|
| 1 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed by Engr-in-Charge. |
| 2 | Material and labour for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, upto double story complete all as specified and as directed by Engr-in-Charge. |
| 3 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 4 | Material and labour for Rendering (External) 15mm thick in CM 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed by Engr-in-Charge.NOTE: WPCshall be Measured and Paid under appropriate Item. |
| 5 | Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified and as directed by Engr-in-Charge. |
| 6 | Material and labour for Rendering (Internal) 12mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed by Engr-in-Charge. |
| 7 | Material and labour for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and labour for preparing newly Plastered surfaces of Walls by brooming down plastered surfaces and appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved TintaboveExterior wall primer aboveExterior wall putty up to 1.50mm thickness in one coat. Thepaintshall be applied with Thread Roller. (as per Manufacturer\"s instructions), complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material and labour for preparing newly Plastered surfaces of Walls by brooming down plastered surfaces and appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved Tint aboveone coat of Exterior wall primer. The paint shall be applied with Thread Roller. (as per Manufacturer\"s instructions), complete all as specified and as directed by Engr-in-Charge. |
| 10 | Material and labour for preparing for old decorative plastered surfaces of Walls by brooming down plastered surfaces of old work and cleaning old decorated surfaces using steel wire brush sand paper and scraping downwith and including filling cracks upto 3mm usingCrack sealand appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved Tint. The paint shall be applied with Thread Roller. (as per Manufacturer\"s instructions), complete all as specified and as directed by Engr-in-Charge. |
| 11 | Material and labour for preparing New Plastered Surfaces of Walls by applying a Coat of 1.50mm Wall Care Puttywith and including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion over a Coat of alkali resistantPrimer, complete all as specified and as directed by Engr-in-Charge. |
| 12 | Material and labour for for Complete Removal of existing Treatment and applying Wall Care Putty1.5 mm thick, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion, complete all as specified and as directed by Engr-in-Charge. |
| 13 | Material and labour for preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed by Engr-in-Charge. |
| 14 | Dismantling cement concrete (reinforced) of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended workand removing debris etc to out side of MD/AF land complete all as specified and as directed by Engr-in-Charge. |
| 15 | Material and labour for for tubular trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engr-in-Charge. |
| 16 | Material and labour for for preparation of new steel and Iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed by Engr-in-Charge. |
| 17 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. |
| 19 | Supply and fixing in Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long and dia of bolt exc 12mm and n.exc 20mm complete all as specified and directedby Engr-in-Charge. . |
| 20 | Material and labour for for Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fixing in AluminiumPowder coatedframe work suspension system consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle, wall angle fixed on PVC dash fastners on the perimeter of the wall by steel screws with distance 300mm c/c main runners plqaced #@ 1200, Cross Tee 1200mm inserted in the pre-cut slots of main runner aqt5 a regular interval of 600mm to form a modular grid of 1200mm x 600mm and additinal cross tees of 600mm placed perpendicular to the cross Tee 1200mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be hang with ceiling cleatscomplete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fixing in16mm thick mineral fibre ceiling tiles of dimension 595x595mm with humidity resistance 99%, thermal conductivity K = 0.052-0.057 w/mK colour white, fire performance UK Class 0/Class 1 (BS 476 Pt-6&7) suitable for green building applicationwith recycled content not less than 30% and relight reflectance not less than 85% and NRC of 0.55 to 0.60 duly fixed on grid frame work with steel screws complete all as specified and directed by Engr-in-Charge. |
| 23 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 24 | Material and labour for for 20-25mm thick machine cut kota stone slab flooringlaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing completeover 15 mm thick screed bed in CM (1:3) .complete all as specified and directed by Engr-in-Charge. |
| 25 | Material and labour for for 20-25mm thick machine cut kota stone slabin riser of steps, skirting, dado and pillar over 15 mm thick cement plaster using CM (1:4) .complete all as specified and directed by Engr-in-Charge. |
| 26 | Taking down chowkhat Frame with shutters (without taking off Shutter from the Frame) n. exc. 1.50 Square MetreEach, complete all as specified and as directed by Engr-in-Charge. |
| 27 | Taking down chowkhat Frame with shutters (without taking off Shutter from the Frame)exc. 1.50 Sqm but n.ex 4 SqmEach, complete all as specified and as directed by Engr-in-Charge. |
| 28 | Supply and fixing in factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screwwithdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including M.S. hold fast/ lugs or SS dash fastenersas per direction of Engineer-in-Charge. |
| 29 | Supply and fixing in factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 30 | Supply and fixingmildSteel Butt Hinge 100mm longmedium weight and fixed, complete all as specified and as directed by Engr-in-Charge. |
| 31 | Supply and fixingAluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed by Engr-in-Charge. |
| 32 | Supply and fixingAluminium Handle 150mm long, Cast type, anodised, complete all as specified and as directed by Engr-in-Charge. |
| 33 | Suplly and fixing in Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type)250 mm long and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiumalloy and fixed specified and all as per direction of Engr-in-Charge. |
| 34 | Supply and fixing in Stainless Steel Curtain Rod 25mm dia/bore(as approved) includingfixing stainless steel Bracket (shaped as approved) not less than 80mm longto wall with Screws/ securedwith stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed by Engr-in-Charge. |
| 35 | Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 36 | Material and labour for Granite (of any type) Tiles 18mm thick machine cut, bedded and jointed with and including grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-Charge. |
| 37 | Material and labour forGranite (of any type) Tiles 18mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with and including white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-Charge. |
| 38 | Material and labour for Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and with and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 39 | Material and labour for Coloured/Printed Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and with andincluding Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 40 | Supply and fixingAngular Stop Cock fancy type with wall flange 15mm bore (dia) complete all as specified and as directed by Engr-in-Charge. |
| 41 | Supply and fixingHand shower (Health faucet)(ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flex tube & ABS wall Hook including making connection and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 42 | Supply and fixing in in repairs Vitreous China White Squatting Pan of size 500x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision Concrete Bedding and Making Good to distrubed surfaces , complete all as specified and as directed by Engr-in-Charge. |
| 43 | Supply and fixing in in repairs Single piece WC with UF soft closet, seat cover,hinges, fixing acessories including flushing cistern sizee (510x295x520mm ) includibg S trap 300mm, health faucet and jet spray incl. connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete all as specified and directed by Engr-in-Charge. |
| 44 | Material and labour for in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, Flush Pipe of polyetylene of high density or PVC 32 mm dia for low level cistern of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3, complete all as specified and as directed by Engr-in-Charge. |
| 45 | Supply and fixing in PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed by Engr-in-Charge. |
| 46 | Supply and fixing in mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engr-in-Charge. |
| 47 | Material and labour in repair Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete all as specified and as directed by Engr-in-Charge. |
| 48 | Supply and fixing in in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed by Engr-in-Charge. |
| 49 | Supply and fixing in PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 50 | Supply and fixing in PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 51 | Supply and fixing in PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 52 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed by Engr-in-Charge. |
| 53 | Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed by Engr-in-Charge. |
| 54 | Supplying and laying of 20mm outer dia CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge. |
| 55 | Supplying and laying of 25mm outer dia CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge. |
| 56 | Supply and fixing in Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed by Engr-in-Charge. |
| 57 | Supply and fixing in in repairtable mounted china ware wash basin Make : JaquarCat Part No JDS-WHT-540with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed by Engr-in-Charge. |
| 58 | Supply and fixing in in repairs Pillar taps, cast copper alloy, Fancy type , chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge. |
| 59 | Supply and fixing in in repairTowel Rail 450mm long of PTMT fixed with and includingChromium Plated brass screws and wooden/plastic cleats (Minimum weight 170 gms) complete all as specified and as directed by Engr-in-Charge. |
| 60 | Supply and fixing in in repair Mirror 600x450mm in size, Beveled Edge of Selected quality Glass, fixing with Brass Chromium Plated Knobs/Spacers 25mm to 30mm size (One Each in Corner), complete all as specified and as directed by Engr-in-Charge. |
| 61 | Supply and fixing in in repair Glass Shelf (Bath Tray) Accessories 45x15 Cm in size , complete all as specified and as directed by Engr-in-Charge. |
| 62 | Supply and fixing in aluminium alloypowder coated aluminium sliding windows three track with movable shutters (slinding on minium two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :-(a) Window Frame- 75mmx35mmx1.48mm thick(b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over(c) Aluminium beading /clips - 0.7mm thick(d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperatuyre 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e)Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed by Engr-in-Charge. |
| 63 | Material and labour for for formwork of fair finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n.exc 20cm wide and side ofRCC/PCC Bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20 cm wide as specified anddirected by Engr-in-Charge. |
| 64 | Material and labour for for reinforcement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. |
| 65 | Use & waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves inclsupports, overhangs,etc. also splays between floors and beams and finished concrete surfaces flat and fairetcall as specified and directed by Engr-in-Charge. |
| 66 | Material and labour for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending spirally for hookings for cols, hooking ends and binding with and including mild steel wire (aneeled) not less than 0.9mm dia.all as specified and directed by Engr-in-Charge. |
| 67 | Material and labour for TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.all as specified and directed by Engr-in-Charge. |
| 68 | M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 69 | Excavation in post holes (or similar holes) in hard/dense soil each n.exc 0.5cum getting out, returing, filling in and raming earth/broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 70 | Material and labour for for cement concrete type C-2 1:3:6 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified anddirected by Engr-in-Charge. |
| 71 | Material and labour for for cement concrete type 1:3:6 Type C-1 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates (bed bloock), troughs and the like including water trough, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge. |
| 72 | Taking down Copper/Aluminium Point Wiring (Light, Fan, Socket, Power Socket) including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting, etc. and Making Good Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed by Engr-in-Charge. |
| 73 | Taking down the existing unservicable Sub-main Wiring of any type and any description as existing at Site including Making Good the Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed by Engr-in-Charge. |
| 74 | Material and labour for Taking down Ceiling Fan,Exhaust fan, wall fan of any make any size and removing to AGE E/M Store Yard,Re-hanging the same in Original Position and providing Electric Connection,complete all as specified and as directed by Engr-in-Charge. |
| 75 | Material and labour for Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable drawn through and including Rigid Non- metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealedwith necessary grouting of required size and depth on Wall and making Good in Cement Mortar 1:3 mounted on 1.6mm thick Sunk Mild Steel Pressed Terminal Box of suitable size for modular fittingduly painted with Red Oxide Metal Primer with modularSheet Top Cover for mounting Switches, Sockets, Fan Regulators, etc. including 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor connected to Common Earth dolly for ONE LIGHT/FAN POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP, complete all as specified and as directed by Engr-in-Charge. |
| 76 | Material and labour for Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealedwith necessary grouting of required size and depth on Wall and making Good in Cement Mortar 1:3 mounted on 1.6mm thick Sunk Mild Steel Pressed Terminal Box of suitable size for modular fittingduly painted with Red Oxide Metal Primer with modularSheet Top Cover for mounting Switches, Sockets, Fan Regulators, etc including 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor connected to Common Earth dolly for ONE 5 PIN SOCKET OUTLET 6 AMP ON INDEPENDENT BOARD, complete all as specified and as directed by Engr-in-Charge. |
| 77 | Material and labour for Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSHmulti-stranded single core Copper Conductor Cable drawn through and including Rigid Non- metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed with necessary grouting of required size and depth on Wall and making Good in Cement Mortar 1:3 mounted on 1.6mm thick Sunk Mild Steel Pressed Terminal Box of suitable size for modular fittingduly painted with Red Oxide Metal Primer with modularSheet Top Cover for mounting Switches, Sockets, Fan Regulators, etc including 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSHmulti-stranded single core Copper Conductor Cable (Green Colour) as Earth Continuity Conductor connected to Common Earth dolly for ONE 6 PIN SOCKET 16 AMP ON INDEPENDENT BOARD, complete all as specified and as directed by Engr-in-Charge. |
| 78 | Supply and fixing in Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in INCLUDING CONDUIT complete all as specified and as directed by Engr-in-Charge.Note: Item No. 78 & 79:-2 runs of main wire and 1 run of earth wiere shall be measured and paid as unit length. |
| 79 | Supply and fixing in Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in INCLUDING CONDUIT complete all as specified and as directed by Engr-in-Charge. |
| 80 | Supply and fixing in Modular switch,flushtype single pole, one way 6 Amp, complete all as per specified and as directed by Engr-in-Charge. |
| 81 | Supply and fixing in Modular switch, flushtype single pole, one way 16 Amp,complete all as per specified and as directed by Engr-in-Charge. . |
| 82 | Supply and fixing in Modular Socketoutlet 2 in 1,3 pin, 6A,complete all as per specified and as directed by Engr-in-Charge. |
| 83 | Supply and fixing in Modular Socketoutlet 2 in 1,3 pin, 6 and 16 amp flush type,complete all as per specified and as directed by Engr-in-Charge. |
| 84 | Supply and fixing in Fan Regulator in 5 Step type, Single Pole, 230 Volt, Electronic type and Fixing-in-repairs, complete all as specified and as directed by Engr-in-Charge. Make-ISI Marked. |
| 85 | Supply and fixing in Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body,complete all as specified and as directed by Engr-in-Charge. |
| 86 | Supply and fixing in Decorative Slim Linear LED Lighting Fixture with Extruded Polycarbonate, Environmental Friendly, Energy Efficient9.0 Watt LED 6500K and Connecting up with and including Copper Conductor Cable of size 23/0.0076 multi-stranded, 3 Core from Ceiling Rose to Light Fitting and , complete all as specified and as directed by Engr-in-Charge. |
| 87 | Supply and fixing in Decorative Slim Linear LED Lighting Fixture with Extruded Polycarbonate, Environmental Friendly, Energy Efficient 20 Watt LED 6000K and connecting up with and including Copper Conductor Cable of size 23/0.193 multi-stranded, 3 Core from Ceiling Rose to Light Fitting, connecting up and , complete all as specified and as directed |
| 88 | Supply and fixing inrecess mounted LED luminaire, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V,with and including constant current electronic drivercomplete with all accessories with and including 36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed. |
| 89 | Supply and fixing in in repair recess Mounted LED downlighter, round or sequre, having glare free frosted diffuser, operating voltage 180-270V, with constant cureent electronic driver complete with all accessories with and including 15 watt LED and including all accessories,mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and as directed by Engr-in-Charge. |
| 90 | Supply and fixing in in repair MCB Single Pole, 6 to 40 Amp (as directed), 240 Volt, AC, \"B\" Series for fixing on MCB DB’s, 10 kA, 50 Hz including Connecting up and , complete all as specified and as directed by Engr-in-Charge. |
| 91 | Supply and fixing in in repair MCB Single Pole & Neutral,63 Amp, 240 Volt, AC, \"C\" Series for fixing on MCB DB’s, 10 kA, 50 Hz including Connecting up and , complete all as specified and as directed by Engr-in-Charge. |
| 92 | Supply and fixing inMCB DB 6-way, Single Pole & Neutral, Double Door type, Regal Grey Colour, Sheet Steel Phosphatised, Powder Coated with 63 Amp rate Bus-bar, Neutral Link Earth Bar & Din Rail duly embedded/Concealed upto Wall surfaces including Connecting up with Existing Cable Incoming and Outgoing with Cable Lugs as per the Site requirement and and Making Good Disturbed Surfaces of Walls/Roofs/Floors, etc, complete all as specified and as directed by Engr-in-Charge. |
| 93 | Supply and fixing in in repair MCB DB 8-way, Single Pole & Neutral, Double Door type, Regal Grey Colour, Sheet Steel Phosphatised, Powder Coated with 63 Amp rate Bus-bar, Neutral Link Earth Bar & Din Rail duly embedded/Concealed upto Wall surfaces including Connecting up with Existing Cable Incoming and Outgoing with Cable Lugs as per the Site requirement and and Making Good Disturbed Surfaces of Walls/Roofs/Floors, etc complete all as specified and as directed by Engr-in-Charge. |
| 94 | Supply and fixing in in repair Load LineTPN DB 4-way Enclosure Double Door including MCCB 100 Amp rating, 16 kA, 4 Pole and suitable for 415 Volt 50 Hz AC Supply including electrically connecting up and , complete all as per specified and directed by Engr-in-Charge. |
| 95 | Supply and fixing in of XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor, 1100 Volt grade, Cross sectional area 50 Sqmm 3½ Core with suitable size Aluminium Thimbles including jointing and testing, complete all as specified and as directed by Engr-in-Charge. |
| 96 | Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for laying of UG Cable/Pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed by Engr-in-Charge. |
| 97 | Excavation/Cutting Road/ Hardstanding in Trenches not exc. 1.50 Meter wide and not exc. 1.50 Meter in depth and getting out, complete all as specified and as directed by Engr-in-Charge.NOTE : Quoted Unit Rate shall deem to be included Materials and Labour required for repairing to damaged Road/ Hardstanding to match the existing Surfaces and Specifications. |
| 98 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in Soft/ Loose Soil, complete all as specified and as directed by Engr-in-Charge. |
| 99 | Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed by Engr-in-Charge. |
| 100 | Material and labour for Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed by Engr-in-Charge.NOTE : (i).For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured. |
| 101 | Material and labour for Galvanised Steel Tubing Pipe 50mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed by Engr-in-Charge. |
| 102 | Supply & laying in Trenches Sub-class ‘B’ Bricks, kiln burnt, for Cable Protection, complete all as specified and as directed by Engr-in-Charge. |
