|
| 1 | M & L for dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 2 | Dismantling aluminium partition with galss and particle board incl all connecting accessories and removing outside MD land complete all as specified and directed. |
| 3 | M & L for Anodised aluminium powder coated frame for doors, windows, ventilators, Partitions with one or more rebates including joining cleat for fixing etc. complete all as specified including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 4 | S&FStone / Marble glossy finish Aluminium composite panel (ACP) sheet 4 mm thick of selected quality cladding with silicon and 3M tape, fixed to wooden ,concrete ,brick, angle frame including aluminium grid frame of size 25x50x2mm thick in wall/ ceiling surfaces with necessary cleaning of surface and making surface even and smooth including scaffolding complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed. |
| 6 | S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and directed. |
| 7 | S&F Powder chrome finish frame with acrylic letter 3 mm thick with LED light and power supply connection and fixing arrangement of size 300mmx750 mm as per manufacture instruction complete all as specified and directed. |
| 8 | S&F Powder chrome finish frame with Stainless Steel letterswith LED light and power supply connection and fixing arrangement of size 300mmx750 mm as per manufacture instruction complete all as specified and directed. |
| 9 | S&F Powder chrome finish frame with acrylic logo 3 mm thick with LED light and power supply connection and fixing arrangement of size n exc 3 Sqm as per manufacture instruction complete all as specified and directed. |
| 10 | S&F Powder chrome finish frame with Stainless Steel with LED light and power supply connection and fixing arrangement of size n exc 3 Sqm as per manufacture instruction complete all as specified and directed. |
| 11 | S & F Decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 12 | S & F in repairs 18/19mm thick seluka ply as in shutters and cupboards complete all as specified and directed. |
| 13 | M & L for single piece toughned glass of thickness 8mm of area exc 1.5 sqm but n. exc 5.00 sqm with fixing to wooden cupboards complete all as specified and directed. |
| 14 | S & F decorative type beading as per sample approved by GE of cross section area n . exc 10 sqcm and fixing to cupboards complete all as specified and directed. |
| 15 | M & L for 12 mm thick toughned glass wall partition of height n exc 3.00 m including all fitting of top and bottom in chrome finish complete all as specified and directed. |
| 16 | S & F frosted film 50 micron for toughned glass as per sample approved by GE complete all as specified and directed. |
| 17 | S&F 12 mm thickfrosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, floor spring stainless steel 350mm long \"H\" Types glass door handle standard, locking arrangement and all other accessories and the edges of the glass should be properly moulded/grinded complete all as specified and directed. |
| 18 | M&L for complete removal of existing treatment & preperation of surfaces on walls and applying two coats of oil based distemper over one coat of alkali resistant primer over 3mm thick putty complete all as specified and directed. |
| 19 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified centre to centresize of grid 605x 605mm complete all as specified and directed. |
| 20 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 21 | M&L for fixing Seamless calcium silicate ceiling 12 mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed.Note : Frame work for ceiling shall be measured and paid separately. |
| 22 | M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 23 | Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and directed by Eng-In-Charge. |
| 24 | M&L for point wiringfor modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLScable 1100 volts grade drawn throughmetallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge for the following. (a)One light/bell/fan point controlled by one switch complete |
| 25 | All as per item No 24 here in before but One 3 pin socket out let 5 Amps on the independent board. |
| 26 | All as per item No 24 here in before but one 3 Pin socket out let 5 Amps on the same board. |
| 27 | All as per item No 24 here in before but with cable of size 2.5 Sq mm PVC insulated on independent boardfor power plug 15 Amps complete all as specified and directed by Eng-In-Charge. |
| 28 | S&F in replacement Modular switch one way 6A,1 Module, complete all as specified and directed by Eng-In-Charge. |
| 29 | S&F in replacement Modular switch one way 16A,1 Module,complete all as specified and directed by Eng-In-Charge. |
| 30 | S&Fin replacement Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed by Eng-In-Charge. |
| 31 | S&F in replacement Modular socket 16/15A-2/3 pin combined2 Module complete all as specified and directed by Eng-In-Charge. |
| 32 | S&Fin replacement 8/12/16 module open pvc box board complete all as specified and directed by Eng-In-Charge. |
| 33 | S &Fin replacement 3 pin plug top 6/16A, 240 V complete all as specified and directed by Eng-In-Charge. |
| 34 | S & Fin replacement white cover plate with frame, 3 module complete all as specified and directed by Eng-In-Charge. |
| 35 | S & F in replacement white cover plate with frame, 4 module complete all as specified and directed by Eng-In-Charge. |
| 36 | S & Fin replacementwhite cover plate with frame, 6 module complete all as specified and directed by Eng-In-Charge. |
| 37 | S & Fin replacement white cover plate with frame, 8 module complete all as specified and directed by Eng-In-Charge. |
| 38 | S & Fin replacement white cover plate with frame, 12 module complete all as specified and directed by Eng-In-Charge. |
| 39 | M&L for Sub main wiringin replacement complete with two run of6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductorFRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :-Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length. complete all as specified and directed by Eng-In-Charge. |
| 40 | M&L in replacementof sub main wiring complete with PVC insulated cable two run of04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -cappingwith accessories incl4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing-capping and its accessories will be measured and paid as one unit |
| 41 | S&F in replacement Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/gray colour complete all as specified and directed by Eng-In-Charge. |
| 42 | Supply and fixing in /replacement TPN double door DB 4 way incl civil work complete all asdirected by Engineer-in-Charge. |
| 43 | Supply and fixing in /repair replacement TPNdouble door vertical distribution board without mccb 6 way incl civil workcomplete all as directed by Engineer-in-Charge. |
| 44 | Supply and fixingin replacement sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp ratedbus barsand neutral links ( without MCB\"s) 08 ways SPN complete all asdirected by Engineer-in-Charge. |
| 45 | S & F in replacement MCB, TPN 415 volts, 63 Amps capacity complete all as specified and directed by Engineer-in-Charge. |
| 46 | S & Fin replacement MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F in replacement MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified anddirected by Engineer-in-Charge. |
| 48 | S&F Pluto Panel surface/recess mounted2\"x2\", 36/40 watt 3 in 1 colour ie WW/NW/CW colour LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination including connection up with twin core twisted flexible copper conductior cable with suitable size complete all as specified anddirected by Engineer-in-Charge. |
| 49 | S &Fin replacement recess/surface mounted circular LED slim fit low profile down lighter3 in 1 colour ie WW/NW/CW capacity 15 wattcomplete all as specified and directed by Eng-In-Charge. |
| 50 | S&Fin replacementdecorative wall mounting/Surface mounted round spot/focus light/mirror light CRCA body powder coated in white of capacity 12/15 wattcomplete all as specified and directed by Eng-In-Charge. |
