01), Dish Washers (01) at new location transportation. (b) Transporation of 2 wheelers and four wheelers not included.
208	Taking out old serviceable glass of any description exc 1.05 sqm, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size, hacking out old putty or removing beads etc, incl making good breakages in taking out and handling removing to store or stacking for reuse complete all as specefied and directed.
209	S&F 12mm thick toughened design/ frosted glass as approved with SS 1.8mm thick metalic frame work for partition including one top hang sliding door with all fittings such as handle, roller,hinge etc and fixing with SS screw etc and all joints shall be filled with silicon/ appoxy complete all as specefied and directed.
210	Supply only 32 mm dia 400 mm long fancyhandle suitable for glass door complete all as specified and directed.
211	EXTERNAL WATER SUPPLYTaking down old unserviceable GI pipe medium grade including all fittings in old/new position complete all as specified and directed of following sizes:-
212	(a) 25 mm bore size
213	(b) 40 mm bore size
214	(c) 50 mm bore size
215	Suppling & Laying of GI pipe medium grade including all fittings in old/new position complete all as specified and directed of following sizes:-
216	(a) 25 mm bore size
217	(b) 40 mm bore size
218	(c) 50 mm bore size
219	Supply only Float valve with epoxy coated aluminium rodand highdensity ball of following sizes complete all as specified and directed
220	(a) 25 mm bore size
221	(b) 40 mm bore size
222	Supply only gun metal gate valve with iron wheel head screwed both endsfor iron pipe, Isi marked, as per IS : 778 of following sizes complete all as specified and directed:-
223	(a) 25 mm bore size
224	(b) 40 mm bore size
225	FIRE FIGHTINGSupply and fixing cotton synthetic fabric circular woven jacketed rubberised fabric fire hose RRL 15 Mtrs long with coupling Stainless Steel 63 mm size male and female instantaneous type including taking down old unserviceable hosecomplete all as specified & directed.
226	Taking down old unserivecealblecopper alloy (gun metal) branch pipe 63mm dia of suitable length fitted with 16mm dia nozzle complete all as specified and directed.
227	Supply and fixing in replacement instantenous type copper alloy (gun metal) branch pipe 63mm dia of suitable length fitted with 16mm dia nozzle complete all as specified and directed.
228	Taking down old unserivecealble water high pressure guage of capacity of 14Kg/Per Sqcm complete all as specified and directed.
229	Supply and fixing in replacement water high pressure guage of capacity of 14Kg/Per Sqcm complete all as specified and directed.
230	Taking down old unserviceable fire hose reel drum suitable for 20/25 mm dia rubber hose complete all as specified and directed.
231	Supply and fixing in replacement fire hose reel drum 30 RM suitable for 20/25 mm dia rubber hose complete all as specified and directed.
232	Taking down old unserviceable nozzle 20mm dia gun metal with shut off valve rubber hose complete all as specified and directed.
233	Supply and fixing in replacement nozzle 20mm dia gun metal with shut off valve rubber hose completeall as specified and directed.
234	Supply and fixingmanual call point break glass type enclosed inM S enclosuresbody of 3 mm thickness complete with chain and harmer and incl inscriber in case of fired break glass complete includingtaking down old unserviceable manual call bell point complete all as specified and directed.
235	Taking down old unserviceable single outlet 63mm dia Stainless Steel hydrant valve complete all as specified and directed.
236	Supply and fixing in replacement single outlet 63mm dia Stainless Steel hydrant valve with coupling & chain confirming to IS 5290 complete with nut, bolt, washer and rubber gasket etc complete all as specified and directed.
237	Supply and fixing Fire brigade inlet connection 2way complete all as specified and directed.
238	Supply and fixing GM gate valve 25 mm dia complete all as specified and directed.
239	Supply and fixing 2 way fire brigade inlet Connection (ISI marked) including nut, bolt washer and rubber gasket etc. complete all as specified and directed.
240	Supply and fixing water delivery rubber (first aid hose) 20 mm dia 30 mtr length to with stand 10 kg per Sq cm working pressure fitted with Gun Metal nozzle and shut off valve of any size complete all as specified and directed.
241	Supply andfixing fire alarm control panel for ten zone complete all as specified and directed.
242	Taking down old unserviceable sub main wiring with two core 1.5 sqmm copper wire complete all as specified and directed.
243	S & F in replacement of sub main wiring with two core 1.5 Sq mm copper wire FRLS PVC insulated unsheathed cable 1100 V grade heavy duty, copper conductor multistranded , drawn in PVC conduit , medium grade 20 mm dia having 2 mm wall thickness including one single coreFRLS PVC insulated copper cable solid core of size 1.5 Sqmm as earth wire fix to wall etc. including taking out old unserviceable cable for manual call point at each floor complete all as specified and directed.
244	Supply and fixing electrically operatedHooterenclosed in MS enclosures of suitable size painted with synthetic enameled paint red colouredcomplete with suitable transformer including taking down old unserviceable hooter, complete all as specified and directed.
245	Supply and fixingFire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of +5 DB 500 mtrs range complete all as specified and directed.
246	M & L for preparation and painting to existing steelsurface of fire cabinet box with one coat of primer over two coat of synthetic enamel paint complete all as specified and directed.
247	M & L for welding works for existing door hinges, handel and locking arrangements etc complete all as specified and directed.
248	M & L for fire glass including writing works on glass (Fire) complete all as specified and directed.
249	Taking down old unsv MS ERW pipes heavy grade off 100 mm dia complete all as specified and directed.
250	Supply and lay in replacement of MS ERW pipes of 100 mm size ,heavy grade off with all fittings laid in floors or fixed to walls and ceiling complete all as specified and directed
251	Supply and lay flanges duly welded on ends of MS pipes of 100mm size, not less than 20mm thick including nut, bolts, washers etc all as requied at site and directed
252	INTERNAL ELECTRIFICATIONTaking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittingsetc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.
253	M&L for point wiringwith PVC insulated unsheathedmulti strandedFRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- NOTE : Minimum thickness of the MS sheet of sunken box should be 1mm . Make of wire : Polycab ,RR kabel ,Finolex.
254	One light/ point controlled by one number, one way 5 Amp switch.
255	One Ceiling fan/exhast fanpoint controlled by one number, one way 5 Amp switch.
256	One light point controlled by two numbers, two way 5 Amp switches.
257	One bell/buzzer point controlled by one bell push button
258	One three pin socket outlet 5 amps point controlled by one number, one way switch on independent board.
259	One three pin 5 Amp socket outlet point controlled by one number, one way switch on same board.
260	All as per item No. 243 here-in-before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.
261	Note for item No 243 & 244 above:- (i)Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii)No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.
262	S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating complete all as specified and directed.:-
263	One way 6 Amp one module rating.Make : Legrand Arte Cat Part No 573400 , Havells(Murano)- ACUSXXW101, Schneider- X1001WH.
264	Modular Bell push switch 6 Amp one module rating. Make:- Havells(Murano)- ACUSBXW101, Legrand - 673404 , Schneider-X1005WH
265	One way 16 Amp one module rating. Make : Legrand Arteor Cat Part No 573410, Havells(Murano)- ACUSXXW161,Schneider-X1101WH
266	All as per item No. 245 here in before but 2 way 6 Amp. Make:Legrand Arte Cat Part No 573402 or equivalent in Havells(Murano)- ACMSXXW102 ,Schneider-X1002WH
267	S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade (as catered in point wiring above) of following ratings complete all as specified and directed. :-
268	2/3 Pin 6 Amp combined two module type. Make:- Legrand.Cat Part No 573470,Havells(Murano)- ACUKXXW063, Schneider-X2005WH
269	2/3 Pin 16 Amp combined two module type. Make : LegrandCat Part No 573471, Havells(Murano)- ACUKCXW163, Schneider- X2106WH
270	Supply & fix Call bell ding dong AC 230 volt single pole complete all as specified and directed. Make: Havells- AHLLXXR000 or equivalent in Legrand/Schneider.
271	S&F ceiling rose 3 phase / PVC/polycarbonated, isolated body ISI Marked complete all as specified and directed.
272	Disconnecting mains connection and taking out old sheet steel enclosure (DB) with metal clad 2 pin and earth plug and socket SPN, 20 amps distribution board and making goodto the disturbed surface complete all as specified and directed.
273	Supply and fixingof Modular MCB SP 16Amps 240V 3 KA, C Curve,fitted in main switch board, including 2.5 sqmm wire connecting power socket & modular MCB complete all as specified and directed. Make: Havells Cat No. DHFNCSPA016,LK (L&T) -CB93101KW16, Schneider Cat Part No P8016-N.
274	Disconnecting mains connection and taking out old distribution board any way SPN with 200 amp rated bus bar complete with MCB and making goodto the disturbed surface complete all as specified and directed.
275	Supply and fix in replacement of factory made SPNDB\"s double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coatedsurface mounting12 way SPN 220 Volts,with suitable busbar, neutral link & earth link suitable for complete all as secified and directed. Make : Legrand 507612, L&TBH112DDB ,Schneider A9HSND12.
276	S&F in replacment ofMCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note:Make of the MCB should be the same as that of DB
277	MCB SP 6 to 32 Amps.
278	MCB DP 32 Amps .
279	S&F in replacement of LED Tube light of 20 watt 230 volt (approx size 4 ft) box type complete with LED tube light 20 watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F>0.95, minimum efficacy 120 lumen/watt IP 20 rating complete all as specified. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat part No CCS-100-20-65-HL2-OP-NWH, Philips cat part No BN308C LED20S-6500 L120 PSU WH
280	S&F in replacement of LED Tube light fitting 10 watt (approx size 2 ft ) white230 Volt AC completeincluding connecting up with three core twisted flexible copper conductor cable having min P.F >0.95, minimum efficacy-100 lumen/watt, IP 20 rating all as specified. Make : Bajaj/Crompton/Philips
281	S&F in replacement Wall mounteddecorative bedlightLED light of3 W goosenek arm easy to adjustpremium material white metal 75lm/3000Kand finish energy saving with LED light source fixture, complete all as specified and directed. Make: Philips CAT Part No.30975, Legrand, CAT Part No.Lyncus Reading light 677316, IKEA Nymne CAT Part No.GU573671.
282	S&F in replacement of wall mountedLED light bulkhead type 6-7 Watt, complete all as specified and directed. Make: Philips cat part No WT140W LED7S CW PSU S1 PC or equivalent in Crompton,Bajaj.
283	S&F in replacement aesthetically designed Wall mounteddecorative wallLED light of 15 Wfixture with opal diffuser to give glare free light including suitable LED lamp of 15 W, complete all as specified and directed.Make: PhilipsCAT Part No. Muziris 31434, LustreCAT Part No. Li 3618/IW, WiproCAT Part No.BW06
284	S&F in replacement of aesthetically designed decorative warm white LED mirror light of07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and directed.Make : Philips Model No 31402, Murphy Cat Part No MLDL 3 in 1 Mirror WOOD 12W-02, FILLISKA-1239.
285	Supply and fixing in replacement of LED building securitylight fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.Make: Philips/Crompton/Bajaj.
286	Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 1400 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making, Louver complete all as specified and directed.Make:- Havells- VENTILAIR DB , Bajaj- MAXX AIR ,Crompton- DRIFT AIR PLUS.Note:- The rate includes making proper arrangement for fixing ie cutting bricks/stone boulders of appropriate size and finishing the surface with cement complete all as specified and directed by Engr-in-charge.
287	Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making, Louver complete all as specified and directed.Make:-Usha style name modern Crisp Air VX/Bajaj maxima Neo 250/Havells VENTILAIR DX.Note:- The rate includes making proper arrangement for fixing ie cutting bricks/stone boulders of appropriate size and finishing the surface with cement complete all as specified and directed by Engr-in-charge.
288	Taking down/ dismantelling ceilingfan,size 1200mm including fan bladecomplete in all respect and deposit to MES store yard complete all as specified and directed .
289	Supply and fixingremote controlled BLDC ceiling fan 1400 mm sweep, with remote, having minimum CMM 260, operating at 230 volts, 50Hz, having full copper motor & powder coated ribbed aluminium blades for higher air delivery, longer life complete with all the accessories including making arrangements to hanging of fan to ceiling with proper hook, nut,bolts & remote stand complete all as specified and directed.Make :Atomberg Efficio model No EFC21435RM or equivalent in Havells,Crompton, Bajaj, Orient. NOTE : Old ceiling fanwith all its accessories will be deposited to MES store yard in safe custody to process the BER board.
290	Supply and fix ElectricWater heater (Geyser) storage typeof capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum&high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering , connection to inlet and outlet valves, testing complete all as specified and directed.NOTE : Old geyser with all its accessories will be deposited to MES store yard in safe custody to process the BER board .MAKE :Havells- Adonia R/Crompton-Solarium Care/Bajaj Armor series Pentacle.
291	Taking down old sub main wiringany sizealuminum/copperconductor cable from the concealed conduit from the wall/ceiling and making good to the disturbed surface complete all as specified and directed.
292	M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x10sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make- Polycab, Finolex, RR KABEL
293	M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x4sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make- Polycab, Finolex, RR KABEL
294	M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25X4 mm bolted (with GI nuts, bolts & check nuts) and rivetedto earth (Plate) electrode at one end and connected to main switch boardtest point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0using 12 mmgraded crushed stone aggregate, RCC cover etc complete all as specified and directed.
295	S&F rigid non-metallic PVC conduit medium grade 20 mm dia for telephone cable complete with all fixing accessories complete all as specified and directed.
296	S&F wall mounted electric chimney of minimum width 60cm, having suction power not less than 1350cum/Hr, with stainless steel outer layer, with 3 speed motor with decorative smart cooker hood SS/glass, energy efficient LED light with digital display including ducting,having auto clean function,noise level not more than 60dB, Control Panel- Touch & motion sensor control, including ducting as per site requirement complete all as specified and directed.Note - The rate quoted by the contractor will include ducting length required from the chimney to the exhaust hole.Make:- ELICA -CURVE FL 600 HAC LTW MS NERO, HINDWARE - NV10PLUS60, FABER- HOOD PRIMUS PLUS 1WH.
297	S&F one module RJ -11 telephone socket completet all as specified and directed
298	Taking down and refixing of geyser capacity 25 Litres complete all as specified and directed.
299	S & F of instant hot water Geyser of 5 ltrs capacity,vertical type with suitable size of fastner and incl provision and connecting of SS braided pipe with adopter for inlet and outlet water connection, copper element should be corrossion resistant, antiscaling magnesium anode, and inner tank material of superior glass lined tank having heating element of minimum 2.5 kW complete all as specified and directed. It should haveminimum two year warranty on product & minimum three year warranty on heating element complete all as specified and directed. Make: CromptonCAT Part No.Rapid Jet 5-L, BajajCAT Part No.SHIELD SERIES VERRE PLUS IWH, AO SMITHCAT Part No.EWS-5L

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Certain Offers Md Accommodation At Sp Marg Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Certain Offers Md Accommodation At Sp Marg Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us