|
| 1 | Demolition of floor hearth or wall tilinglaid bedded and pointed in any mortar (but not backing) complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise specifically provided etc (below or above ground level)as in roof pad /floors etc and removing debris off the site complete all as spcified and as directed. |
| 3 | Dismantling MS steel work of any descrption as in fencing post,MS line wire ,Gate etc complete all as specified and as directed |
| 4 | Dismantling boarding/partition , any description, fixed in any position with screws all as specified and directed |
| 5 | Dismantling ceiling boards any description , any thickness, including cover fillets complete all as spcified and as directed. |
| 6 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 7 | Taking down chowkats or frames including shutters (without taking off shutters from the frames)exceeding 1.50 Sqm and not exceeding 4 Sqm each,complete all as specified and directed. |
| 8 | Material and labour for UPVC door with shutters .The construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reiforced with galvanised steel profileof wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed to door frame with UPVC standared beading s of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be provided with UPVC board 5mm thick & 1Mtr in height andthe balance shall be glazed excluding the shutter frame area.The shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall beprovided with 5mm thick sheet glass & 5mm UPVC board with EPDM rubber gasket,multi point lockingwith powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deemed with the quoted rate. Make : Madhu Industries / AMD overseas Ltd/ Fanesta/Sarvesh multiplast Pvt India Ltd |
| 9 | Supply and fixing factory made UPVC white colour Three track three panels sliding window/partition with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,incl Glazing shall be provided with 5 mm thick Plain / frosted glassfixed with appropriate size beading as per manufacurer\"s specificationsandStainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter, complete all as specified and directed. Make: Madhu Industries / AMD overseas Ltd/ Fenesta/ Aluplast.Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 10 | S & F blinds of approved make roller type,Zebra pattern using polyester/PVC/vinly of approved colour/shade and pattern including operating arrangements such as chord/thread,counter weight,connecting chain etc and necessary fittings complete all as specified and as directed. Make : Vista/Levolor/Aerolux/MAC |
| 11 | Supply and fix UPVCPartition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etcall as specifed and directed.Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design) |
| 12 | S & F PVC sheet wall panelling of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a groove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. Make : Rajashri or equivalent |
| 13 | S & FPVC false ceilingconsisting of 600mm x 600mm, 5mm (±0.25) thick Prelam embossedPVC sheetof density 600 Kg /Cum Manufacturedby an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1” x1”( 25x25mm, 19 gauge or 1mm thick )insquare pattern of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is supported from the ceiling with the help of \"J\" hook and G.I. wire / 6mm M.S. rods of required sizes tomaintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1( 25x25mm ) angles etc.as per manufacturer’s specification & drawing completeall as directed.Make : Rajashri or equivalent |
| 14 | M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top finishas in sub base of floor etc all as directed |
| 15 | M&L Providing25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and fair to receive the floor finish completeall as directed. |
| 16 | M & L for vitrifiedjointless tiles 8-10 mm thick light colour (square/ rectangular) area of each tile exceeding 0.42 sqmbut not exceeding 1.00 sqm,as in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including 20mm thick screed bed in CM 1:4 complete all as spcified and as directed. |
| 17 | Material and labour for rendering in cement Mortar ( 1:6) 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.. |
| 18 | M&L for preparation of newplastered surfaces of walls applying two coats of distemper, oil emulsion including alkali resistant primer over 1mm thick wall care putty complete all as specified and directed. |
| 19 | M&L forGranite 18-20mm(any patern) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) 15 mm thickness of mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spcified and as directed. |
| 20 | S&F Workstation of size 1200W*600DProviding and placing WISH - FINS AT END AND INTERMEDIATE based modular workstation, with partition thickness as 52.4 mm thk and ht -1200 including powder coated aluminium trims.FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish.Tiles on main spine: Top tiles are fabric magneitc tile+White writing board. Bottom tiles - Plain metal .INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL+DL finish.Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Legs - Metal Leg with powder coatingWorksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front with Cam lock, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file.CPU ( Central processing unit ) trolley - with castorsKBPT ( Key board plastic tray ) with mousetray - MetalMake:Godrej/Nilkamal/Durian |
| 21 | Gain pro storage -Dimension - 1950 H x 900 W x 450 DProduct Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W. Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing HingeHandle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision.- Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing.Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels. Number of files that can be stored in one shelf is as follows:900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).Metal body and Metal doorMake:Godrej/Nilkamal/Durian |
| 22 | S & F overhead Storage ofdimension - 900W*328D*785HMetal Body and Metal door Product Size - The ASCEND consist of main and Add-On unit type of construction with metal body and metal/wooden door option. ASCEND is availble in following sizes 300(Wmm/450(W/mm/600(W/mm/900(W)mm X 328**(D)mm X 785(H)mm. Depth includes door thickness. Body depth is 308mm. Stackability - Any width of add-on units can be stacked with any width of main unit and penta unit. Installation - The ASCEND should be installed on concrete or solid brick wall only. Construction & Material - Aesthetically appealing complete knock-down construction made from 0.5mm(#0.07 mm)THK CRCA as per IS 513 for back panel, side panel, side end cover panel, top panel, bottom panel & bottom panel cover. Doors - Wooden doors are made from 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS 12823:1990, Edge banded with matching 2 mm thick PVC lipping. 300W. 450W & PENTA units have single RH door with lock. 600W, 900W units have LH door & RH door with single lock on RH door. Soft closing Hinges Available with 105° door opening angle Handleless. Doors. Locking - Cam lock with lock lever at the bottom of the door. Shelving - Fixed shelves made up of 10 bend panel made of 0.6mm (for 300mm and 450mm Width land 0.8mm (for 600mm and 900mm width) Thick CRCA (D Grade, IS-513). A4 SIZE BOX FILES(85W×345Hx285D) can be stored vertically.Number of files that can be stored on each shelf is For width 300w - 3 Nos.Each shelf has max Load Capacity of 11.5kg of UDL for 300W unit. Finish - Epoxy powder coated to the thickness of 50 microns(+10)Make:Godrej/Nilkamal/Durian |
| 23 | Supply and fix18mm thick High Density High Moisture Resistant/ High Density High waterResistant(HDHMR/HDHWR/HDWR ) Board,both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with samelaminated sheet to match with the other surfaces and nothing will be paid extra.Make : Century/Action Tesa or equivalent. |
| 24 | Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 25 | Supply and fixGun metal handle ofsize150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 26 | Supply and fixlock for cupboard/wardrobe with two keys and key hole cover (silver,painted finish) fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 27 | M&L for Complete removal of existing treament from old plastered or unplastered surfaces of wallsand applying two coats of Oil bond distemper, white or tinted over one coat of alkali resistant primercomplete all as specified and directed. |
| 28 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc..complete all as spcified and as directed. |
| 29 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as spcified and as directed. |
| 30 | Disconnecting/dismantling of old existing un serviceable DB\"s any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB\"s etc. complete all as specified and directed |
| 31 | M&L forpoint wiring complete with1.5 Sq mmsingle core PVC insulated FRLSunsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way |
| 32 | All as per Item No 31 herein before but 3 pin socket out let 6 Amps on independent board |
| 33 | M&L for point wiring complete all all as specified with 1100 Volts grade 2.5 sqmm single core PVC insulated FRLS 1000 Volts gradewith multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board |
| 34 | Supply & FixingModular type switch 6 Amp one Module, one way complete all as specified and as directed. |
| 35 | Supply & Fixing Modular type shuttered socket outlet , 2/3 Pin, 6 Amp, 230 Volts two modules with ISI mark complete all as specified and as directed. |
| 36 | Supply & FixngModular typeswitc 16 Amps one module,oneway,complete all as specified and as directed. |
| 37 | Supply & FixngModular type shuttered socket outlet,2/3 Pin, 6/16 Amp,230 volts, Two modules with ISI marked complete all as specified and as directed. |
| 38 | Supply & Fixng Modular type Bell Push switch, 6 Amps , one module , one way complete all as specified and as directed. |
| 39 | Supply & fixing ceiling rose , surface backlite type 65 x 50 mm , 2 to 3 terminal with ISI Mark all as specified and as directed |
| 40 | Supply & Fixing Buzzer Dingdong AC, 230 Volt single pole complete all as specified and as directed. |
| 41 | S & F internet socket RJ-45, suitable for CAT 6 cable, shielded, folded metal 1 module complete all as specified and as directed. Cat. No. ACVKJWW451Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of Schneider |
| 42 | S & F TV coaxial socket,1 modulecomplete all as specified and as directed. Cat No.-ACVKTOW001 Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of Schneider |
| 43 | Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performanceelectronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS20W LED865SP CSSIND OUG G |
| 44 | S&F, IP >= 20, Class I, recess mounting LED square shape slim ceiling light fitting 42 W or next higher rating, CRI >= 80, CT >= 5700 K, suitable for 600 x 600 mm (approx dimensions) suitable for modular Grid/Armstrong ceilings, integrated type, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed incl taking down old/unsv fittings MAKE:- Cat No : PLANO2X2PLR42WLED857SG2 of make Havells or techno-commercially equiv In Jaguar/Philips |
| 45 | S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE2TZ1I060, Model - Florentineor techno-commercially equivalent in Philips/Jaguar |
| 46 | Supply and fixing LED Rojo lamps of rating 7W, red lamp with B-22 base cap all as directedMake : Havells,Cat No.-LHLDBWEB4P8R007(RED LAMP) or techno-commercially equivalent in Philips/Jaguar |
| 47 | Supply and fixing LED Rojo lamps of rating 7W, green with B-22 base cap all as directed Make : Havells,Cat No.-LHLDBWEB4O8R007(GREEN LAMP) or techno-commercially equivalent in Philips/Jaguar |
| 48 | Supply and fixing of sub main wiring 1100 Volts grade multistranded copper conductors two runs of single core 6 Sqmm along with 6 sqmm pvc insulated one run single core multistranded copper conductor cable as earth contniuity conductor run along with suitable size ofPVC conduit all as specified and as directed. |
| 49 | Supply and fixing of sub main wiring 1100 Volts grade multistranded copper conductors two runs of single core 4 Sqmm along with 4 sqmm pvc insulated one run single core multistranded copper conductor cable as earth contniuity conductor run along with suitable size of PVC conduit all as specified and as directed. |
| 50 | S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed |
| 51 | S&F Miniature circuit Breakers, SPN,of capacity 32 Amps C-Series 240 Voltswith breaking capacity 10 KA all as spcified and as directed. |
| 52 | S&F Miniature circuit Breakers,capacity (6-32 Amps) single pole,C-Series 240 Voltsas ordered with breaking capacity 10 KA. |
| 53 | Labour only for Removing and Refixing of serviceable LED decorative/Hanging Lightfitting incl connecting Accessories incl proper cleaning and making electrical connections complete all as directed |
| 54 | S & F rigid non-metallic PVC conduits of external dia25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends with aluminium clamp, bolt, nuts etc for fixing complete all as specified and directed. |
