|
| 1 | CSR :ACivilworksEarth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m |
| 2 | CSR :ACivilworksProviding and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm and down size graded crushed coarse aggregates. |
| 3 | CSR :ACivilworksProviding and laying in position Cement Concrete for all Foundation works below plinth beam. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix laid in finished layers, well compacted using needle vibrators, including all lead & lifts, including providing fixing and removing shuttering, scaffolding, staging etc, including cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm and down size gradedcrushed coarse aggregates. Note: Quoted rate shall include all the cost of shuttering, scaffolding, staging etc, and no seperate payment shall be made for the same. |
| 4 | CSR :ACivilworksProviding and laying in position Cement Concrete for all Plinth beam works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix laid in finished layers, well compacted using needle vibrators, including all lead & lifts, including providing fixing and removing shuttering, scaffolding, staging etc, cost of all materials, quality confirming to the requirements ofrelevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm and down size gradedcrushed coarse aggregates.Note: Quoted rate shall include all the cost of shuttering, scaffolding, staging etc, and no seperate payment shall be made for the same |
| 5 | CSR :ACivilworksProviding and laying in position Cement Concrete for all Super structures of building, road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates. Note : Quoted rate shall include all the cost of shuttering, scaffolding, staging etc and no seperate payment shall be made for the same. |
| 6 | CSR :AcivilworksSupplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification |
| 7 | CSR :ACivilworksFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming andwateringas directed by Engineer-In-charge. |
| 8 | CSR :ACivilworksFilling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and as directed by Engineer-In-charge. |
| 9 | CSR :ACivilworksProviding and laying65 to 100mm size granite soling stones of approved quality & size for flooring base including preparation of base properly by leveling dressing & hand ramming using hand rammer with watering, providing & filling interstices using small sized stones / chips, providing & spreading binding materials such as murrum / gravel with proper watering, collecting & disposing the generated waste,from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing and as directed by Engineer-in-charge at all locations & lifts. |
| 10 | CSR :ACivilworksProviding and laying factory made Precast concrete solid blocks of grade M10constructed with CM 1:6 as per IS 2572:2005,including cost of all materials, labour, scaffolding and usage charges of machineries & other incidental charges complete as per the direction of engineer incharge of work. |
| 11 | CSR :ACivilworks Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. |
| 12 | CSR :ACivilworksProviding 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 13 | CSR :ACivilworksProviding 15 mm cement plaster on the rough side of single or half brick wall of mix :1:5 (1 cement: 5 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 14 | CSR :ACivilworksProviding 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:4 (1 cement : 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 15 | CSR :ACivilworksProviding and fixing Single Rebate Door Frames made out of 110 X 65 mm hollow metal pressed steel section of 1.66 mm thick,galvanized as per BIS 277 of the latest edition with Zinc @ 120 gm. per Sqm., of approved make including preparation of base, providing & fixing four numbers of heavy duty MS Oxidised Hinges of 125 mm long, three numbers of hold fastes of MS Flats 25 mm X 3 mm X 300 mm long on each side of frame or three numbers of 10 mm dia suitable length anchor fasteners by the side of column [wherever required / as directed], making provision for fixing required hardware fixturers, door closers & fittings, filling the hallow section & embedding the holdfasts using PCC 1:3:6 [using 20 mm down graded stone aggregates with curing], providing & applying metal putty [wherever required], Providing & painting with One Coat of Red oxide Primer / Zinc phosaphate Primer & Two Coats Ist Quality Synthetic Enamel Paint [of asian / beger make, of approved shade / colour] on the all faces of frame, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, manufacturers technical specification and as directed by Engineer-in-charge at all locations & lifts / heights.[All material shall be of superior 1st quality,standard make and confirming to relavent BIS/ASTM standard specification of latest edition.colour /shade shall be as selected by Engineer-in-charge & as per site requirement.] |
| 16 | CSR :ACivilworks Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.with both side prelam |
| 17 | CSR :ACivilworksProviding and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 18 | CSR :ACivilworksPainting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 19 | CSR :ACivilworksProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage Charges of machinery complete as per specifications. |
| 20 | CSR :ACivilworksProviding & fixingglass panes with glazing clips in steel/alluminum doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Tinted) |
| 21 | CSR :ACivilworksProviding and laying vitrified floor tiles of size 600mm x600mm with thickness 9-10 mm insize with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Basic rate of tiles shall not be less than Rs.500/- per Sqm(Including GST) |
| 22 | CSR :ACivilworksProviding skirting, dadooing, riser of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approvedmake and size including cost of materials, labour, complete as per specifications. |
| 23 | CSR :ACivilworksProviding and laying Polished Granite stone flooring in required design and patterns, in linear as well ascurvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. |
| 24 | CSR :AcivilworksProviding edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer-in-charge. |
| 25 | CSR :ACivilworksEmbossing / Engraving the title of the project in Kannada Script and“NPCIL LOGO \" of standard size & shape [to suit structure] on the external plastered surface of the building by using CM 1:3 and painting the same over a Coat of exterior grade primer in contrast with wall Colour.The alphabets of the script and the logo shall be very neat clean and print like finish. The hight of the alphabets shall be 6\"\" to 8\"\" and logo shall be in a Square frame of 1.5 feet. The script and the logo shall be traced on the plastered surface with \"computer printed template cut-out \" to get the title very neat clean and print like finish including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 26 | CSR :ACivilworksProviding and painting the title of the project in Kannada Script and \"NPCIL LOGO\" using approved paint and shade on the plastered surface of the internal wall of the building by professional painter. The alphabets of the script and the logo shall be very neat clean and print like finish. The hight of the alphabets shall be 6\"\" to 8\"\" and logo shall be in a Square frame of 1.5 feet side including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 27 | CSR :ACivilworksProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. |
| 28 | CSR :ACivilworksApplying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. |
| 29 | CSR :ACivilworksWall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. |
| 30 | CSR :ACivilworksFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 31 | CSR :ACivilworksProviding and drawing FINE ART works on Newly Painted Wallsurfaces with suitable pictures/ sripts as selected by Engineer-in-charge with aprroved standard water colour of approved shade and back ground[as per site requirement / as decided by Engineer-in-charge] including preparation of base, providing, fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing [if any] and as directed by Engineer-in-charge at all locations & lifts / heights. Note : Rate includes Cost of paint, brushes and other necessary painting accessories and skilled manpower for design and fine artwork . |
| 32 | CSR :ACivilworksProving and fixing mirror polished Inaugural board of Lacared granite stone of 18 to 20 mm thickness in approved size& shape and quality printed with Computerized Script & \"NPCIL LOGO\" etc.,Inaugural board shall be fixed firmely on the surface of the structure as directed including preparation of base, providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing, as per site requirement and as directed by Engineer-in-charge at all locations & heights. |
| 33 | CSR :ACivilworksProviding and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. Thewaterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. |
| 34 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm. |
| 35 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm and P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 36 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing PVC Pipe 110mm outer dia at 2kg per Sq.Cm for down comer of rain water. |
| 37 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.with all its required accessories and ensuring smooth functioning includingproviding; fixing & removing necessary staging / platform,collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification, manufacturer\"s technical specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 38 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing15 NB, \"Stop Cock\"weight of each shall not be less than 450 grams. with all its required accessories and ensuring smooth functioning including providing, fixing & removing necessary staging / platform, collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 39 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm dia Ball Valves |
| 40 | CSR : BWaterSupplyandSanitoryWorksProviding and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and makingecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 41 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 42 | 20 mm |
| 43 | 25 mm |
| 44 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 45 | 15 mm |
| 46 | 20 mm |
| 47 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing Sewer PVC (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes |
| 48 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete |
| 49 | CSR : BWaterSupplyandSanitoryWorksProviding and fixing NP2 Class, Pre-Cast RCC, Septic Tank of size 2.50 meter long & 1.20 meter outer dia., including necessary excavation[Size of pit shall be 3.50 mete (L) X 2.20 meter (W) X 1.80 meter (D) in in all sorts of soil, including laying bed PCC 1:4:8 of 100 mm thick using 40 mm down size stone aggregates at bottom of Precast RCC Septic Tank] includingloading, carriage, unloading, lowering [without damaging the RCC Septic Tank] in the pit, alighining [to true line & level / slope etc.]; finishing smooth; ensuring smooth functioning & back filling the sides [as directed] etc.,providing; fixing & removing necessary staging / platform, collecting and disposing the generated waste & cleaning the work area etc., complete all as per standard technical specification, manufacturer\"s technical specification and as directed by the Engineer-in-charge at all locations and at all lifts. |
| 50 | CSR : CElectricalsSupply and laying of O.D.20/25 mm of corrugated PVC rigid/ flexible conduits in concealed fashion at Ceiling, column and wall with necessary wire pulling or inspection JB, bends etc along with one run of steel wire. All civil works related to wiring installation such as chasing of walls for embedding PVC conduits and necessary rough plastering should be part of the laying work. The corrugated PVC conduit shall ISIapprovedmake. Theitemsampleshallbeshownto engineer-in-chargeand get approved beforebulk Allaccessoriesandconsumablesrequiredforinstallationareinthescopeofcontractortocomplete thejobinallrespect. |
| 51 | CSR : CElectricalsSupply and pulling of wiring for light/ fan points: Supply and Pulling of concealed 20/25mm corrugated PVC rigid/flexibleConduit and wiring for light points. All civil works related to wiring installation such as chasing of walls for embedding PVC conduits and necessary rough plastering should be part of the wiring work. Every junction an inspection JB with cover must be provided. Thelightingaccessoriessuchasceilingrose,angle /batten holders andrequiredcopperlugsare in contractors scope. All as instructed by the engineer in-charge. The switch, angle holder, adopter, ceiling rose shall BIS approved make. |
| 52 | CSR : CelectricalsSupply, Installation and wiring for 6/16 amps twin socket and 10 amps SP way Modular switch with the connections. Switch board cover in item no 5. All as instructed by the engineer in charge. |
| 53 | CSR : CElectricalsSupply and pulling ofwiring for lighting/power circuits:Wire shall PVCinsulated650/1100Vgrade,copperconductor, multistrandedwireconfirmingtolatestIS: 694. Thecolourcodeof wiresforphaseshallberedandblackfor neutral.Theearthwireshallbeofgreencolourto be laid ininstalledPVCconcealedconduit.Therequiredconsumables to completethejob ofpulling wiresareinthescopeofcontractor. |
| 54 | Supply &pullingof 2 run of Wire of (2 run of 2.5 sq mm for Phase and neutral) Thewiresshallbepulled frommeterboardto switchboards and looping. |
| 55 | Supply &pullingof 2 run of Wire of (2 run of 1.5 sq mm for Phase and neutral)Thewiresshallbepulled fromSwitch boardto10 A switch/socket loopingand Lighting/Fan boards. |
| 56 | Supply &pullingof 1 run of 1.5 sq mm Wirefor earth.Thewiresshallbepulledfrom meterboardtomainswitchboards and from Switchboardto10 A switch socket looping/Fan points. |
| 57 | CSR : CElectricalsSupply and installation ofGI Metal boxfor concealed wiring for fixingmodular switches including base frame and cover plate as per technical specification..All civil works related to wiring installation such as chasing of walls for embedding PVC conduitsand necessary rough plasteringshould be part of the wiring work. |
| 58 | 2 to 4modules solid plate with base frame |
| 59 | 6 to 8 modules solid plate with base frame |
| 60 | 16 modules solid plate with base frame |
| 61 | CSR : CElectricalsSupply and installation of fan: The make of the fan shall BIS approved. The 3 core X 0.75 sq.mm copperflexible cable for connection to be provided. Theitemsampleshallbeshowntoengineerin-chargeandgetapprovedbeforebulksupply. |
| 62 | Supply and installation of ceiling fan 1200mm sweep, 300-375 rpm, 230 V, 1 Ph, 50 Hz, AC, along with its accessories. Itemalso includessupply of electronic steptype fanregulator and installingthemonModular switch board. |
| 63 | Supply and installation ofExhaustfan 300 mm dia/sweep, 230 V, 1 Ph, 50 Hz, AC. andits accessories.Also supply of SS Wire mesh guard for back and opening.Installation work includes assembling, fixing at wall with anchor fasteners and making all the connections including earth connection. |
| 64 | CSR : CElectricalsSupplyand Installationof LED fixturesincludingallaccessorieswith all connections made up to connector.Thefixtures shallbeinstalledon the wall / ceilingbyusingtwonumberPVC round block and6mmcoachscrewforfixing. Necessaryconnectionshasto bemade andfittingsshall beconnectedbyusingadaptorwith3CX0.5Sq.mmPVCinsulated,PVCsheathed,copperconductorcable fromnearestceilingrose/angleholder.(The angle/ pendent holder is covered in item no.2). All as instructed by the engineer in charge and technical specification |
| 65 | .Supplyand Installationof 1x22/20watt, cool day white,Batten Type ,LED fixtures includingallaccessorieswith all connections made up to connector. |
| 66 | Supplyand Installationof7watt,LED(Light emitting Diode) lamp, cool day white. Base B22, Lumen 600, non dimmable, lifetime 15000 hrs. |
| 67 | CSR : CElectricalsSupplyandinstallationofplatetypeearthpit(Confirmingto BIS : 3043)with 600mm X600mmX 6.3mmG.I.plate includingallrequireditemssuchassalt,charcoaletc,. Theearthpitshallbeof2.5 meterdeepexcavated in alltype ofsoil. Theplateshallbeplacedatcentreofpitandshall becoveredwith alternatelayerofsaltandcharcoal. 50mm X 6mm G.I. flat shallbeweldedtothe plateandbroughtuptothetopofpit.40mm of medium class G.I.pipewithfunnelshallbe provided to the fulldepthofpitforwatering. Amasonrychamberof450mmx450mm (frominside)with50mmthickRCCcoverwithliftinghookshallbeprovidedforearthpit.AG.Iwireof8SWGshallbeconnectedfrom earthpittometerboard.Alltheitemstocompletethejobinallrespectisincontractorsscope. |
| 68 | CSR : CElectricalsSupplyandprovidingcatnaryserviceconnectionbyusing4.0sq.mm,2runofpvcinsulated,pvcsheathed (CTS),aluminiumstranded conductor/wire,1100 V,grade,reelinsulatorand10SWGG.Iwire.TherequiredaccessoriessuchasGIwire,hardwares,bindingwire,reelinsulatorsetctocompletethejobinallrespectisincontractors scope. |
| 69 | CSR : CElectricalsSupplyandinstallation ofmetal meterboard (size 45cm x 30cm appx), installedwith onenumber 63 ampsfuse unit, one number DP, 63amps, 30mA sensitivity ELCB (RCCB) 415V. The termination /connectionof incoming powerservicefrompoleto DB & meterboardincludingearthconnectionshallbedoneby contractor.TherequiredaccessoriessuchasGIpipe,GIwire,hardwares,GIclampsetc.,tocompletethe jobinallrespectisincontractorsscope. |
| 70 | CSR : CElectricalsSupply and installation of single phase MCB DB 6 Way. The DB Consisting of6 numbers of6 amps single pole MCB\"swith concealed mountingtype metalenclosure DB and supply of cable end box 8 way concealed mounting type. The DB shall mount on concealed fashion and the required hardware’s and wall chasing and finishing are in contractors scope.All Lighting/Power Circuit shall connect to MCB. |
| 71 | CSR : CelectricalsSupply and installation of Plastic cable end box in concealed mounting fashion for Generator set emergency source cable end. The required hardwares and wall chasing and finishing are in contractor’s scope. |
| 72 | CSR : CElectricals30W Solar LED street light, Fixture with battery, Solar Panel and LED. Light fixture shall weather proof (IP65) with inbuilt dusk to down circuit to ON/OFF automatically. Lumen output shall 1200apprx. and installation includes fabrications of GI bracket suitable to fitting and to be mounted on pole. |
| 73 | GENERAL NOTE FOR ABOVE ITEMS. 1]workshallbeexecutedasspecifiedintheeachitemdescriptionandasdirectedbythe Engineer-in-charge. 2]ItemDescriptionshallbereadinconjunctionwiththeTechnical specification and, drawing,Generalconditionsofthecontractandallotherterms&conditionsspecifiedintheentirebid document. |
