|
| 1 | B/R WORKS |
| 2 | Excavation in trenches n. exc 1.5 m wide for foundations, laying cables/ pipes etc. not exceeding 1.5 m deep and getting out in SOFT/LOOSE soil complete, all as specified. |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers notexceeding 25cm thick complete, all as specified. |
| 4 | Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 5 | Reinforced cement concrete, type B-1,(1:2:4), (nominal mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified. |
| 6 | Reinforced cement concrete,Type B-1, (1:2:4), nominal mix using 20 mm graded stone aggregates, as in beams, cantilevers, bressumers, lintels over 1.5 metre clear span and the like complete all as specified. |
| 7 | PCC type C-1 (1:3:6), using 20 mm graded stone aggregates) as in embedding hold fast including necessary form work etc complete all as specified. |
| 8 | Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 9 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified. |
| 10 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished surfaces of concrete, complete all as specified. |
| 11 | Formwork to edges of concrete slab exc 5cm n exc 10 cm wide for fair finished surfacecomplete all as specified. |
| 12 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window /Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gm) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cu.m, screw withdrawl strength of 2200N Face & 1100 N (Edge), minimum compressive strength of 58 N/ Sq.mm, modules of elasticity 900 N/Sq.mm and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete.Note: For WPC solid door/window frame, minus 5 mm tolerance in diamension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded woodgrain printed PVC Sheet on the front face & 2 mm thick woodgrain printed colur PVC sheet on back face, completeall as specified. |
| 14 | Factory made, 35 mm thick, second class hard wood, plain framed, hammer marked, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete, all as specified. |
| 15 | 35 mm thick ,2nd class hard woodPartly paneled & partly gauzed, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a),etc complete all all as specified. |
| 16 | 17 mm thick medium density fibre board (Pre laminated ) both side laminated, fixed with screws to timber frame work complete all as specified and directed. |
| 17 | Continuous (piano) hinges mild steel bright or electrogalvanised (width of flaps when open in 30 mm ) complete all as specified and directed. |
| 18 | Aluminium anodised barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified. |
| 19 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long,complete all as specified. |
| 20 | Stainless steel 100mm long butt hinges with stainless steel screws, ISI marked complete all as specified. |
| 21 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked complete all as specified. |
| 22 | Stainless steel, handle, 100 mm long, curve shape with stainless steel screws, complete all as specified. |
| 23 | 50 mm long magnetic catcher to kitchen cabinet complete all as specified. |
| 24 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified. |
| 25 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 26 | Mild steel TMT bars 5 mm and over up to and including 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders complete all as specified. |
| 27 | Mild steel bands, straps, supports, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties;plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290-Gde E-165, complete all as specified. |
| 28 | Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. |
| 29 | Factory made steel ventilators with top hung shutters & glazing bars hinge, steel peg stay etc devetailed or welded size and thickness of members confirming to IS 1038complete all as specified. |
| 30 | Steel window with side hung double shutters using steel section with glazing bars including box type hinge, 01 \"Z\" section handle, 02 Nos 100 mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed. |
| 31 | Steel window with side hung double shutters using steel section without glazing bars including box type hinge, 01 \"Z\" section handle, 02 Nos 100 mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed. |
| 32 | Pressed steel frames of size 125 mm x 60 mm made out mild steel1.25 mm thick,for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6)type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified. |
| 33 | Anodised powder coated GIsnap grid frame work of size605mm x 605mm for false ceiling complete with acessories all as specified and shown on serial page No.186 of MES Schedule Part-II. |
| 34 | Hangers 3-6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs / trusses by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 35 | 4-6 mm thick E-board, multipurpose, decorative type fixed in grid frme work ceilings as panels, complete all as specified. |
| 36 | 100 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified. |
| 37 | 100 mm thick, cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate, finished even & smooth without using extra cement, complete all as specified. |
| 38 | Granite jet black shade, 15-17 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished,bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified. |
| 39 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 40 | Glazed ceramic coloured tiles 7-8 mm thick,area of each tile exc. 0.13 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified |
| 41 | Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m,laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified. |
| 42 | First quality, vitrified ceramic, double chargedstraight cut/joint free, 10 mm thick light shade tiles, area of each tilenot exceeding 0.36 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with polymer based groutof matching shade, complete, all as specified. |
| 43 | First quality, vitrified ceramic, double chargedstraight cut/joint free, 10 mm thick light shade tiles, area of each tilenot exceeding 0.36 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in grout of matching shade,laid over and including 10mm thick rendering in cement mortar (1:4), including necessary cutting as per site requirement complete, all as specified. |
| 44 | Factory made PCC chequered tiles, glossy finish,ISIMarked, with grey cement & pigment, 22-25 mm thick, of size 300 mm x 300 mm, in floors, over & including 20 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry complete, all as specified. |
| 45 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6),complete all as specified. |
| 46 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. |
| 47 | Prepration of oldplasteredwall surfaces and applying one coat of interior acrylic distemper complete all as specified. |
| 48 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in 3mm thick two layer & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemperover and including a coat of acrylic emulsion primer. |
| 49 | Complete removal of existing treatment with mechenical scraper of any description, applying Two coats of exterior acrylic emulson over and including a coat of water based exterior primer. including prepration of wall surfaces of any description in disruptive/camouflaging pattern of four / three shadescomplete all specified |
| 50 | Prepration of new plasterd wall surfaces of any description & applying Two coats of exterior acrylic emulsion over and including a coat ofwater based exterior primer in disruptive/camouflaging pattern of four / three shadescomplete all specified |
| 51 | Sheet glass 4 mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified. |
| 52 | Preparation of old painted wood and wood basedsurfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 53 | Two coatsof synthetic enamel paint over & including a coat of pink primer overwood and wood (new) basedsurfaces of any description not other wise described over 10cm width or girth including preparation of surfaces complete all as specified. |
| 54 | Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 55 | Two coats of synthetic enamel paint over & including a coat of red oxide primer oversteel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified. |
| 56 | Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking down existing tube complete all as specified of size: - |
| 57 | 15 mm bore |
| 58 | 20 mm bore |
| 59 | 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIRS, complete all as specified.(iii) Gun-metal stop valve (quarter turn type)with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 60 | Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT,complete. MAKE: Prayag Cat No.9310 or equivalent make mentioned in Appendix \"B\" |
| 61 | 2 way Bib tap/angle valve, cast copper alloy, chromium plated fancy type, long body with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete.MAKE: Prayag Cat No.9313 or equivalent make mentioned in Appendix \"B\" |
| 62 | Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT,complete. MAKE: Prayag Cat No.9308 or equivalent make mentioned in Appendix \"B\" |
| 63 | Pillar tap, cast copper alloychromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT,complete. MAKE: Prayag Cat No.9302 or equivalent make mentioned in Appendix \"B\" |
| 64 | Wall mixer, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. |
| 65 | Overhead ABS 125mm shower with brass arm 225 mm long with flange andfixed in position, IN REPAIRS, complete.MAKE: PRAYAG BS-66 or equivalent make mentioned in Appndix \"B\". |
| 66 | Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, with & including stainless steel body Jet spray (L-bend) with 1.50 metre long braded tube tube, soft close ISI marked PVC seat & cover, IN REPAIRS, complete all as specified |
| 67 | Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked,including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPLACEMENT, complete all as specified. complete all as specified. |
| 68 | PVC low level flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories,IN REPLACEMENT, complete. |
| 69 | Stainless steel (SS-304) sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 915mm x 460mm with bowl size 410mmx 330mm x 160mm, complete. |
| 70 | Health faust with 1 metre SS tube & hook complete. MAKE: PRAYAG Cat No. BEA-97 or equivalent make mentioned in Appendix \"B\". |
| 71 | Looking mirror 600 x 450 mm, selected quality glass 5.5 mm thick, mounted on PVC ply not less than 6 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, complete |
| 72 | Brass chromium plated towel rail600 mm long, fixed to wall with SS screws and PVC rawl plugs, complete.MAKE: PRAYAG Cat No. BA-20N or equivalent make mentioned in Appndix \"B\". |
| 73 | PVC connections 15 mm size of length 450 mm with PTMT nuts,complete all as specified. |
| 74 | 150 mm dia SGSW drain pipes grade A laid in trenches and jointed in CM 1:4 complete all as specified and directed. |
| 75 | PCC type D-2 (1:4:8), using 40 mm graded stone aggregates) as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified. |
| 76 | uPVC pipes,type-B, ISI marked single socketed in any length with rubber ring joints, fixed under floors / fixed to wallas SWR pipes, IN REPLACEMENT, complete all as specified of size: - |
| 77 | 75 mm external dia pipe |
| 78 | 110 mm external dia pipe |
| 79 | uPVC/PVC bend any radius, complete all as specified. suitable for uPVC soil waste discharge pipes,of size: |
| 80 | 75 mm external dia pipe |
| 81 | 110 mm external dia pipe |
| 82 | uPVC/PVC junction single (Single T) equal or unequal 110mm external dia complete |
| 83 | uPVC/PVC vent cowl 75-110 mm external dia, complete all as specified. |
| 84 | 110mm dia uPVC / PVC \"P\" trap complete all as specified. |
| 85 | 75mm dia uPVC / PVCfloor trapincluding jointing with solvent and embedding in cement concrete type B-1 (1:2:4) complete all as specified. |
| 86 | E/M WORKS |
| 87 | Point wiring with multi-stranded copper conductor, single core, FRLSH PVC insulated and unsheathed cable, including FRLSH PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal modular boxes made out of 1.2mm thick MS sheet concealed in wall modular metal flush box & including modular cover plate with framehaving necessary cutting for fixing switches/ socketscomprising the following: - |
| 88 | One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 89 | One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified. |
| 90 | One socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable &1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 91 | One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 92 | One socket outlet three pin, 6/16 Amp, independent, with 4 Sq. mm (nominal area) cable & 4 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. |
| 93 | NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule \"A\". (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4). |
| 94 | Switch modular type single pole one way, 6 Amp, 1 module complete all as specified. |
| 95 | Switch modular type single pole one way, 16 Amp, 1 module complete all as specified. |
| 96 | Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, 2 Module complete all as specified. |
| 97 | Socket outletmultipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp,2 Module complete all as specified. |
| 98 | Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 99 | Lamp (angle) holder, PVC/ polycorbonate type with back plate suitable for batten fittings complete, all as specified. |
| 100 | Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified. |
| 101 | Bell push switch modular type single pole one way, 6 Amp, 1 module complete all as specified. |
| 102 | Sub main wiring2 runs of 10 Sq. mm main cable + 1 run of 10 Sq. mm earth cable(with approved colour coding as per IS) with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, with and including rigid non metallic PVC medium duty concealed conduit not less than 25mm dia complete all as specifiedNOTES: (i)For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as \"1 RUNNING METRE\" |
| 103 | Sheet metal enclosure for DB SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, IN REPLACEMENT,complete all as specified |
| 104 | MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, \"C\" curve type of rating40 to 63 Amp,complete all as specified. |
| 105 | MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, \"C\" curve type of rating 6-32 Amp complete all as specified. |
| 106 | Metal clad box three pin and socket outlet with MCB SP 20/32 Amps, 230 volt 50 Hz suitable for AC/Gyser, complete all as specifird and directed |
| 107 | LED bulb 9 / 10watt complete all as directed. |
| 108 | Surface mounted Environment friendly LED batten with powder coated aluminium housing with intigrated electronic driver with THD<10% LED 20 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per watt,IN REPLACEMENT,completeMAKE: Havells Cat No. LUMILINESMART20WLED865PCWHor equivalent in makes mentioned in Appendix \"B\" |
| 109 | Surface mounted environment friendly LED 10 Wbatten with polycarbonate housing & integrated electronic driver with THD<10% , lumen output should not be less than 90 lumens per watt, IN REPLACEMENT,completeMAKE: Havells Cat No. LUMILINEPLUSPROBS10WLED865SPCSSIND or equivalent in makes mentioned in Appendix |
| 110 | Environment friendly, modern design, energy saving surface mounted, decorative 10 W bulk head LED luminaire with premium quality diffuser for glarefree light, 6000K, including making connections, IN REPLACEMENT,completeMAKE: Havells Cat No. HEXAFT10WLED857SSYMBOPCor equivalent in makes mentioned in Appendix \"B\" |
| 111 | LED security light50 watt outdoor type pressure die cast aluminium housing, heat resistant toughtened glass with frame and lamp with minimum efficiency 120 LM/W, IP 66 protection IN REPLACEMENT and making connections, complete. |
| 112 | Exhaust fansteel body of size 300mm sweep with louvers, 900 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete all as specified. |
| 113 | Ceiling fan complete with blades, down rods, stepped type electronic regulator and accessories, 230 volt, 1400mm sweep with service value 6.00 BEE with brushless direct current motor (BLDC) including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable complete all as specified. |
| 114 | Electric water heater storage type steel body withinner tank (as per manufacturer instruction)and heating element upto 2 kw capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, steel PVC connector for hot water etc including electric connection with 3 core PVC insulated, seathed. stranded copper conductor cable/flexible chord and one no 15 amp 3 pin plug topcomplete all as specified. |
| 115 | Earthing to panel with galvanised steel plate electrode 600 mm x 600 mm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal groung level) with top edge of earth lead wire 4.0 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES Schedule pt-I 2009, protected by 15 mm bore GI light grade pipe. Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mmbore GI light grade pipe for watering and including funnel, wire mesh, RCC cover, reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mess & frame, PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 3 of MES Schedule Part – I.IN REPLACEMENT, complete all as specified. Note:- (i)PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.(iii) Earth resstance shall be less than 3 ohm. In case the test results are not found less than 3 ohm, complete earthing shall be redone by the contractor without any extra cost to Govt. |
| 116 | Supply , installation , commissioning and testing Indoor type prewired LT wall mounting meter panel board of minimum size 1.20m (height) x 1.0 m (breath) x 0.30 m (depth ) factory made CPRI approved panel (Pre wiring of the panel shall be carried out at the factory using 10 sqmm copper conductor wires. All wiring shall strictly follow standard colour coding coling as per relevent IS standards for 3-phase , 4-wire LT distribution system (red,blue,yellow,black& green )). weather ,dust & vermin proof indoor ,double front openable including six compartment for fixing of 05 nos single phase meter and MCB and providing glass view for reading of meter and providing rubber / PVC gasket of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame with PCC work as per requrirement including applying two coat of powder coated paint over a coat of red oxide zinc chrome prime over exposed external & internal surface suitable for 3 phase 4 wire system 415/440 volt grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing/incoming existing cable of any size and also include 2 set neutral link-18 way, 12 mm x 25 mm copper, 2 set neutral link-18 way, 12 mm x 25 mm copper complete all as directed and specified installation, commissioning and testing and comprising of the following fitment accessories:-INCOMING(a)Copper strip busbar of size 32 x 6 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydorgrapic insulators with nuts & bolts at both ends = 04 Nos(b)MCCB IP 44 and IP 66/67 protection, 4 pole,l 415 volts, Lcu=36 KA breaking capacity, rating 200 Amps, adjustable thermal magnetic type, thermal release range (64 to 100%) with O/L, S/C protection including all fixing accessories with both ends spreader links -01 Nos(Make : Legrand/Scheider/L&T). |
| 117 | (c)DIgital Voltmeter of range (0-500 Volts, flush mounting type of size 100mmx100mm(4\"x4\") square dial withy CT\"s of ration 630/5 and selector switch-01Nos (Make: Legrand/Schneider/L&T).(d)LED Neon indicator lamp (RYB) with holder, 230/250 volts, AC-01 Set (set of three) Make:- AE/L&T.OUTGOING(a) MCB single pole & neutral 40-63 amps 240 Volts \"C\" curve 10 KA all completed as specified and as directed-06 Nos (b) MCB Triple pole & neutral 32 amps 415 Volts \"C\" curve 10 KA all completed as specified and as directed-01 Nos.(c) MCB singlepole & neutral 6-32 amps 240 Volts \"C\" curve 10 KA all completed as specified and as directed-01 Nos.(d) supply, installation , testing and commissioning of smart energy meter class 1.0 accuracy, single phase 2-wire 240 V , 50 Hz , 10-60 A (CT- less, whole current type ) with home display unit (HDU) , including software, programming , data integration communication module (RF/GPRS/LoRa as required) , completed with all accesories such as CT/PT (if required ) meter box (weatherproof , tamperproof, flame retardant ) connection cable gland, termination etc as required at site for proper functioning of the smart metering system. |
| 118 | Demolition and Dismantling work |
| 119 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified. |
| 120 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. |
| 121 | Taking down cement plaster of any description on brick walls or concrete surfaces etcincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 122 | Demolition brickwork or stone / boulder masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 123 | Demolition of stone slabs and tiles of any description or thickness in floors/dado, aprons etc laid, bedded and pointed in any mortar complete all as specified. |
| 124 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided all as specified. |
| 125 | Dismantling wall and ceiling boards with snap grid (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 126 | Taking down ceiling fan / exhaust fan & of any sweep after disconnecting all necessary electric connection from ceiling rose and refixing the same to existing position complete all as specified. |
| 127 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 128 | Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc, removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 129 | Note : Amount ofcredit for retrieved materials is mentionedin Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline. |
