|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. |
| 2 | Demolition of Reinforced Cement Concrete (Existing RCC water tank, Facia etc ) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 3 | M & L 100mm thick cement concrete 1:2:4 type B-2(using 40 mm graded stone aggregate) for PVC water tank base complete all as specified and directed. |
| 4 | M&L for cement concrete 1:5:10 type E2(using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed. |
| 5 | M&L for 25 mm thick cement concrete 1:2:4 type B0(using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 7 | M&L for non - skid ceramic tilecoloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match, over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for non - skid ceramic tilecoloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including rendering 10 mm thick on fair facesbrick work or concrete surface in cement plaster 1:4 complete all as specified and directed. |
| 9 | M&L non-skid ceramic colouredtiles, rectified, joint free, 7 to 8mm thick, matte finish (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over & including screed bed or bedding layer 15 mm thick of cement mortar 1:4 complete all as specified and directed. |
| 10 | M&L forglazed ceramic coloured tiles in vertical surface of size 350mm x 250mm x 7mm/ 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed inwhite or colour cement to match, laid over and including rendering 10 mm thick on fair facesbrick work or concrete surface in cement plaster 1:4 complete all as specified and directed. |
| 11 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 12 | M&L for machine cut Kota stone slab 18 to 20mm thick , as in flooring,laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingover and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 13 | M&L for machine cut kota stone slab 18-20 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coatin CM (1:4) complete all as specified and directed. |
| 14 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 15 | M&L for Brickworkwith subclass \"B\" bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 16 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 17 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6,finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 18 | M&L for rendering 5 mm thick on faces or brick work ,concrete surfaces, in ceiling & in CM 1:3, finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick onother than fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC ,finished even and smooth (without using extra lime or cement) complete all as specified and directed.(Note:- WPC shall be measured & paid seperately). |
| 20 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified anddirected. |
| 21 | M&L for preparation of new plastered ceiling surface and applying threecoats ofwhite wash completeall as specified and directed. |
| 22 | M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 1-2 mm thick wall care putty on wall complete all as specified and directed. |
| 23 | Material & Labour for new plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 24 | M&L for preparation of old surface and applying one coat of white wash (lime) on ceiling inl cornices plastered or un-plasteredsurfaces complete all as specified and directed . |
| 25 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying two coat of oil emulsion distemper white or tinted complete all as specified and directed. |
| 26 | M&L for complete removal of exiting treatment from external walls (any no of layers ) by scrapping with steel scrappers or any other means, preparation ofold surfaces complete applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 27 | M&L for preparation of old surface and applying one coat of white wash (lime) on walls inl cornices plastered or un-plasteredsurfaces complete all as specified and directed . |
| 28 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. |
| 29 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 25 bore of pipe, complete all as specified and directed . |
| 30 | Supply and laying 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified & directed. |
| 31 | Supply and laying 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed . |
| 32 | S&F in renewal bib taps, fancy type 15 mm caste copper alloy long body, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixedcomplete all as specified and directed. |
| 33 | S&F in renewal 15mm Angle stop valve of CP brass any colour high pressure screwed for iron pipe or for union fixed complete all as specified and directed. |
| 34 | S&F in renewal PVC connection 15mm sizewith PTMT nuts on both endsof length 450 mm complete all as specified and directed. |
| 35 | S&F in renewal swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed. |
| 36 | S &F in renewaltublar towel rail aluminium anodised 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed. |
| 37 | S&F in renewal for Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. |
| 38 | S&F in renewal Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed |
| 39 | S&F in renewal Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed. |
| 40 | S&F in renewal grating 100/125 mm dia of PTMT, fixed to Nahani trap complete all as specified and directed. |
| 41 | S&F in renewal wash hand basin vitreous china (flat back) of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete complete all as specified and directed. |
| 42 | S&F in renewal32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 43 | S&F in renewal Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in renewal 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap with telephonic shower (3-in-1 system) for cold & hot water wall mixer having inclusive connection for shower complete all as specified and as directed. |
| 45 | S&F in renewal vitreous china squatting pan \"(Orrissa\" pattern) of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed. |
| 46 | S&Fin renewal PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. |
| 47 | S&F in renewal Mirror of selected quality glass mounted on 6 mm thick commercial plywood water proof fixed on wall withstainless steel brackets/clips and brass chromium plated screws complete all as specified and directed. |
| 48 | S&F forrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 49 | S&F in renewal Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed |
| 50 | S&F in renewal 20mm stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed complete all as specified and directed. |
| 51 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 52 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ floors, complete all as specified and directed. |
| 53 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ floors, complete all as specified and directed. |
| 54 | S&FPVC (SWR) bends any radius, 110mm bore, complete all as specified and directed. |
| 55 | S&FPVC (SWR) bends any radius, 75mm bore, complete all as specified and directed. |
| 56 | S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore,complete all as specified and directed. |
| 57 | S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore,complete all as specified and directed. |
| 58 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 59 | S&F in renewal for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 60 | S&F in renewal for PVC (SWR) \"P\" or \"S\" trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 61 | S&F in renewal for PVC (SWR) floor trap/ Nahani trap 75mm, plain with greating including setting and jointing with solvent cement complete all as specified and directed. |
| 62 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed. |
| 63 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 64 | Taking down shutters of any descriptionexc 1 sq. m and n exc 2 sqm each complete all as specified and as directed. |
| 65 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 66 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 67 | S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete all as specified and directed. |
| 68 | S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs,hinges, lock strike plate, etc, complete all as specified and directed. |
| 69 | S&Ffor 35 mm thickskeleton shutters of 2nd class Hard Wood for door, open rebated and prepare to receive glass, guaze, etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a), but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed. |
| 70 | S&F 30 mm thick Flush shutters ,soild coreconstruction ,with block board core and plywood face panels , commercial type on both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. |
| 71 | S & F Box Type steel windows, Ventilator with side hung shutters (double shutters for glass and gauge ) joined together with and including grills using 12 mm square bars @ 10 mm c/c as per TD No CEBZ/TD/14/2011, Sheet no -1/7 to 7/7 Including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and weldedand preparing new steel surfaces, exc. 10 cm width or girth and applying two coats synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 72 | S&F for 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. |
| 73 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 74 | S&F for 200 mm size aluminium anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 75 | S&F for extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and directed. |
| 76 | S&F for 100 mmsize butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 fixed complete all as specified and directed. |
| 77 | S&F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 78 | M&L for providing cement concrete 1:3:6 type C1( using 20 mm graded stone aggregate) as filling inside pressed steel frame complete all as specified and directed. |
| 79 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 80 | S&F for 18 mm thickPVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesivecomplete all as specified & directed.. |
| 81 | S&F forcontinous (piano) hinges ,mild steel, bright finished or electro galvanised, width of flap 30mm complete all as specified and directed. |
| 82 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 83 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 84 | S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. |
| 85 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guiders) and hanging, also fastening and fixing complete Fe 410-W (Gde-E-250) quality-Acomplete all as specified and directed. |
| 86 | M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 87 | M&L forfor applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed. |
| 88 | M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 89 | M&L for preparation of Old painted surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 90 | S&F in renewal for curtain rod of Stainless steel 23-25 mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, side nobes etcfixed on walls with screws with PVCrawl plugs etc complete all as specified and directed. |
| 91 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggrtegate) as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed. |
| 92 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggrtegate) as required all as specified and as directed. |
| 93 | M&L for refixing of shutters in same opening of any description exc 1 sq. m but n.exc 2.00 sqm each in same opening complete all as specified and as directed. |
| 94 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 95 | Taking down ceilingfan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 96 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 97 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity, complete all as specified and directed. |
| 98 | Taking down unserviceable TPN/VTPN DBwith MCB\"s of any make/capacity, complete all as specified and directed. |
| 99 | Taking down the water heater (Geyser) storage type of any make25/50 Ltrs capacity. Dismantling carefully from its position fixed on walls, descaling the inner tank, flange assembly by applying descaling solution, reassembling the same, after renewal of defective parts and re-installing to their original locations or as directed, after commissioning and testing complete all as specified and directed. |
| 100 | M&L for concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete all as specified and directed. |
| 101 | One light point controlled by one switch. |
| 102 | One Ceiling fan point controlled by one switch. |
| 103 | One Exhaust fan point controlled by one switch. |
| 104 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 105 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 106 | One Bell point controlled by one way 5 Amp push button switch. |
| 107 | For one light pointcontrolled by 2- two way switch |
| 108 | Description all as per item No 100 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. ONLY for power point complete all as specified and directed. |
| 109 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 110 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 111 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 112 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 113 | S&F Modular switch 2 way 6A, 1 module complete all as specified and directed. |
| 114 | S&F modular bell push flush type, 5 Amps complete all as specified and directed. |
| 115 | S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. |
| 116 | S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 117 | S&F modular electronic step rotary type fan regulator of two module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and directed. |
| 118 | S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. |
| 119 | S&F LED Lamp 09/10 watt with 5 star rating complete all as specified and directed. |
| 120 | S&F LEDMirror tube light fitting09/10 watt ,4000k to 6500kcomplete all as specified and directed. |
| 121 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 4000k to 6500k as per requiredfitting , incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 122 | S & F decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDsIP 66 protection LED of 10 watt including reqdlength of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed. |
| 123 | M&L sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 124 | S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 10 KA complete with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down complete all as specified and directed. |
| 125 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 126 | S&F MCB SPN 40 to 63 Amps, 240 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 127 | S&F MCB SP 6 to 32 amp 240 volts, 40 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. |
| 128 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 129 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 50 Sqmm 3.5 Core complete all as specified and directed. |
| 130 | Excavation in trenches n exc. 1.5 m wide and n\" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 131 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm thick each layer complete all as specified and directed. |
| 132 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 133 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. |
| 134 | Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed. |
| 135 | Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm complete all as specified and directed. |
| 136 | S&F tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 137 | M & L in renewalfor GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. |
| 138 | M & L in renewal for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenchescomplete all as specified and directed. |
| 139 | S&F in renewal25 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 25 mmm dia complete all as specified and directed. |
| 140 | S&F in renewal20 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 20 mm dia complete all as specified and directed. |
| 141 | Supply and fix electric water heater, storage type glass lined enamel tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 142 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion complete all as specified and directed. |
| 143 | Supply and fix exhaust fan(Fresh Air Fan) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mmcomplete all as specified and directed. |
| 144 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 sqmm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in \"D\" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II. |
| 145 | S&F for modular decorative plate and provising of new modular plate of different sizeincluding fixing ,the existing modular switchs, modular socket ,modular regulator and refixing them in new board complete all as specified and directed. |
| 146 | White cover plate with frame but 2/3/4 module |
| 147 | White cover plate with frame but 6/8/12 module |
