Tender For Special Repair To Certain Offers Md Accommodation At Sangli Apartments Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

TDR : 53426509

Tender Notice
BOQ

28 Days Left

Delhi , Delhi

Tender Brief : Tender For Special Repair To Certain Offers Md Accommodation At Sangli Apartments Under Ge New Delhi, Delhi Cantt-10

Document Fees
₹ 3000 /-

EMD
₹ 598000.0 /-

Tender Value
₹ 5.46 Crore /-

Submission Date
11-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	NON-STRUCTURAL ITEMSM & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
2	M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.
3	Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition complete all as specified and directed.
4	M&L for reinforced cement concrete (Nominal mix), 1:2:4,20 mm graded stone aggregate) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
5	S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed.
6	M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
7	M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
8	Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
9	M&L Brick work with sub class \"B\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to seven story Bldg) complete all as specified and directed.
10	M&L Brick work with sub class \"B\" bricks , straight or curved on in half brick thick wallbuilt in cement mortar (1:4),(up to seven story bldgs.) complete all as specified and directed.
11	Dismantling of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in any mortar complete all as specified and directed
12	M & L for18-20 mm thickGranite (of any type) tiles machine cut, as in cooking plateform, including screed bed or bedding layer of mortar 20mm thick in CM 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
13	M&L fordrilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite complete all as specified and directed.
14	M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 15mm thick screed bed in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shadeincluding rounded edges with shade of Udaipur greencomplete all as specified and directed.
15	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
16	M&L for, double charged, super glossy/ hi gloss vitrified tiles light shade 9 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed cement mortar (1:4) complete all as specified and as directed.&L for 15 mm thick Full body (SGVT) vitrified tiles of size 800x 2400 mm of approved shadeflooring over and including 15mm thick screed bed in CM 1:6 Joints shall be filled by using Dr. Fixit Epoxy Tile Grout or equvalent of pigment to match with the shade of tile complete all as specified and directed.
17	M&L for double charged super glossy/ hi gloss vitrified tiles (light shade) 9 to 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid on 10mm thick cement plaster in CM (1:3) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cementto match the shade of tiles complete all as specified and directed.
18	M&L 600x600mm non skid ceramic tiles matt finished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 including scantling complete all as specified and directed.
19	M & L for supper gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces600mmx1200 mmincluding provision of high lighter tiles/boarder and jointed in neat cement slurryand pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
20	M&LNon skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cementto match the shade of tiles complete all as specified and directed.
21	M&L Glazed ceramic tiles of approved colour and design in vertical surfaces450x300x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurryand pointed in white or coloured cement to match incl 8-10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
22	M&L Glazed ceramic tiles of approved colour and design in flooring 600x600mmjointed in neat cement sluryand pointed in white or coloured cement to match incl 15mm thick screed bedding cement mortar 1:6 complete all as specified and directed.
23	M&L Glazed ceramic tiles 600x600mm of approved colour and design matching flooring, as in skirting laid on 10 mm thick cement plaster in CM (1:3), set and jointed and pointed in white/coloured cementto match the shade of tiles complete all as specified and directed.
24	Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etcincluding removal of debris from the MOD land complete all as specified and directed.
25	M&L for 15 mm thick rendering cement plaster inCM 1:4 on brick or conc surfaces(On external surfaces)even and fair finished without using extra cement upto G+11 stories bldgs heightincl necessary scafolding etc complete all as specified and directed.
26	M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed .
27	M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.
28	M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
29	M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying cement base wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
30	M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats of distemper approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.Notes:- (a)All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
31	M&L for preparation of old decorated surface (plastered or unplastered) of ceiling by complete removal of existing treatment by mechanical grinder and applying cement base wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer &two coats Distempering of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
32	M&L for preparation of newly plastered surfaces of walls/ceiling and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
33	M&L for preparation of old decorated plastered surfaces of walls/ceiling, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.Notes:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimum regional HQs) issued not earlier than 60 days days from start date of the said finishing work.(c) The contractor shall provide application, testing and certification of finishes by paint manufacturing firms/their authorised applicators.(d) Cost of above mentioned shall also included in quoted rates.
34	Dismantling of floor of size exc 1.5 Sqm and not exceeding 6.00 Sqm mtr for EWC water closetand removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 4.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
35	S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed.Make :- Hindware Cat part No. 92573, Jaquar Cat part No. WC OPS-WHT-15853S300UF, Kohler Cat No ‎77739T-SL-0, Cera cat No A1014110
36	S&F in repair Vitreous China rimless wash down water closet pan wall mounted symphonic action, white, including soft close sheet cover of closed pattern with flat bottomcomplete all as specified and directed.Make :- Jaquar Cat No WC KUS-WHT-35953BIUFSM, Cera cat No S1043148 or equivalent in Kohler/hindware
37	S&F repair single piece concealed cistern 10 ltr capacity inlet ball valve float and handle including brackets complete all as specified and directed.Make :- Jaquar JCS -WHT-2431 or equivalent in Kohler / Hindware / Cera
38	S&F knob Q type Shine Finish for concealed cistern complete all as specified and directed.
39	S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
40	S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified and directed.
41	S&F in repair , ABS body Health Faucet including flexible pipe of 15 mm bore and min1.00M long with and including 15 mm bore complete all as specified and directed.Make :- Jaquar Cat No ALD-CHR-573, Hindware cat No F160192CP, KohlerCat No 12927IN-CP, Cera Cat No. : F8030107AB
42	S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed. Make :-Jaquar Cat No ACN-1151N, Kohler Cat No 5633IN, Hindware cat NoF880003CP, Cera Cat No. F5004110
43	S&F Glazed Partition with 12 mm thick toughened glass of approved make and manufacture, edges with Crystal/pencil polished all-round with patch fittings of top, bottom, sides and corners patch including Stainless Steel fixing arrangement and making necessary holes cut out etc. complete all as specified and directed.
44	S & F for bath room vanity unit of overall size 580x400x700mm (approx)with multiple cabins with outside openable two shutter made of water proof coating/items/with two nos of 100mm stainless steel handle with hinges and auto lock and 16-18mm thick black polish granite with counter typeTable Top while ceramic basin of Size: 42x42x15 cm table mouted type including cuplink and waste pipe with stainless steel bottle trap of 32mm size with 250mm &long flexible tube & wall hook with NRV, bottle trap and all fittings to proper functional condtion complete all as specefied and directed. Make of Bottle trap - Jaguar, Cera , Hindware. Make of Basin - Jaguar model JDS-WHM-25911 or Hindware cat No 91238 or cera cat part No S2020153 or kohler Cat No K-31459IN-0.
45	S & F in repair Vitreous China wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specefied and directed. Make :- Cera CAT Part No S2040157 & pedestal CAT Part No S2090101, Hindware Cat part No-10054 & pedestal-11018, Jaquar-cat part No CNS-WHT-811 & pedestal CAT Part No CNS-WHT-303
46	S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thickPVC sheet building board or commercial plywood with aluminium beading alround and fixed with steel screw complete all as specified and directed.
47	S&F in repair3 in 1 concealed single lever shower mixer,Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spoutwith 10 layersurface finished,Shower System owns a modern and stylish look . Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items all as specified by manufacture and directed.Make - Jaquar Cat No ORP-10125PM , Hindware Cat No F570022CP, KOHLER Cat No K-98754IN-4-CP, CERA Cat No F1015403-2891
48	S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.
49	S&F in repairs 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge)
50	S&F fancy type 15mm dia brass chromium plated quatrer turn basin pillar cock with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed.
51	S&F in repair Angular Stop Cock with Wall Flange while complete all as specified and directed.Make : Jaquar Cat Part No OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat No 11568IN-7BCP, CERA Cat Part No F1015201
52	S&F in repair fancy type brass chromium plated soap dish, complete all as specified and directed.Make :- CERA Cat Part no.F5004106, Jaquar Cat No ACN-1131N or equivalent in Kohler/Hindware
53	S&F in repair Bib tab (spout) whilewith Wall Flange including taking out old existing complete all as specified and directed Make :- Jaquar Cat Part No OPP-15037PM, Hindware Cat Part No F340004CP, KOHLER Cat No K-16093IN-4-CP, CERA Cat No F1013151
54	S&F in repair bib tap standard of CP any colour high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed.
55	S&F in repairs bib tap with crutch or butterfly handle, quarter turnscrewed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium platedlong body with flange complete all as specified and directed.
56	S&F in repair fancy type brass chromium plated soap dish, complete all as specified and directed.
57	S & F in repair granite shelf assembly consisting o shelf 12 cm wide complete all as specified and directed.
58	S&F in repair15 mm Angle/Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified and directed.
59	S&F in repairs Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed.
60	Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.
61	Taking up or down steel tubing and connections of 20mm bore complete all as specified and directed.
62	Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.
63	Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.
64	S & F PPR gate valve,for iron pipe 20 mm bore complete all as specified and directed.
65	S & F PPR gate valve,for iron pipe 25 mm bore complete all as specified and directed.
66	S & F in repair ofminimum 2mm thick collar and 1mm thick bowl modern square/rectangular stainless steelgrade 304 hand made sink with flat rim for kitchen or laboratory with plugs, washers and wastes fixed at modular kitchen over HDHMR board including all fixing arrangement including coupling with stainless steel bottle trap of 32 mm size with250mm, overall size minimuum 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed
67	S&Fin repair sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mmwith all fitting and fixture complete all as specified and directed fixed complete all as specified and directed.
68	S&F in repairs Kitchen sinkmixer15mm dia CP brass fancy type including joints to steel pipe or unions complete all as specified and directed. Make - Jaquar Cat No ARI-39309 , Make : Kohler Cat No 20591 IN-CP, CERA Cat No F1015501, Hindware Cat part No-F280020
69	Dismantling of cast iron pipe of any dia (soil/waste/vent) with fittings etc fixed to walls, ceiling, on floors & from trenches if requiredincluding taking out any type of joints complete all as specified and directed.
70	S&F 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to floors or trenches, complete all as specified and directed.
71	S&F 75mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to wall, complete all as specified and directed.
72	S&F 100mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to floors or trenches, complete all as specified and directed.
73	S&F 100mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent hubless pipe as per IS-15905:2011 in any length with or without ears with jointed with stainless steel shielded SS-304 coupling double screw system with EPDM rubber, fixed to wall, complete all as specified & directed.
74	S & F 75mm dia (bore of pipe) cast iron hubless Tee as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
75	S & F 100 mm dia (bore of pipe) cast iron hubless Tee as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
76	S & F 100 mm dia (bore of pipe) cast iron hubless vent cowl (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
77	S & F 75 mm dia (bore of pipe) cast iron hubless vent cowl (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber , complete all as specified & directed.
78	S&F cast iron floor trap with Cockroach Proofing CP grating with or without hole includingjointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.
79	S&F in repair Salt GlazedStoneWare (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified and directed.
80	S & F PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed.
81	S&F PVC (SWR) bends with cleaning eye holeof any radius of75 mm bore complete all as specified and directed.
82	S & F in repairs Stack clamps out of 75mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for any bore and any type of pipes complete all as specified and directed.
83	S&F PVC (SWR) vent cowl of any radius of75 mm bore complete all as specified and directed.
84	S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100mm bore and any type of pipes complete all as specified and directed.
85	S & F 100 mm dia (bore of pipe) cast iron hubless bends as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber, complete all as specified & directed.
86	S & F 75 mm dia (bore of pipe) cast iron hubless bends as per IS-15905:2011 (any radius), diminishing piece or tapers (larger bore measured) jointed with stainless steel shielded SS- 304 coupling double screw system with EPDM rubber, complete all as specified & directed.
87	All as per Srl item No 86 but fitted with hubbless oval access door as per IS -15905:2011 for 100mm dia (bore of pipe) complete all as specified and directed.
88	All as per Srl item No 87 but fitted with hubbless oval access door as per IS -15905:2011 for 75 mm dia (bore of pipe) complete all as specified and directed.
89	Taking down (Door/window) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
90	Taking down (Door/window) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
91	S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
92	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges shall be paid separately under relevant item.
93	Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). “the door should holding capacity wpc to be laminated wpth PVC foil of min 14 micron thick of approved design pasted with hot melt adhsive on both faces of shutter. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm25mm2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6mm size steel screws etc. complete all as specified and directed. Note: Fixture/fittings shall be measured & paid under relevant item
94	S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
95	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: Stainless steel butt hinges shall be paid separately under relevant item).
96	S&F stainless steel peg set of 6 peg, 45 centimeter long, complete all as specified and directed.
97	S&Fpowder coated aluminium Door sealnot less than 1.00 mtr long with fine fibres suitable for fixing in doors complete all as specified and directed.
98	Taking down Aluminium (Door/window) or frames with shutters exceeding 4 Sqm but not exceeding 9.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
99	S&F factory made uPVC of approved colour fixed glazedwindow/ventilatormade of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, complete all as specified and directed.Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made.
100	Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area n.exc. 2 Sqm each complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
101	Supply and fixing factory made uPVC of approved colour Three track three panels glazed/gauzed sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of door above 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor, EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock, stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg). G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
102	S&F in repairs aluminium powder coated grill (DECO grill DG 103 of 10mm thick) fixed with suitable ‘F’ section (No 8584) 15.30 x 23.40 x 1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed. Make : M/s ELESAR, M/s Royal Grill, M/s National Grill Associated profiles & Aluminium Ltd
103	M&L for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including filled with PCC 1:3:6 type B- 0 , complete all as specified and directed.
104	S&F 35 mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides. Flush shutters shall have teak wood edging asspecified inIS complete all as specified and directed.
105	M&L for two coats of synthetic enamel painton new wooden surfaces over a coat of pink primer incl preparation of surfaces over 10 cm width of girth complete all as specified and directed.
106	M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.
107	S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading , in square exc 0.5 Sqm in each pane complete all as specified and directed.
108	S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beading as in uPVC door/window shutter, in square n exc 0.5 Sqm in each pane complete all as specified and directed.
109	S&F4.00 mmthick figured glass, pin head type andglazing with oil putty in square and not exc .5sqm, complete all as specified and directed.
110	S&F stainless steelwire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or galvanised wire staples complete all as specified and directed.
111	S&F 100mm long (size) butthinges, heavy weight stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed.
112	S&F stainless steelAISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.
113	S&F Magic eye and fixed to doors complete all as specified and directed.
114	S & F Hasp and staple -100mm size, stainless steelAISI 304 grade safety type, including bolt to hinge plate, fixed with screws complete all as specified and directed.
115	S&F stainless steel drapery curtain rods SS 25mm nominal dia and minimum wall thickness 1.20mm of SS-304 grade of approved brackets design as approved fixed in brick/ concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.
116	S & F 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified and directed.
117	S&F 300mm long, stainless steel anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast stainless steel and fixed, ccomplete all as specified and directed.
118	S&F 150mm size stainless steel AISI 304 grade fancy type handlecomplete all as specified and directed.
119	S&F stainless steel AISI 304 grade floor door stopper withtwin rubber shoes double door stopper 75 mm long complete all as specified and directed.
120	S&F mortice lock of steel Matte Black Roses Finish 20cm handle, with lock body and vertical type 4 levers with 3 keys complete all as specified and directed.(Make : Godrej,Harrison, Hettich)
121	S&F mortice night latchof size 100mm, 4 levers of mild steel complete all as specified and directed. (Make : Harrison, Godrej, Hettich)
122	Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
123	S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets complete all as specified and directed.(Make :- Alstone, Akore Plast India Pvt Ltd, Floresta)
124	S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets all as specified and directed. (Make :- Alstone, Akore Plast India Pvt Ltd, Floresta)
125	S&F 75 mm long L Bihari concealed type hydraulic hinges incl stainless screw complete all as specified and directed. (Make : Hettich, Godrej, Sleek)
126	S&F Self closing ball bearing telescopic channel of size 12 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge. Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs all as specified and directed. ( Make : Hettich, Godrej, Sleek)
127	S&F15mm mild steel, chromium platedrod with fixing brackets, fixed in cupboardsfor hanging cloth of adequate strength complete all as specified and directed.
128	S&F stainless steel AISI 304 grade handle of size 75 mm long, etc. complete all as specified and directed.
129	S&F Magnetic catch for wooden cupboard with complete closer mechanism claps and clips fix with stainless steel screw complete all as specified and as directed.
130	S & F Continuous (piano) hinges width of flap 30 mm, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and directed.
131	S&F in repairs ICON (SS 304) fancy type stainless steeltowel rail size 600mm long including a pair of brass bracket complete all as specified and directed.
132	S&F in repairswire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm complete all as specified and directed.
133	Below Counter Carcasses :-Providing and fixing of machine crafted box type cabinet bottom unit 560mm depth having :-Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in .8 mm laminate of white colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm tk. laminate of white color and on external side in 1 mm HI gloss Acrylic laminate of aapproved colour of Rehau make . Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed, inclusive of following :- a). Soft close hinges shall be of Make : Hettich, Hafele, Samsung Irex.b). All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. c). All shutters to have Gola profiles for handleless shutters. d). Basic price of the 1mm Acryic laminate not to exceed Rs. 110/ sq.ft.
134	Above Counter Carcasses :- Providing and fixing of machine crafted box type cabinet bottom unit 325mm depth having :-Top panel - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Bottom panel - 18mm hdhmr board - laminated on both sides in .8 mm laminate of white colour. Lipping - 2 mm edge banding of Rehau matching the laminate shade.Back panel - 9mm hdhmr board - laminated on both sides in 0 .8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Vertical panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Horizontal panels - 18mm hdhmr board - laminated on both sides in 0.8 mm laminate of white colour. Visible side to be laminated with 1mm tk. laminate of approved color. Lipping - 2 mm edge banding of Rehau matching the laminate shade. Shutter - 18mm hdhmr board - laminated on inside with 0.8mm tk. laminate of white color and on external side in 1 mm HI gloss Acrylic laminate of aapproved colour of Rehau make . Lipping - 2 mm edge banding of Rehau matching the laminate shades complete all as specified and directed,inclusive of following :- a). Soft close hinges shall be of Make : Hettich, Hafele, Samsung Irex.b). All base units to have adjustable pvc legs with clip on 100mm high PVC skirting in grey color. c). All shutters to have Gola profiles for handleless shutters. d). Basic price of the 1mm Acryic laminate not to exceed Rs. 110/ sq.ft.
135	M&L SS 470mm long Pot and pan Innotech drawers complete all as specified and direted. ( Make : Hettich, Hafele, Samsung Irex)
136	M&L 600mm PVC cutlery tray of complete all as specified and direted. ( Make : Hettich, Hafele, Samsung Irex)
137	M&L SS 600mm dish rack of complete all as specified and direted.( Make : Hettich, Hafele, Samsung Irex)
138	M&L SS Detergent rack complete all as specified and direted. ( Make : Hettich, Hafele, Samsung Irex)
139	M&L SS 200 mm Bottle pullout complete all as specified and direted. ( Make : Hettich, Hafele, Samsung Irex)
140	S&F ICON (SS 304)towel ringincluding a pair ofCP brass bracket complete all as specified .
141	S&F in repair stainless steel plate rack of size60x60x25cm made with 1.0mm thick sheet including taking out existing plate rack complete all as specified and directed
142	S&F 100mm long extruded fancy D\" type type SS handle for kitchen cup boards shutters, cabinets, crockery shelf drawers fixed with nuts , screw and washer complete all as specified and directed.
143	Packing and transportation of luggage (approx 6 tonne)using moterable transport within 10 km radius to include:-(a) Removal from old locationand fixing such asAC (01), TV (01), Washing machine (01), RO (01),Dish Antenna (01) Dish washer (01) atnew location including transportation. (b) Transportation of 2 wheeler and four wheelers not included.
144	Cutting shrubs, wild growth, plants not exc 30 cm girth grown on permanent structures and removingsame from roots and stopping the recurrence by injecting herbicide Glyphosate 4+solution (04 % concentrate) into plant root to eliminate further growth. Application shall be as per manufacturer instructions. The disturbed area shall be repaired with PCC (1:2:4) Type B0 mix and surface finished even and smooth in cm 1:4 incl applying two coats of matching finish of adjacent area.Minimum plant in each block is 10 Numbers complete all as specified and directed.
145	S&F for 5mm thick acrylic sheetof size 200mm x 300mmfixed on wall over suitable fastener border over the stonefor building insignia (letter size ht 100mm and 50 mm width)for numbering Qtrs complete all as specified and directed.
146	Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill)complete all as specified and directed.
147	M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders,framed balusters,walk ways, railings, framework of water tanks and similar work fixed in position including hold fasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed.
148	S&F in repair 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as approved by GE. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work and applying two coat of deco paint on all the surfaces of the jalli complete all as specified and as directed. Note : MS steel work will be measured and paid separately under relevant item of BOQ.
149	S& Fix repair Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples, size of mesh 20 mm, complete all as specified and directed.
150	M&L for heavy duty groove Tiles for Commercial & Public Parking of size 600x600 and minimum 12 mm thick suitable for high traffic and max grip and non skidetc set and jointed in neat cement slurry and using 3 mm thick pressure and fill epoxy on tile joint over 20mm thick screed bed in CM 1:4 complete all as specified and directed.
151	STRUCTURAL ITEMSM&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 43 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 25 metre height) complete all as specified and directed.Notes :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b)When polymix concreting in taking condition,guniting is done with polycretes admixture @ 2% by weight of cement all as per manufacturers instructions (Polycretes admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
152	M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 14 mm dia hole suitable for inserting 10 mm dia reinforcement bars complete all as specified & directed .
153	M& L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars complete all as specified and directed.
154	S&F TMT bars 5 mmdia upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips includingU-shaped stirrups with necessary welding required at site and all as directed and specified.
155	Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer\"s instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge.Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealant.Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements. upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed.
156	Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed.
157	M&L for followings upto G+11 stories bldgs height incl necessary scafolding complete all as specified and directed.:-(i) Removing plaster & finishes all around the columns, slabs & beams(on all four side of column to full height , three sideof beam to entire span & bottom of slab to area as directed)(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved. Supply & applying of rust removing chemical to remove rust from existing reinforcements.(The Engr-in-charge may order sand blasting if rust is visible)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out.
158	M&L for providing PMM (Polymer modified cementitious mortar) upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed. :-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer
159	(B) STRUCTURAL ITEMSM&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 43 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 25 metre height) complete all as specified and directed.Notes :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b)When polymix concreting in taking condition,guniting is done with polycretes admixture @ 2% by weight of cement all as per manufacturers instructions (polycretes admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
160	M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 14 mm dia hole suitable for inserting 10 mm dia reinforcement bars complete all as specified and directed.
161	M&L for fixing rebar of required length & diameter for structural connection in RCC slab, Beamsand similar situations including power drilling holes of appropriate diameters in reinforced or plain concrete upto depth minimum 100 mm or as per manufacturers specification, fixing the reinforcement in position using epoxyArcylate based anchoring adhesiveat all heights and levels, 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars complete all as specified and directed.
162	S&F TMT bars 5 mmdia upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips includingU-shaped stirrups with necessary welding required at site and all as directed and specified.
163	Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer\"s instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge.Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealant.Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements. upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed.
164	Supply and applying of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed.
165	M&L for followings upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed. :-(i) Removing plaster & finishes all around the columns, slabs & beams(on all four side of column to full height , three sideof beam to entire span & bottom of slab to area as directed)(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved. Supply & applying of rust removing chemical to remove rust from existing reinforcements.(The Engr-in-charge may order sand blasting if rust is visible)(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out.
166	M&L for providing PMM (Polymer modified cementitious mortar) upto G+11 stories bldgs heightincl necessary scafolding complete all as specified and directed.:-(i) Dry sub strata surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.Note :Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer.
167	INTERNAL ELECTRIFICATIONTaking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittingsetc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.
168	M&L for point wiringwith PVC insulated unsheathedmulti strandedFRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked andits accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- Make : Havells, Polycab, RR Kabel
169	One Light Point controlled by One No, One way 5 Amp Switch.
170	One Ceiling Fan/Exhast Fan Point controlled by One No, One way 5 Amp Switch.
171	One Light Point controlled by Two Nos, Two way 5 Amp switches.
172	One Bell/Buzzer Point controlled by One Bell Push button
173	One Three Pin 5 Amps Socket Outletpoint controlled by One No, One way Switch on Independent Board.
174	One Three Pin 5 Amp Socket Outlet Point controlled by One No, One way switch on same board.
175	All as per item No. 168 here in before but with 2.5 sqmm (for Phase, Neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.
176	Note for item No 168 & 169 above:- (i)Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii)No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.
177	S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating complete all as specified and directed.:-
178	Single Pole 6 Amp rating. Make : Legrand Arte Cat Part No 573400 , Havells (Murano)- ACUSXXW101, Schneider- X1001WH.
179	Bell Push Single Pole 6 Amp rating. Make:- Havells (Murano)- ACUSBXW101, Legrand - 673404 , Schneider-X1005WH
180	Single Pole 16 Amp rating. Make : Legrand Arteor Cat Part No 573410, Havells (Murano)- ACUSXXW161,Schneider-X1101WH
181	All as per item No. 170 here in before but 2 way 6 Amps. Make:Legrand Arte Cat Part No 573402 or equivalent in Havells(Murano)- ACMSXXW102 ,Schneider-X1002WH
182	S&F Modular Socket outlet shutter type flush mounting type, 230/250 Volts grade (As catered in point wiring above) of following ratings complete all as specified and directed.:-
183	2/3 Pin 6 Amp Combined 2 module type.Make:- Legrand.Cat Part No 573470,Havells (Murano) - ACUKXXW063, Schneider-X2005WH
184	2/3 Pin 16 Amp combined 2 moduletype. Make : LegrandCat Part No 573471, Havells (Murano) - ACUKCXW163, Schneider- X2106WH
185	S&F electric bellAC 230 Volt ding-dong type ccomplete all as specified and directed. Make: Havells- AHLLXXR000 or equivalent in Legrand/Schneider.
186	S&F ceiling rose 3 phase / PVC/polycarbonated, isolated body ISI Marked complete all as specified and directed.
187	Supply, installation of set of modular socket with box, switch plates for telephone & data cables of shuttered RJ 11 type with suitable surface / concealed boxes complete all as specified and directed. Make: Havells (Murano) - ACUKNWW111or equivalent in Legrand/ Schneider.
188	Supply, Installation Testing and Commissioning of Modular type TV signal Single socket complete with non metallic inner & outer plates, suitable metal boxes, etc. on surface/ recess with all necessary accessories as required complete all as specified and directed. Make: Havells (murano) - ACUKTOW001 or equivalent in Legrand/Schneider.
189	Supply and fixing of Modular MCB SP 16Amps 240V 10 KA, C-Curve, fitted in main switch board, including 2.5 sqmm wire connecting power socket & modular MCB including taking out old unsv sheet metal enclosure of any type complete all as secified and directed by Engr-In-Charge.Make: Havells Cat No. DHFNCSPA016,LK (L&T) -CB93101KW16, Schneider Cat Part No P8016-N.
190	Disconnecting mains connection and taking out old distribution board any way SPN with 200 amp rated bus bar complete with MCB and making goodto the disturbed surface complete all as specified and directed.
191	S&F MCB DBs Single pole with neutral, Sheet metal enclosures double door type, 240 Volts, with suitable bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete without MCB and with enclosures blank plate for unused way suitable for 12 Way including cutting chases and making good to walls. Make : Legrand 507612, LK (L&T) - BH112DDB, Schneider A9HSND12.
192	S&F in replacment ofMCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note : Make of the MCB should be the same as that of DB
193	(a) MCB SP 5 to 32 Amps
194	(b) MCB DP 40 tp 63 Amps
195	S&F in LED Tube light fittings 10 Watts (Approx Size 2 Feet) 230 Volts AC complete including connecting up with three core twisted flexible copper conductor cable having minimum P.F>0.95, minimum efficacy 100 Lumen/Watt, IP-20 Rating complete all as specified and directed. Make : Bajaj/Crompton/Philips
196	S&F in LED Tube light fittings 20 Watts (Approx Size 4 Feet) 230 Volts AC, box type complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable of suitable size having minimum P.F>0.95, minimum efficacy 120 Lumen/Watt, IP-20 Rating complete all as specified and directed. Make: Bajaj Cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton Cat Part No CCS-100-20-65-HL2-OP-NWH, Philips Cat Part No BN308C LED20S-6500 L120 PSU WH
197	S&F in replacement Bed side reading light , Wall mounteddecorative bedlightLED light of 2W goosenek arm easy to adjustpremium material white metal 75lm/3000Kand finish energy saving with LED light source fixture complete all as specified and directed. Make: Philips CAT Part No.30975, Legrand, CAT Part No.Lyncus Reading light 677316, IKEA Nymne CAT Part No.GU573671.
198	S&F in LED Bulkhead fittings 12 Watts 230 Volts AC, complete with LED Light & all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Phillips, Crompton, Bajaj
199	S&F in replacement of aesthetically designed decorative warm white LED mirror light of07W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and as directed. Make : Philips Model No 31402, Murphy Cat Part No MLDL 3 in 1 Mirror WOOD 12W-02, FILLISKA-1239.
200	S&F in replacement aesthetically designed Wall mounteddecorative wallLED light of 15 Wfixture with opal diffuser to give glare free light including suitable LED lamp of 15 W, complete all as specified & directed.Make: PhilipsCAT Part No. Muziris 31434, LustreCAT Part No. Li 3618/IW, WiproCAT Part No.BW06
201	Taking down old unsv exhaust fans of any type/size complete in all respect complete all as specified and directed.Note : Old unserviceable Exhaust Fans shall be deposited to the MES Store and be taken on charge under demolition/salvage register.
202	Supply and Fixing in replacement of Metal Body Exhaust Fans 300 mm sweep, 230 Volts, 50 Hz including louvers. The rate should inlcude making proper arrangements for fixing i.e. Cutting Bricks/Stone Boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed. Make:- Havells- VENTILAIR DB , Bajaj- MAXX AIR ,Crompton- DRIFT AIR PLUS.Note:- The rate includes making proper arrangement for fixing ie cutting bricks/stone boulders of appropriate size and finishing the surface with cement complete all as specified and directed by Engr-in-charge.
203	Supply and Fixing of PVC Body Exhaust Fans 250 mm sweep, 230 Volts, 50 Hz including louvers. The rate should inlcude making proper arrangements for fixing i.e. Cutting Bricks/Stone Boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed. Make:-Usha Modern Crisp Air VX/ Bajaj maxima Neo 250/Havells VENTILAIR DX
204	Taking down/ dismantelling ceilingfan,size 1200mm including fan bladecomplete in all respect complete all as specified and directed.Note : Old unserviceable Ceiling Fans shall be deposited to the MES Store and be taken on charge under demolition/salvage register.
205	Supply and fixing in replacment BLDC ceiling fan 1400 mm sweep, minimum air delivery 210 CFM, with remote 230 volts having full copper motor & ribbed aluminium blades for higher air delivery, powder coating provides longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified & directed . Make :Atomberg Efficio Model No EFC21435RM or equivalent in Havells, Crompton, Bajaj, Orient
206	M&L for Re-fixing of ceiling fans 1200 mm sweep in position after carrying out basic repairs like replacement of bearings, balancing the blades, lubrication, change of faulty wiring or capacitor and spray painting (white color) with synthetic enamel paint by spraying including filling cavities with filler to reach upto satisfied finish of painting after thorough cleaning and preparation of surfaces complete all as specified and directed by Engr-in-Charge.
207	Supply and fixing in replacment Electric Water Heater of Capacity 25 Litres, BEE 5 Star rated heating element upto 2 KW with glass line inner tank with whirlflow technology, Mg anode rod, IPX4 high strength polymer body complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. Note : The contractor needs to submit manufacturing warranty of geyser of minimum two years to Engr-in-Charge.Make : Bajaj Armour series Pentacle , Havells Adonia R, Crompton Solarium CARE.Note : Old unserviceable Geysers any type/Cpapcity shall be deposited to the MES Store and be taken on charge under demolition/salvage register.
208	Taking down old sub main wiringany sizealuminum/copperconductor cable and 1X10 sqmmfrom the concealed conduit from the wall/ceiling and making good to the disturbed surface complete all as specified and directed.
209	M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x10sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. Make- Polycab, Havells, RR KABEL, KEI, Finolex
210	M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x4sqmm completedrawn in new PVC concealed conduitand its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi strandedFRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. Make- Polycab, Havells, RR KABEL, KEI, Finolex
211	M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25 X 4 mm bolted (with GI nuts, bolts & check nuts) and rivetedto earth (Plate) electrode at one end and connected to main switch boardtest point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0using 12 mmgraded crushed stone aggregate, RCC cover etc.
212	S&F Earth continuity conductor of size 25x4 mm Aluminium stripfixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed.
213	Supply & fix of factory made load line DB\"s double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way V-TPN 415 Volts, IP 54 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete and including taking out old unsv DB any type/size and cutting chases and making good to walls complete all as specified and directed. Make : Legrand or equivalent in L&T / Schneider.
214	Supply fix of MCCB 4-Pole 80 Amp, 16 kA Thermal Magnetic type complete all as specified and directed.Make : Legrand or equivalent in Schneider, LK (L&T)
215	S&F rigid non-metallic PVC conduit medium grade 20 mm dia for telephone cable complete with all fixing accessories complete all as specified and directed.
216	S&F wall mounted electric chimney of minimum width 60cm, having suction power not less than 1350cum/Hr, with stainless steel outer layer, with 3 speed motor with decorative smart cooker hood SS/glass, energy efficient LED light with digital display including ducting,having auto clean function,noise level not more than 60dB, Control Panel- Touch & motion sensor control, including ducting as per site requirement complete all as specified and directed by Engineer in Charge. Make :- . Note- The rate quoted by the contractor will include ducting length required from the chimney to the exhaust hole. ELICA -CURVE-FL-600-HAC-LTW-MS NERO, HINDWARE - NV10PLUS60, FABER- HOOD PRIMUS PLUS 1WH.
217	Supplying, testing and commissioning of following capacity Sandwich Type Bus Trunking for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with metal clad enclosure as integral earth having IP-55 for indoor after fixing the adopter boxes and all accessories, made of 1.5mm/1.6mm thick GI sheet steel duly painted with color shade RAL-7035 or equivalent, complete with 4 Nos. aluminium bus bars withTin plating throughout the length and class-F Insulation(155Deg C) and Impulse withstand 12KV,at nominal current rating having ambient temperature of 40 deg. C, CE marking on Busway mandatory for each element which require to confirms the safety, health and environment protection standards including necessary joints, elbow joints, bends, adopter box and copper flexible for end terminations, including suspenders, angle bracket etc. as required. Rating 800A, SC 40KA for 1 sec. Make : Legrand, Schneider, LK (L&T)
218	Straight Length Feeder
219	Flange End (Fabrication Cost Only)
220	Spring Hangers
221	End cover
222	Design, fabrication, supply, installation, testingand commissioning of following End Feed box fabricated out of 14G CRCA painted or powder coated (as approved) sheet steel for the Rising Mains with provision of MCCB of 800A, 4-Pole (but without MCCB). The End Feed Box shall be totally assembled complete with solid aluminium busbarlinks ofrated capacity of MCCB to Risings Mains. The End Feed box should be complete with suitable size of glands plate for incoming cables, including shrouding of terminal ends complete all as specified and directed.
223	Supply of Tap-off box housing, fabricated out of 14G CRCA painted or powder coated (as approved) sheet steel. The tap-off box should be factory fabricated and complete with solid aluminium links of rated capacity from MCCB to rising mains and suitable size of gland plate etc. The tap-off box shall be suitable for termination ofXLPE insulated Al. conductor armoured cable including shrouding of terminal ends as required complete all as specified and directed.
224	Supply of following 4-Pole MCCBs of breaking capacity as called, for fixing in the incoming Tap-off box complete all as specified and directed.
225	63 Amp, 4-Pole thermal magnetic MCCB, Short Circuit 16 kA for 1 sec with 1 set sprdr Links for Tap Off Boxes
226	800 Amp, 4-Pole, Thermal magnetic MCCB Short Circuit 36 kA for 1 sec with 2 set sprdr Links & 1 Ext. Rot Handle for End Feed Box
227	M&L for cable XLPE insulated screened PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of240 Sqmm 3.5 Core laid in Trench/wall/floor with clip complete including taking out old unsv cable complete all as specified and directed.
228	Excavation in trenches in soft/loosesoil not exceeding 1.5 mtr wide in not exceeding 1.5mtr in depthforUG cableetcin soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and directed.
229	Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
230	Removing excavated material not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed.
231	M&L for sand cushioning (dry sand) to underground cable for cable protectionlaid in trenches / in existing cable ducts complete all as specified and directed.
232	M&L for brick laying with subclass \"B\" bricks well burnt, laid dry flat in trenches for protection of cable over cable, complete all as specified and directed.
233	S & F of instant hot water Geyser of 5 ltrs capacity,vertical type with suitable size of fastner and incl provision and connecting of SS braided pipe with adopter for inlet and outlet water connection, copper element should be corrossion resistant, antiscaling magnesium anode, and inner tank material of superior glass lined tank having heating element of minimum 2.5 kW complete all as specified and directed. It should haveminimum two year warrenty on product & minimum three year warrenty on heating element complete all as specified and directed.Make: CromptonCAT Part No.Rapid Jet 5-L, BajajCAT Part No.SHIELD SERIES VERRE PLUS IWH, AO SMITHCAT Part No.EWS-5L

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Certain Offers Md Accommodation At Sangli Apartments Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Certain Offers Md Accommodation At Sangli Apartments Under Ge New Delhi, Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us