|
| 1 | PART-A (Bldg.) |
| 2 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. (B/12.37.1) |
| 3 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work (B/12.43.1) |
| 4 | Applying priming coat with ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. (B/12.45.1) |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.One or more coats on old work. (B/12.46.2) |
| 6 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) (B/12.22.2) |
| 7 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm (B/13.4.1) |
| 8 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand). (B/13.1) |
| 9 | Refixing old glass panes with putty and nails (B/13.9) |
| 10 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete(B/13.23) |
| 11 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc.(B/13.24) |
| 12 | P&F Indian type white glazed vitreous china Ist quality WC Orissa pan (IS : 2556 mark) with 100mm vitreous china P or S trap incld. Cutting & making good the wall and floor size 580x440mm.(S/1.2.2) |
| 13 | P&F Ist quality WVC Urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe dome waste couplings, concealed iron brackets or screws etc complete. Flat back (small) size 456 x 355x 265 mm. (S/1.14.1) |
| 14 | P&F WVC wash basin (Ist quality, IS: 2556 mark) of approved make with CI brackets duly painted, 1No. 15mm CP Pillar cock (IS:8934 mark) and 32mm CP brass waste coupling of approved make, PVC waste pipe with pvc nut 32m complete including cutting & making good the wall : size 550x400 mm.(S/1.36.3) |
| 15 | P & F Towel Rall or Ring of approved quality/make.C.P. brass Towel Rail with brackets 600x20mm. (S/1.47.4) |
| 16 | P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.) of approved make with cover, 25mm dia 1M long G.I. over flow Pipe & 25 cm. long wash out Pipe with plug & socket, Including making connection etc. complete of approved design : 500 litre capacity. (S/2.26.3) |
| 17 | P & F looking Mirrors with P.V.C. frame of approved make as per direction of engineer in charge .Size 500 x 400 mm. (S/1.47.1) |
| 18 | Providng and fixing Chlorinated Polyvinyl chloride (CPVC) (IS 15778:2007 code) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. (Internal work exposed on wall) (A) 15 mm. nominal size (S/2.37.1) |
| 19 | (B) 25mm Nominal size (S/2.37.3) |
| 20 | Providng and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, (IS 15778:2007 code)having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in charge. (External work) (A) 15 mm. nominal size(S/2.39.1) |
| 21 | (B) 25mm Nominal outer dia pipes (S/2.39.3) |
| 22 | P&F bib cock (IS : 8931 mark), Superior quality of approved make: (A) CP Brass bib cock 15mm nominal bore.(S/2.7.3) |
| 23 | (B) Brass 400gm, 15mm nominal bore.(S/2.7.1) |
| 24 | P&F ball cock (IS : 1703 mark) with rod & PVC ball complete :Brass wt. Not less than 300gm 15mm. (S/2.11.1) |
| 25 | P&F Full-way wall valve (IS : 778 mark) or wheel valve of approved make: (A) Gun-metal 15mm nomimal bore.(S/2.15.1) |
| 26 | (B) Gun-metal 25mm nomimal bore.(S/2.15.3) |
| 27 | P&F SC floor trap (Nahni) of (IS : 1729 mark) of appd. Quality / make with socket down or hinged grating incld. Cutting and making good the floor : size 100x100 mm (S/3.12.1) |
| 28 | P&F Flush Cock/ Flush valve (IS:9758 Mark) for WC of approved quality make: Brass/ Gun metal Half-turn wt. 1Kg of approved quality/ make. 25mm nomimal bore.(S/2.14.9) |
| 29 | P&F Inlet connection (Angle Valves) Superior quality, of approved make for wash basin, Gyser etc. CP Inlet connection 15mm brass (IS:8931 mark).(S/2.12.1) |
| 30 | P&F 15mm dia. Connection pipe of approved quality/make: PVC pipe with CP brass nuts upto lenth 300mm. (S/2.13.1) |
| 31 | P&F rigid PVC pipe (IS:4985 mark) class-II (4kg/Cm2) approved quality/ make including jointing the pipe with solvent cement rubber ring and lubricant. (A) 75 mm dia (S/3.16.2) |
| 32 | (B) 110mm dia (S/3.16.3) |
| 33 | P&F rigid PVC pipe fitting (IS:4985 mark) of approved quality/ make including jointing the fitting with solvent cement rubber ring and lubricant : (A) Bend 45˚. 110mm dia. (S/3.17.8.ii) |
| 34 | (B) Bend 87.5˚. 110mm dia. (S/3.17.9.ii) |
| 35 | (C ) Vent Cowel. 110mm dia. (S/3.17.12.ii) |
| 36 | (D) Coupler (Socket). 110 mm dia. (S/3.17.1.ii) |
| 37 | (E) Plain Tee. 110 mm dia. (S/3.17.3.ii) |
| 38 | (F) Pipe Clip. 110 mm dia. (S/3.17.15.ii) |
| 39 | Supply & Fixing G.I. Union ISI marked in G.I pipes line as required complete in all respect of size . (A)15 mm dia nominal bore. (S/2.32.1) |
| 40 | (B)25 mm dia nominal bore. (S/2.32.3) |
| 41 | P & F European type white glazed vitreous china 1st quality W.C. pan ( IS : 2556 mark) with P or S trap including cutting and making good the wall and floor(.S-/1.3 ) |
| 42 | P & F water closet seat covers with brass hinges complete : Solid PVC ( ISI marked) grade – I white for EWC.(S-1.7.2) |
| 43 | P&F low level flushing cistern of 10 liters capacity is 2556 mark or approved make with complete fittings ci brackets duly painted brass ball cock with ball is 1703 mark ) complete including cutting and making good the wall. PVC with pvc bend and superior internal fittings as per IS 7231(s-1.20.3) |
| 44 | P&F jet spray for water closet with c,p. copper tube flange of approved make.(S-1.59) |
| 45 | P &F 1st quality standard white,grey, Ivory, fume red brown, light green, light blue & other light shades glazed Tiles confirming to (IS: 13753 & IS : 15622) of size 200mm x 300mm in walls, floors, steps, pillors etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the match the shade of tile complete (excluding the cost of cement plaster on walls & pillar). (B/7.12) |
| 46 | P &F 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 & IS : 15622 such as White, grey, ivory, fume red brown, light green, light blue & other light shades in floors, steps etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment match the shade of the tile complete (including the cost of cement mortar bed 1:4). (B/7.13) |
| 47 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR.(A) Short point .(upto 3 mtr.) (E/1.1.1) |
| 48 | (B) Medium point (upo 6 mtr.) (E/1.1.2) |
| 49 | (C) Long point. (upto 10 mtr.) (E/1.1.3) |
| 50 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR- ON Board (E/1.3.1) |
| 51 | Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR (E/7.36) |
| 52 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 20mm (E/1.4.1) |
| 53 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR(A) 2 x 2.5 sq. mm. + 1x1.5sqmm. (E/4.1.7) |
| 54 | (B) 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (E/4.1.14) |
| 55 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Single pole MCB (With B/C curve tripping characteristics) 6A to 32A rating (E/6.1.1.2) |
| 56 | Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Double Pole Isolator 63A rating. (E/6.2.1.2)) |
| 57 | Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR. Suitable for Six / Eight module for MCB/ RCCB (E/6.9.2) |
| 58 | Providing & Fixing of ISI marked (IS:371) 6 amp surface type 3 pin ceiling rose with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .(E/7.12) |
| 59 | Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .(E/7.13) |
| 60 | Providing & Fixing of single / multi tone electronic call bell as per PWD specification for electrical Works, including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR(E/7.25) |
| 61 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) (E/15.7.3) |
| 62 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm (E/17.1.1) |
| 63 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins onhousing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85%,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrswith Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR.LED Street Light fixture with Minimum lumen output 2450 lm. (E/18.12.1) |
| 64 | Providing & Fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .(E/7.10) |
| 65 | Providing & Fixing of 3/6 pin 16 amp flush type non modular socket made out from Industrial grade Polycarbonate or fire resistant ABS material, brass terminal with Porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .(E/7.11) |
| 66 | Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 120 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .(E/7.20) |
| 67 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils. (B/1.8) |
| 68 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. :1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (B/3.1.6) |
| 69 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). (B/6.1.6) |
| 70 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand). (B/5.2.2) |
| 71 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) (B/5.8.3) |
| 72 | Add extra for Square or Rectangular Pillars in superstructre flyash Brick work upto three storey : (A) Upto 45 cm length and two corners are free. (B/5.3.2) |
| 73 | P&L in position CC including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work upto plinth level: 1:2:4 M15 grade nominal mix (1cement: 2coarse sand: 4graded stone aggregate 20mm nominal size). (B/3.1.2) |
| 74 | Brick masonry with F.P.S. bricks of class designation 75 infoundation and plinth with bricks. cement mortar1:6 (1 cement : 6 coarse sand). (B/5.1.2) |
| 75 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : (A) Window side hung / ventilator top or center hung. (B/9.19.3) |
| 76 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. (B/9.27) |
| 77 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. (B/9.26) |
| 78 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint Add extra for double leaf shutters. (B/9.17+9.17.1) |
| 79 | S&F in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges : (A) Kota stone minimum 30mm thick. (B/6.17.3) |
| 80 | (B) Sand or other approved stone 50 mm thick. (B/6.17.2) |
| 81 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. (B/11.3.2) |
| 82 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification. (B/3.8) |
| 83 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins onhousing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85%,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrswith Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR. LED Street light fixture with minimum lumen output 11225 lm.(E/18.12.6) |
| 84 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm. (B/11.19.2) |
| 85 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure \"A\" 30mm thick, commercial veneer both side. (B/8.13.2.1) |
| 86 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. (B/8.14) |
| 87 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished. (A) 20mm thick. (B/12.3.2) |
| 88 | (B) 12mm thick. (B/12.3.3) |
| 89 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (B/1.31) |
| 90 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix (B/4.1) |
| 91 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix (B/4.3) |
| 92 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. (B/4.9) |
| 93 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. (B/4.10.2) |
| 94 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Cold twisted deformed bars (IS:1786). (B/4.13.2) |
| 95 | PART- B (Item Rate Basis) |
| 96 | Supply,stacking and spreading of graded crusher brocken hard stane aggregate fee from organic matter including stacking & spreading in yard/trenches as per the standard specification of size 40mm to 63 mm including all lead & lift, transportation, labour,loading ,unloading & T&P required for graveling work as per direction if Engineer incharge incl.dressing & leveling. |
| 97 | Earthwork in filling of excavated earth except back cotton Soil With watering, and Compaction of Spreaded earth in 15-30 cm layers , levelled and neatly dressed as Per requirement of site and direction of engineer in charge, work includes cost of earth with taxes, loading, unloading, transporation,labour, water and T&P etc. Complete with all lead and lift. |
| 98 | Collection, transportation(all lead) & spreading (including hand ramming) of crusher dust including stacking as the standard specification in layers not exceeding 15 cm (loose) incld. dressing etc complete.For all lead and lift complete as per direction of engineer incharge including compaction by plate vibrator complete. |
| 99 | Supply, stacking, spreading & hand ramming of quarry rubbish in layer not exceeding 15 cm (loose) incl. all lead & lift, transportation, loading, unloading with water & hand ranning with labour incl. T&P, machinery, water etc.complete in all respect finishing in lying,level and camber as per direction of Engineer in charges. |
| 100 | Stacking of laid crusher broken ballast in yard as per specification & relaying of line same in the eased yard in layers not exceeding 15cm (loose) as per specification including dressing etc. complete for all lead and lift complete as per direction of engineer in charge. |
| 101 | Dismantling of interlocking blocks of 60-100 mm thick and stacking of serviceable tiles away from site including all lead labour T&P complete in all respect. |
| 102 | Refixing of stacked old serviceable interlocking blocks of 60-100mm thick on 50mm thick (av.) bed of coarese sand the joints is to be filled with fine sand including all labour T&P complete in all respect. |
| 103 | Cleaning of existing septic tank of standard size and disposal of sludge away from campus complete in all respect labour, T&P as per direction of engineer in charge. |
| 104 | Cleaning of existing manholes and disposal of sludge away from campus complete in all respect labour, T&P as per direction of engineer in charge. Please Enable Macros to View BoQ information |
