Clearing grass & removal of rubbish upto a distance of 50m outside the periphery of the area etc. complete to shape as per direction of the Engineer-in-charge.
2
Scraping,cleaning the road surface,applying tack coat using 3.0Kg of bitumen for 10 Sqm & laying 37.5mm thick built up spray grouting using 0.45 Cum of 25mm to 40mm size h.g.metal & 12Kg penetration grade of bitumen for 10 sqm in each layer with 0.12cum of 12mm size h.g.chips as key stone for 10 sqm,spreading over and laying heating,pouring and spreading bitumen over metal,chips & rolling with PRR including hire & running charges of PRR & all other machineries including cost of all materials,labour ,T&P ,royalty etc. complete as per direction of EIC.
3
Cleaning of existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous coarse including cost of all labour ,T&P etc. complete as per direction of EIC.
4
Applying primer coat on prepared bed with bitumen emulsion(S/S) @ 6Kg/10 Sqm area over granular surface etc. complete to shape as per direction of the Engineer-in-charge.
5
Providing & applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.2kg / sqm on the prepared bituminous/granular surface cleaned with mechanical broom etc. complete to shape as per direction of the Engineer-in-charge.
6
Providing 20 mm thick premix caepet using 0.27 cum of 13.2 mm to 5.6 mm size crushed stone chipping & 14.6 kg penetration grade of bitumen per 10sqm including laying to proper camber & consolidation with PRR with cost & conveyance of materials, labour, T&P, royalty & taxes etc. complete as per direction of the Engineer-in-charge.
7
Providing 6 mm thick precoated seal coat type -B using 0.06 cum of 6.7 mm size chips & 6.8 kg of bitumen per 10sqm including consolidation with PRR, cost & conveyance of materials, labour, T&P, royalty & taxes etc. complete as per direction of the Engineer-in-charge.
8
Blinding road surface with moorum including cost of material,rolling with PRR, labour, T&P, royalty & taxes etc. complete as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
