|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | CEMENT PLASTER (IN COARSE SAND)12 mm cement plaster of mix : |
| 6 | 1:6 (1 cement: 6 coarse sand) |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 9 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 11 | Hot finished welded type tubes |
| 12 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge |
| 13 | 10 x 120 mm |
| 14 | Providing & fixing multiwall multicell polycarbonate sheet roofing up to any pitch, including complete assembly of extruded cellular structure. Panel shall be fixed on purlins with SS Fastener and snap on connectors (excluding the cost of purlins, rafters, trusses etc). Panel shall be co-extruded and UV protected. Panel shall be secured with snap on polycarbonate connectors to interlock the panels have double tooth locking with conitinous connectors mechanism along with standing seam to ensure maximum uplift capability with Aluminium Cleat and End Cap, complete to make a water tight skylight system. Panel must satisfy dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min of 500 Hours as per ASTMG 155.Make: Coxwell/Danpal/Sunlite/Lexan |
| 15 | 10mm thick |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 17 | Two or more coats on new work |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black,Cherry/Ruby red |
| 19 | Area of slab upto 0.50 sqm |
