|
| 1 | Sub Head - 1 (Establishment) |
| 2 | Repairs and maintenance of following electrical and mechanical installations, details as follows and according to terms and conditions mentioned as per I.E. rules with specified attendance of wiremen and helpers/khallsis. a) E.i., Lights/Fans/Plug Points/Power Points and Street/Compound lightning arrangements as per I.E. Rules as detailed inside at page. b) Water Supply arrangement c) Water Coolers d) Air Coolers e) Air conditioner f) Feeder pillars/LT panels maintenance. |
| 3 | Wireman- All Working Days |
| 4 | Khallasi- As and when basis |
| 5 | Sub Head - 2 MaterialsMaterials only, for installation, no labour charges is to be involve, as the same has to be get replaced by staff supplied |
| 6 | Supply of FRLS-H PVC Insulated copper conductor single core cable of following sizes |
| 7 | 1.5 sqmm |
| 8 | 2.5 sqmm |
| 9 | Supply of 18/20 Watt LED of retro fitT8 LED tube LED polycarbonate T8 tube with in build driver with metal heat sink , corrosion resistant, impact proof, surface mounting IP65 luminaire. (Min.100 lumens/W) (Inhouse- NABL certified) |
| 10 | Supply of industrial batten suitable for single T8 18 to 22 Watt LED retrofit tube. |
| 11 | Supply of 2 ft, 10 to 12 W wall/ceiling mounted, shockproof, wide voltage protection slim LED Batten, with polycarbonate body with integrated LED driver and accessories with 1 year warranty.(Min.100 lumens/W) (Inhouse- NABL certified) |
| 12 | Supply of 36 Watt LED recessed, 2 x 2 luminaire with CRCA housing ,glare free illumination, seamless front frame with flat white high transmission acrylic cover. (Inhouse- NABL certified) |
| 13 | Supply of 305 mm sweep medium duty / 250mm modular exhaust fan ,1400 RPM,with suitable size of clamps for fixing arrangements as required. |
| 14 | 25 mm dia, ISI marked, PVC conduit. |
| 15 | 20 mm dia, ISI marked, PVC conduit. |
| 16 | Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 17 | Sub Head III - Repairs of Water Pump |
| 18 | Repairs and maintenance existing submersible / Monoblock / monosubmersible water pump. |
| 19 | Lifting & lowering the existing submersiblewater pump alongwith pipe line frombore well including G.I./PVC Pipe Line, Valves etc as required. |
| 20 | Lifting & lowering the existing Monoblock submersiblewater pump alongwith pipe line fromopen well / underground tank including G.I./PVC Pipe Line, Valves etc as required. |
| 21 | Rewinding of submersible / Monoblock / monosubmersible water pump including credit the damage wire. |
| 22 | Repairing by Replacement of required accessories i.e. bearing, impellers, bush,etc in submersible motor pump set. |
| 23 | Repairing by Replacement of required accessories i.e. bearing, bush, impelleretc. of Monoblock / Mono-submersible motor pump set. |
| 24 | Supply of corrosion resistance, IP 68 protection, horizontal type Monoblock submersible pump set suitable for working on 3 Phase, 50 Hz frequency, at rated voltage AC power supply designed to withstand wide voltage fluctuations from 350 to 440 Volts including accessories withthe details given below: Type : 3.7 kW/ 5 HP,Suction and delivery pipe dia : 50 mm and 40 mm respectively,Rated Voltage : 380 Volts,Approximate Characteristics of above Pump Model:Head in Meters:2022242628303234Respective Discharge in Litres per second:4.34.1 3.8 3.5 3.2 2.7 2.2 1.0 |
| 25 | Credit to Estimate : Old unserviceable pump of 3 HP Monoblock submersible pumpis to be taken away by giving the credit to estimate |
