|
| 1 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 2 | S&F Pre painted galvalum corrugated steel sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm of any colour having tensile strength of 550 Mpa as in Roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F Pre painted galvalum plain steel sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm of any colour having tensile strength of 550 Mpa as in Roof covering/cladding (ridge) to wall fixed with self tapping screws complete all as specified and as directed. |
| 4 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, confirming to Fe-290 (Gde E165) cleats etc. complete all as specified and as directed. |
| 5 | Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and directed.Note: Demolished material through out of MoD Land rate included above item. |
| 6 | M&L for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 7 | M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coatin CM (1:4) complete all as specified and directed. |
| 8 | M&L for preparation of old steel surface of any description exc. 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 10 | M&L for non skid ceramic tiles, joint free, coloured tiles7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 11 | M&L for 50mm thick PCC (1:3:6) Type C2(using 40mm graded stone aggregate)as in floor finishes surface even and fair without using extra cement complete all as specified and as diected |
| 12 | M&L for glazed ceramic tiles, coloured tiles of size 300mm x 450mm x 7 to 8 mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4)completeall as specified and directed. |
| 13 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 14 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 15 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 16 | M&L for PCC(1:2:4)type B-1 (using 20mm graded stone aggregate) as in coping, in lintels upto1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as complete all as specified and as directed. |
| 17 | Taking down cement on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.Note: Demolished material through out of MoD Land rate included above item. |
| 18 | M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick/ concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces, mixed with water proofing compoundat the rate of 200ml per bag of cement finished even and smooth without using extra cementcomplete all as specified and directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid under relevant item. |
| 20 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 21 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of3mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 22 | M&L for preparation of new plastered surfaces of wall and applyingthree coats of white wash complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces of wall and applyingtwo coats of cement base paint over a coat of primer complete all as specified and directed. |
| 24 | M&L for complete removal of existing treatmentof wall and applying two coats of oil bound distemper, over and incl a layer of3mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 25 | M&L for complete removal of existing treatment of plastered or unplastered surfaces walls andapplying two coats of white wash complete all as specified and directed. |
| 26 | M&L for complete removal of existing treatmentof surfaces of walls of plastered or unplastered surfacesandapplying two coats of cement base paint complete all as specified and directed. |
| 27 | Taking down chowkhat or frame (without taking off shutter from the frame)size not exceeding 1.5 Square metre each complete all as specified and as directed. |
| 28 | Taking down chowkhat or frame (without taking off shutter from the frame) size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 29 | Supply & Fixing solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 30 | S &F for factory made solid panel PVC door shutter 30mm thick (style) consisting to framemade out ofM.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20 mmwidth struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 31 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 32 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 33 | M & L for Powder coated Anodised aluminium window and ventilator shutters, (adequate track), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.. Note : Glass, wire cloth, grill shall be measured and paid seperately. |
| 34 | M & L for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed. |
| 35 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed. |
| 36 | M&L for Granite slab 18 to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bedCM (1:4) the shade of granite stone including cutting and polishing type as incill and jamb/skirting, steps cooking plateformsincludigng rounding off the exposed edges and polishing complete all as specified and as directed. |
| 37 | S&F of 4.00mm thick sheet glass ordinary qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beading complete all as specified and directed |
| 38 | S&F of galvanised wire cloth,0.56mm nominal dia ofwire and averagewidth of aperture 1.18mm and fixed with tinned tacks or galvanisedstaples complete all as specified and directed |
| 39 | S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. |
| 40 | S&F for aluminium butt hinges of 100mm type C-21 complete all as specified and as directed. |
| 41 | S&F for Mild Steel Butt hinges , medium weight, cold rolled , of size 100 mm complete all as specified and as directed. |
| 42 | S&F for MS 300 mm ordinary rat tail springs plate type incl.rollar plate etc, complete all as specified and directed. |
| 43 | S&F for Extruded aluminium alloy handle of 150 mm size fabricatedtype, anodised complete all as specified and as directed. |
| 44 | S&F for aluminium anodised barrel tower bolt of 200mmof extruded section complete all as specified and as directed. |
| 45 | S&F for 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 46 | Supply and laying 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as directed. |
| 47 | Supply and laying 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as directed. |
| 48 | Supply and laying 32mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as directed. |
| 49 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed. |
| 50 | S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed. |
| 51 | S&F for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. |
| 52 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 53 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 54 | Excavating in trenches n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. (Note: As in foul condition manualy excavation works) |
| 55 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 56 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 57 | S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and directed. |
| 58 | S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and directed. |
| 59 | S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and as directed. |
| 60 | S&F for SWR bends 75mm provided with access door complete all as specified and as directed. |
| 61 | S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 62 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as inconcrete bed to drain pipes of 100 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; including necessary form work complete all as specified and as directed. |
| 63 | M&L, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as inconcrete bed to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; including necessary form work complete all as specified and as directed. |
| 64 | S&F for reinforced concrete pipes 150mm bore class NP-2 laid and jointed with collar in CM 1:1 complete all as specified and as directed. |
| 65 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 66 | M&L for cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cuttingout existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed. |
| 67 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and as directed. |
| 68 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 mabove the starting point complete all as specified and as directed. |
| 69 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and as directed. |
| 70 | M&L for PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement as in repair, complete all as specified and directed. |
| 71 | S&F for mild steel Chromium plated grating 100 mm dia, Nahani traps, complete all as specified and directed. |
| 72 | S&F for vitreous china squatting pan, orissa pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 73 | S&F for PVC valveless syphonic action type flushing cistern of capacity 10 litres, low level white with inlet ball valve, float end handle handle including bracket complete all as specified and directed. |
| 74 | Supply only for 15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed. |
| 75 | Description all as per item No 74 here in before but supply only. |
| 76 | S&F for vitreous china wash basin, white, flat back of size 550mm x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Supply of Pillar tap andPVC connection will be measured paid separetly. |
| 77 | S&F for PVC waste pipe flexible type 32mm bore, complete all as specified and directed. |
| 78 | S&F for waste couplingfittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified. |
| 79 | S&F for vitreous china urinals, Half stall type ,whitewith grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 80 | S&F for in renewal full Brass urinal Spreader chromium plated, cast copper alloy, with brass ceramic disc spindleand capston heads,scewed down high pressurefor iron pipe fixed and complete all as specified . |
| 81 | S&F for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and directed. |
| 82 | S&F for 15mm angle cock chromium plated,cast copper alloy, with capston heads, scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified and as directed. |
| 83 | Supply only 15mm,pillar taps fancy type long body chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and as directed. |
| 84 | S&F for 15mm, bib tapFancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered \"hot\" or \"Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and as directed. |
| 85 | S&F of size 600x450 mm bevvelled edge looking mirror of selected quality glass mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated flat head screws complete all as specified and directed |
| 86 | Repairing of steel rolling shutters including taking down & refixing in same position of any type push/pull or manual type of area exceeding 4 sqm and not exceeding 10 sqm incl repairing of ball bearing, anchoring rod, hasp and staple, hood cover, sliding railing, ball bearing, Safety lever locks mild steel with 4 levers & applying grease/lubricants etc complete fittings and fixtures including making it functional by replacing/repairing of parts of rolling shutter incl complete removal of existing painting and applying one coat of primer and two coats of synthetic enamel paint of approved colour on both sides complete all as specifed and as directed. |
| 87 | M&L for 75mm thick PCC (1:3:6) Type C2(using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement complete all as specified and as diected |
| 88 | M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected. |
| 89 | Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. |
| 90 | M&L for Anodised aluminium snap grid frame,grid of size 605mm x 605mm work for false ceiling complete all as specified and directed. |
| 91 | M&L for screws Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 92 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 93 | S&F in renewal Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc including fixing of brackets end knob complete all as specified and directed. |
| 94 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 95 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 96 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity, complete, all as specified and directed. |
| 97 | Taking down unserviceable TPN/VTPN DBwith MCB\"s of any make/capacity, complete all as specified and directed. |
| 98 | M&L concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete all as specified and directed. |
| 99 | One light point controlled by one switch. |
| 100 | One Ceiling fan point controlled by one switch. |
| 101 | One Exhaust fan point controlled by one switch. |
| 102 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 103 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 104 | Description all as per item No 98 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. ONLY for power point complete all as specified and directed. |
| 105 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 106 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 107 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 108 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 109 | S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 110 | S&F modular electronic step rotary type fan regulator of two module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and directed. |
| 111 | S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. |
| 112 | S&F LED Lamp 09/10 watt with 5 star rating complete all as specified and directed. |
| 113 | S&F LEDMirror tube light fitting09/10 watt ,4000k to 6500kcomplete all as specified and directed. |
| 114 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500k as per requiredfitting , incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 115 | S & F decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDsIP 66 protection LED of 10 watt including reqdlength of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed. |
| 116 | M&L sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 117 | Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing formeters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement and comprising for following fittings (i) MCCB 4 pole, 100 Amps- 01 No (For incoming)(ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts )- 01 No(iv) Indicator Lamp set of three R,Y,B- 01 Set(v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SPN 63 Amps - 04 Nos (For outgoing) (vii)Nutral bus bar link mounted on insulator (viii) Supply and fix single phase energy meteras space in distribution box- 04 Noscomplete all as specified and directed.Note;- (i) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (ii) All internal wiring inside the panel used for metring purpose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5 Sqmm. |
| 118 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 119 | S&F MCB SPN 40 to 63 Amps, 240 volts \"C\" series 16 KA, including connection with suitable size copper lugs complete all as specified and directed. |
| 120 | S&F MCB SP 6 to 32 amp 240 volts, 40 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. |
| 121 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and directed. |
| 122 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. |
| 123 | Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed. |
| 124 | Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm complete all as specified and directed. |
| 125 | S&F tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 126 | M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe complete all as specified and directed. |
| 127 | M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe complete all as specified and directed. |
| 128 | S&F in renewal 20 mm Gate Valve cofiorming to IS 14846/2000 ,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts complete all as specified and directed. |
| 129 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion complete all as specified and directed. |
| 130 | Supply & fix exhaust fans, steel body, AC single phase 230 Volt of size 300 mm sweep copper winding with louvecompletion complete all as specified and directed. |
| 131 | Supply and fix exhaust fan(Fresh Air Fan) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mmcomplete all as specified and directed. |
| 132 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 sqmm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in \"D\" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II. |
| 133 | S&F for modular decorative plate and provising of new modular plate of different sizeincluding fixing ,the existing modular switchs , modular socket ,modular regulator and refixing them in new board complete all as specified and directed. |
| 134 | White cover plate with frame but 2/3/4 module |
| 135 | White cover plate with frame but 6/8/12 module |
