|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 3 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 4 | Light shade pigment using white cement |
| 5 | Neat cement punning. |
| 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. |
| 7 | Old work (one or more coats) |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 10 | One or more coats on old work |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 12 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 14 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 16 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 17 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 19 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 21 | W.C. pan with ISI marked white solid plastic seat and lid |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 23 | Semi rigid pipe 32 mm dia |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 25 | 25 mm nominal dia Pipes |
| 26 | 40 mm nominal dia Pipes |
| 27 | 50 mm nominal dia Pipes |
| 28 | 80 mm nominal dia Pipes |
| 29 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 30 | 40 mm dia nominal bore |
| 31 | 50 mm dia nominal bore |
| 32 | 80 mm dia nominal bore |
| 33 | Providing and fixing brass bib cock of approved quality : |
| 34 | 15 mm nominal bore |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 36 | 40 mm nominal bore |
| 37 | 50 mm nominal bore |
| 38 | 80 mm nominal bore |
| 39 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : |
| 40 | 40 mm nominal boreHorizontal |
| 41 | 80 mm nominal bore Vertical |
| 42 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 43 | 40 mm nominal bore |
| 44 | 50 mm nominal bore |
| 45 | 80 mm nominal bore |
| 46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 47 | 15mm nominal bore |
| 48 | Providing and fixing PTMT grating of approved quality and colour. |
| 49 | Circular type100 mm nominal dia |
| 50 | Painting with floor paint of approved brand and manufacture to get an even shade: |
| 51 | Providing and fixing brass foot valve of approved quality |
| 52 | 50 mm nominal bore |
| 53 | Providing and fixing CPVC Ball Valve with PVC lever of approved quality. |
| 54 | 25 mm dia |
| 55 | 40 mm dia |
| 56 | 50 mm dia |
| 57 | 80 mm dia |
| 58 | Providing and fixing CPVC Union Socket of approved quality. |
| 59 | 25 mm dia |
| 60 | 40 mm dia |
| 61 | 50 mm dia |
| 62 | 80 mm dia |
| 63 | Providing and fixing C.P Pillar cock of approved quality : |
| 64 | 15mm nominal bore |
| 65 | Providing and fixing soil, waste and vent pipes : with UPVC pipe coforming to IS:13592 type B including jointing with seal ring conforming to IS:5382 living 10mm gap for thermal expansion (i) single socketed pipes |
| 66 | 110 mm dia |
| 67 | 75 mm dia |
| 68 | Providing and fixing UPVC moulded door bend of required degree for UPVC soil pipes conforming to IS:13592 type \"B\" including jointing with seal ring conforming to IS:5382 living 10mm gap for thermal expansion |
| 69 | 110 mm dia |
| 70 | 75 mm dia |
| 71 | Providing and fixing UPVC moulded plain bend of required degree for UPVC soil pipes conforming to IS:13592 type \"B\" including jointing with seal ring conforming to IS:5382 living 10mm gap for thermal expansion |
| 72 | 110 mm dia |
| 73 | 75 mm dia |
