|
| 1 | Part - A (Type II - (Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth within CSIR-SERC/TTRS Campus leadas per the direction of Engineer-in charge. All kinds of soil |
| 2 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within CSIR-SERC/TTRS Campus lead as per the direction of Engineer-in charge. |
| 3 | Dismantling 15 to 110 mm diaPVC pipe lines including stacking of dismantled pipes with in CSIR-SERC/TTRS campus lead as per direction of Engineer -in-charge. Concealed/exposed on wall |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within with in CSIR-SERC/TTRS campus lead as per direction of Engineer -in-charge. Of area 3 sq. metres and below |
| 5 | Dismantling of W.C pan for all sizes including disposal of dismantilled materials i/c malba complete and stacking within with in CSIR-SERC/TTRS campus etc., complete all as per direction of Engineer-incharge |
| 6 | Dismantling tile work in floors and Walllaid in cement mortar including stacking material with in CSIR-SERC/TTRS campus lead as per direction of Engineer -in-charge. For thickness of tiles 10 mm to 25 mm. |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles size 300x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per direction of Engineer-incharge(Make - Johnson, Somany, Kajaria or equivalent) |
| 8 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. (Make-johnson, kajaria or equivalent) Size of Tile 600x600 mmas per direction of Engineer-incharge |
| 9 | Providing and laying Ceramic antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (Make - Johnson, Somany, Kajaria) |
| 10 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete all as per direction of Engineer-in-Charge.With granite stone of colour black, cherry / Ruby red of area less than 0.50 sqm. |
| 11 | Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour. Old work (two or more coats) (Make : Asian, Berger or equilvalent) |
| 12 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. (Make : Asian, Berger or equilvalent) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on old work (Make : Asian, Berger or equilvalent ) |
| 14 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surfaceincluding disposal of rubbish to the dumping ground, zinc rich primer coating of forsroc or Equivalent make etc.,complete all as per the direction of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | UPVCFixedwindow / ventilator with mullion/transom. Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm & above ) x ( 50 mm & above ). Height upto 0.90 metre)(Make : Feneta or equilvalent make) |
| 16 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.GraniteStone of approved shade |
| 17 | Renewing glass panes and refixing existing wooden fillets: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (Make : Saint Gobain or equivalent make) |
| 18 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete, size 125 mm. (Make : Godrej or equivalent make) |
| 19 | New Sanitary fiitings |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (Make-parryware or equivalent)W.C. pan with ISI marked white solid plastic seat and lid |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (Make-parryware or equivalent) |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. (Make: metro delux or equivalent) |
| 23 | Providing and fixing CP brass sink cockof approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore. (Make: metro delux or equivalent) |
| 24 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510 x 1040 mm bowl depth 250 mm. (Make: Hindware or equivalent) |
| 25 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms. (Make: metro delux or equivalent) |
| 26 | Providing and fixingStainless steel Hand shower (Health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook of product hookas directed by Engineer-in-charge, cutting and making good the walls. (Make: Hindware or equivalent) |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore.(Make: metro delux or equivalent) |
| 28 | Providing and fixingtwo way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal borewith wall flange as directed by Engineer-in-charge, cutting and making good the walls. (Make: metro delux or equivalent) |
| 29 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore.(Make: metro delux or equivalent) |
| 30 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length etc., all as per direction of Engineer-in-charge. (Make: Finolex or equivalent) |
| 31 | Providing and fixingapproved colour/shade of connection hose hot & Cold water as directed by Engineer-in-charge, cutting and making good the walls. |
| 32 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colourand making good the walls. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms. (Make: metro delux or equivalent) |
| 33 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc., all as per direction of Engineer-in-charge. |
| 34 | Constructing masonry Chamber 75x75x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 etc., all as per direction of Engineer-in-charge. |
| 35 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. a) 15 mm nominal dia (Make: metro delux or equivalent) |
| 36 | Providing and fixing C.P. brass shower rod with 15 or 20 mm inlet : 150 mm diameter (Make: metro delux or equivalent) |
| 37 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (Make: metro delux or equivalent) |
| 38 | Providing and fixing approved colour / shade of PVC floor Trap as directed by Engineer- in-charge, cutting and making good the walls |
| 39 | Providing and fixing CP Brass 32mm sizebrass Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(metro super deluxe or equvalent make) |
| 40 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (Make: metro delux or equivalent) |
| 41 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Make: metro delux or equivalent) |
| 42 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms |
| 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (Make: Leader or equivalent) |
| 44 | 25 mm nominal bore |
| 45 | 50 mm nominal bore |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Ashirvaad or equivalent make) |
| 47 | 25 mm nominal outer dia Pipes |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Ashirvaad or equivalent make) |
| 49 | 50 mm nominal outer dia Pipes |
| 50 | Providing and fixingPolyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction ofEngineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (Finolex or equivalent make) |
| 51 | 50 mm pvc pipe |
| 52 | 75 mm pvc pipe |
| 53 | 110 mm pvc pipe |
| 54 | 160 mm pvc pipe |
| 55 | Part - B (Type-II -Electrical )Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 56 | Group A |
| 57 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 58 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 59 | b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 60 | c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 61 | d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 62 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 63 | 20 mm |
| 64 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 65 | 5/6 A switch |
| 66 | 15/16 A switch |
| 67 | 3 pin 5/6 A socket outlet |
| 68 | 6 pin 15/16 A socket outlet |
| 69 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 70 | 1 or 2 Module (75 mmX75 mm) |
| 71 | 6 Module (200 mmX75 mm) |
| 72 | Supplying and fixing brass batten/ angle holder including connections etc. as required. |
| 73 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 74 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 75 | 12 way, Double door |
| 76 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 77 | Single pole |
| 78 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 79 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 80 | 40 A |
| 81 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 82 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 83 | Labour charges for removing the old PDB,LDB,FDB,existing Tube Light fittings and old switch box, MS conduit pipe wiring from ceiling and wall and handover to electrical maintenance department etc., as required. |
| 84 | Supplying and fixing of surface mountedFitting andTube 20w (2 Nos) ,One feet down rod (2nos) and other accessories Complete with connections,testing and commissioing as required.removing the old fitting and handingover the same to Engg In Charge. |
| 85 | Mirror light.Supply, Installation, testing and commissioning of prewired LED 2 feet (10 watts)or Equivalent as approved by the department, directly on ceiling/wall, complete with all accessories including connection etc.,after removing the existing fittings and handing over the same as directed by the Engineer-In-Charge as required. |
| 86 | (Part - C (Type V-Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth within CSIR-SERC/TTRS Campus leadas per the direction of Engineer-in charge. All kinds of soil |
| 87 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within CSIR-SERC/TTRS Campus lead as per the direction of Engineer-in charge. |
| 88 | Dismantling 15 to 110 mm diaPVCpipe lines including stacking of dismantled pipes with in CSIR-SERC/TTRS campus lead as per direction of Engineer -in-charge concealed/exposed on wall |
| 89 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within CSIR-SERC/TTRS Campus leadas per the direction of Engineer-in charge : Of area 3 sq. metres and below |
| 90 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba within CSIR-SERC//TTRS Campus leadas per the direction of Engineer-in charge. |
| 91 | Dismantling tile work in floors and Walllaid in cement mortar including stacking material within CSIR-SERC/TTRS Campus leadas per the direction of Engineer-in charge. For thickness of tiles 10 mm to 25 mm |
| 92 | Providing and fixing Ist quality ceramic glazed wall tiles size 300x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make - Johnson, Somany, Kajaria or equivalent) |
| 93 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm (Make - Johnson, Somany, Kajaria or equivalent) |
| 94 | Providing and laying Ceramic antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(Make - Johnson, Somany, Kajaria or equivalent) |
| 95 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of colour black, cherry / Ruby red of area less than 0.50 sqm. |
| 96 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and coloure:Two or more coats on old work. (Make : Asian, Berger or equilvalent) |
| 97 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. (Make : Asian, Berger or equilvalent) |
| 98 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/ litre, of approved manufacturer and of required shade and colour all complete to acheive even shade and colour:Old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gm/litre. (Make : Asian, Berger or equilvalent) |
| 99 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work. (Make : Asian, Berger or equilvalent) |
| 100 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. (Make : Asian, Berger or equilvalent) |
| 101 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth . Granite Stone of approved shade |
| 102 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge |
| 103 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three [email protected] litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thicknessof complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 104 | Fixed UPVCwindow / ventilator with mullion / transom. Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) (Make : Fenestaor equilvalent) |
| 105 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, /c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.).(Make : Jindal, Sail or equilvalent) |
| 106 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm. (Make : Godrej, Dorma or equilvalent) |
| 107 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%etc., all as per direction of Engineer-in-charge. |
| 108 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron usingchemical emulsion @ 2.25 litres per linear metre includingdrilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration etc., all as per direction of Engineer-in-charge. |
| 109 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand with water proofing chemical) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1%concentration etc., all as per direction of Engineer-in-charge. |
| 110 | Treatment at points of contact of wood work by chemical emulsionChlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.(The rate is inclusive of spraying the wind tunnel in the lab area) etc., all as per direction of Engineer-in-charge. |
| 111 | New Sanitary fiitings |
| 112 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (Make-parryware or equivalent)W.C. pan with ISI marked white solid plastic seat and lid |
| 113 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Make-parryware or equivalent) |
| 114 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 115 | Providing and fixing CP brass sink cockof approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore (Make: metro delux or equivalent) |
| 116 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510 x 1040 mm bowl depth 250 mm(Make: Hindware or equivalent) |
| 117 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms(Make: metro delux or equivalent) |
| 118 | Providing and fixingStainless steel Hand shower (Health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook of product hookas directed by Engineer-in-charge, cutting and making good the walls. |
| 119 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore (Make: metro delux or equivalent) |
| 120 | Providing and fixingtwo way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal borewith wall flange as directed by Engineer-in-charge, cutting and making good the walls. (Make: metro delux or equivalent) |
| 121 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. (Make: metro delux or equivalent) |
| 122 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length (Make: Finolex or equivalent) |
| 123 | Providing and fixingapproved colour/shade of connection hose hot & Cold water as directed by Engineer-in-charge, cutting and making good the walls. |
| 124 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colourand making good the walls. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (Make: metro delux or equivalent) |
| 125 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 126 | Constructing masonry Chamber 75x75x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 127 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. a) 15 mm nominal dia (Make: metro delux or equivalent) |
| 128 | Providing and fixing C.P. brass shower rod with 15 or 20 mm inlet : 150 mm diameter (Make: metro delux or equivalent) |
| 129 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (Make: metro delux or equivalent) |
| 130 | Providing and fixing approved colour / shade of PVC floor Trap as directed by Engineer- in-charge, cutting and making good the walls (Make: Finolex or equivalent) |
| 131 | Providing and fixing CP Brass 32mm sizebrass Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(metro super deluxe or equvalent make) |
| 132 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (Make: metro delux or equivalent) |
| 133 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Make: metro delux or equivalent) |
| 134 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms |
| 135 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (Make: Leader or equivalent) |
| 136 | 25 mm nominal bore |
| 137 | 50 mm nominal bore |
| 138 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Ashirvaad or equivalent make) |
| 139 | 25 mm nominal outer dia Pipes |
| 140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Ashirvaad or equivalent make) |
| 141 | 50 mm nominal outer dia Pipes |
| 142 | Providing and fixingPolyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction ofEngineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (Finolex or equivalent make) |
| 143 | 50 mm pvc pipe |
| 144 | 75 mm pvc pipe |
| 145 | 110 mm pvc pipe |
| 146 | 160 mm pvc pipe |
| 147 | Part - D (Type-V -Electrical )Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 148 | Group A |
| 149 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 150 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 151 | b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 152 | c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 153 | d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 154 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 155 | 20 mm |
| 156 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 157 | 5/6 A switch |
| 158 | 15/16 A switch |
| 159 | 3 pin 5/6 A socket outlet |
| 160 | 6 pin 15/16 A socket outlet |
| 161 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 162 | 1 or 2 Module (75 mmX75 mm) |
| 163 | 6 Module (200 mmX75 mm) |
| 164 | Supplying and fixing brass batten/ angle holder including connections etc. as required. |
| 165 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 166 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB\"s (but without MCB\"s and incomer ) . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 167 | a) 8 way (4 + 24), Double door |
| 168 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 169 | Single pole |
| 170 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 171 | Supplying and fixing following rating, fourpole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 172 | 40 A |
| 173 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 174 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 175 | Labour charges for removing the old PDB,LDB,FDB,existing Tube Light fittings and old switch box, MS conduit pipe wiring from ceiling and wall and handover to electrical maintenance department etc., as required. |
| 176 | Supplying and fixing of surface mountedFitting andTube 20w (2 Nos) ,One feet down rod (2nos) and other accessories Complete with connections,testing and commissioing as required.removing the old fitting and handingover the same to Engg In Charge. |
| 177 | Mirror light.Supply, Installation, testing and commissioning of prewired LED 2 feet (10 watts)or Equivalent as approved by the department, directly on ceiling/wall, complete with all accessories including connection etc.,after removing the existing fittings and handing over the same as directed by the Engineer-In-Charge as required. |
