|
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.Note: The work is required to be carried out in buildings up to tripple storyed, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 3 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 4 | S&F for steel work in hollow tubular square and rectangular section trusses, purlins and bracing supports etc including any special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1979 grade St.-240, complete all as specified and directed. |
| 5 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/ screwed to wall or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 6 | S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws, complete all as specified and directed. |
| 7 | S&F in repair pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ clading/ to wall, eaves board etc fixed with self tapping screws as specified upto three sotries building, complete all as specified and directed. |
| 8 | M&L for preparation of new/ old steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 9 | S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 10 | Taking down unserviceable 15-20mm bore GI steel water tubing and connections, fittings, complete all as specified and directed. |
| 11 | M&L for 15mm mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors, complete all as specified and directed. |
| 12 | Refixing 15-20mm bore old Steel water tubing and connectionsof all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 13 | S&F in repair 20mm bore dia Gunmetal gate valves with iron wheel head, complete all as specified and directed. |
| 14 | S&F in repair 20mm bore dia Ball brass high pressure with polythene Floot and Flynut complete all as specified and directed. |
| 15 | M&L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as base coarse for floors, complete all as specified and directed. |
| 16 | M&L for 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed. |
| 17 | M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx 30cm x 20-22mm thick, set, jointedand pointed in neat cement slurry with grey cement and pigment in floors, steps complete all as specified and directed. |
| 18 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingincluding 20mmthick screed bed with cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for raised pointing to to squared rubble,coursed or uncoursed masonry in cement mortar 1:4 complete all as specified and directed. |
| 20 | M&L for machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingincluding 10mmthick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 21 | M&L for 15-18mm thick granite(of any type ) worktable rubbed andpolished) in pillar/ vertical surface,cooking platformand like in cement mortar 1:4including pointingin white cement 1:2using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 22 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 23 | M&L for non skid ceramic coloured joint free tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6),complete all as specified and directed. |
| 24 | M&L for glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 25 | M&L for exterior stone craft finish ceramic cladding/ elevation tiles joint free in vertical surfacesof size 350x250x7-8mm/ 450x300-350x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 26 | S&F vitrified ceramic coloured tiles light shade/ double charged 9-10mm thick size 600X600mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed. |
| 27 | S&F Vitrified ceramic coloured tiles light shade/double charged/ ultra charged9-10 mm thick size 600x600 mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps over 10mm thick backing coat in cement mortar 1:4 etc, complete all as specified and directed. |
| 28 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length and making it good to match with existing surface, complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) solid moulded door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges shall be paid separately however SS screws rates are included in the item itself. |
| 30 | Taking down shutters of any description exc 1sqm each and n exc 2 sqm each, complete all as specified and directed. |
| 31 | S&F factory made plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 32 | M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 33 | S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed. |
| 34 | S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. |
| 35 | S&F mild steel butt hinges, medium weight 100 mm size fixed with steel screw, complete all as specified and directed. |
| 36 | S&F in repair 100mm extruded brass handles, fabricated type polished complete all as specified and directed. |
| 37 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 38 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 39 | S & F in repair floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors . |
| 40 | S&F in repair door closer hydraulically regulated, aluminium body, designation No. - 2, universal type, suitable for door shutters of weight between 36 to 60 kg, complete all specified and directed. |
| 41 | Taking down cement plastering of any description on brick/ stone/ concrete wall surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 42 | M&L for rendering 10mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement,.complete all as specified and directed. |
| 43 | M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and fair without using extra cement with WPC complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 44 | M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over acoat of a chalk whitening priming surface and with wall care putty (2mm thick), complete all as specified and directed. |
| 45 | M&L for prepartion of newly plastered surface of wallapplying two coat of weather proof anti fungal exterier emulsion paint on external surfaces includinga coat of alkali resistant priming paint of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 46 | M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion painton external surfaces including a coat of alkali resistant priming paint at any height of building / tower complete all as specified and directed. |
| 47 | Supply only Integral water proofing compound, complete all as specified and directed. |
| 48 | Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed. |
| 49 | M&L for brick work with old size kiln burnt sub class \"B\" bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed. |
| 50 | S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod, complete all as specified and directed |
| 51 | S&F in repair 15mm bore bib taps,chromium plated, fancy type,cast copper alloy with crutch or butterfly handle , screwed down, secrewed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 52 | S&F in repair 15mm bore stop cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed. |
| 53 | S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed. |
| 54 | S&F in repair 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed, complete all as specified and directed. |
| 55 | S&F in repair 15mm bore stainless steel chrome finish angle/urinal valve with flange screwed one end of iron pipe or for union and fixed, complete all as specified and directed. |
| 56 | S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed. Make- ESS ESS Cat part No DE-12 or equivalent to Parryware/ Nirali/ Prayag |
| 57 | S&F brass chromium plated wall mixer for mixing hot & cold water including Hand Shower screwed down for iron pipe and fixed, complete all as specified and directed. |
| 58 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 59 | S&F in repair PVCbathroom cabinet mirror 450x350mm complete all as specified and directed. |
| 60 | S&F in repair swivel shower of chromium plated any colour with shower arm 15 mm size 195 mm long with bend of 45 degreewithflange of any colour for fixing with 15mm pipe. (Minimum weight 40gms), complete all as specified and directed. |
| 61 | S&F in repair towel ring of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms), complete all as specified and directed. |
| 62 | S&F in repair soap dish approximately size 160 x160x 90 mm and fixed withas chromium plated brass screws complete all as specified and directed. |
| 63 | S&F for in repair PVC corner shelf with bracket complete all as specified and directed. |
| 64 | S&F CP brass teliphonic spray(ABS Body) (health faucet) mild steel chromium plated with flexible pipe 1.25m long and ABS hookfixed to EWC suitable for 15mm bore of pipe fixed in repair complete all as specified and directed. |
| 65 | S&F in repair CP grating doom 100mm dia complete all as specified and directed. |
| 66 | S&F in repair aluminium door seal (rat proof) fitted in door leaf with screw complete all as specified and directed. |
| 67 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted with PVC mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 68 | S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts complete all as specified and directed. |
| 69 | S&F in repair for brass CP fancy type 15mm bore pillar tap for WHB, complete all as specified and directed. |
| 70 | S&F in repair of 60cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed. |
| 71 | S&F in repair CP Toilet paper holder with flap coverfixing with all necessary arrangementsscres etc., complete all as specified and directed. |
| 72 | S&F in repair vitreous china urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed. |
| 73 | S&F in repair Vitreous china urinal partition white of size 310x700 mm above 40cm floor line all as directed by Engr-in-Charge. |
| 74 | S&F urinal spreader of chromium plated brass for fixing with 15 mm dia pipe, , complete all as specified and directed. |
| 75 | S&F in repair vitreous china squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc (excluding flushing cistern and flush pipe, complete all as specified and directed. |
| 76 | S&F in repair vitreous china wash EWC water closet pan white fixed in floor including P or S trap, connecting to drain (or outgoing pipe) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc., complete all as specified and directed. |
| 77 | S&F in repair plastic water closet seat cover, white/ coloured, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 78 | S&F in repair 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed. |
| 79 | S&F in repair wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length, complete all as specified and directed. |
| 80 | S&F looking mirror (900x600x6mm) with frame, complete all as specified and directed. |
| 81 | M&L for hacking out old broken gass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with deads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 82 | S&F sheet glass ordinary quality 4mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 83 | S&F in repair 75 mm dia, cast iron floor trap with SS grating incl jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and directed. |
| 84 | M&L for filling cracks less than 3mm with Asian Paints/Pidilite crack seal or equivalent as per manufacturer instructions, complete all as specified and directed. |
| 85 | M&L for waterproofing for internal dampness with asian paint hydrolic waterproofing coat or equivalent as per manufacturer instructions and covering after complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying one coat of asian paint hydrolic waterproofing Coat on saturated dry surface without dilution, complete all as specified and directed. |
| 86 | M&L for salt-glazed stoneware drain pipes of 150mm bore, laid in trenches and jointed as specified complete all as specified and directed. |
| 87 | M&L for concrete bed to drain pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6, type C-2, complete all as specified and directed. |
| 88 | M&L for waterproofing for roof leakage with asian paint smartcare damp proof or equivalant, surface to be prepared by extensive cleaning removing all the rubbish from roof and side walls, washing with pressure water, drying the surface, filling cracks less than 3mm with Asian Paints/Pidilite crack seal sealant. Applying priming coat mixed with water as per manufacturers instruction and applying second and third coat without mixing any water with roller/ brush, complete all as specified and directed. |
| 89 | M&L for cutting into existingmanholes for connecting new drains, making good to pipe having internal dia of 150mm and rendering, cutting outexisting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished, and reforming benching as required, complete all as specified and directed. |
| 90 | M&L for applying two coats of oil bound distemper over aone coat of birla white putty 3mm thick on walls, complete all as specified and directed. |
| 91 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse or refixing the same, including provision of wires, etc at site or carrying to the store (To be measured only when found serviceable in all respects, complete for reuse) complete all as specified and directed. |
| 92 | Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 93 | M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing capping/ conduit 25mm size with all fittings and accessories, terminated to PVC board of suitable size for housing/ mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and as directed. |
| 94 | All as per Srl Item No 93.00 above but for one 3 pin socket outlet 5 amps, onsame board with other switches, complete all as specified and directed. |
| 95 | All as per Srl Item No 93.00 above but for one 3 pin socket outlet 5 amps, onindependent board, complete all as specified and directed. |
| 96 | All as per Srl item No 93.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm, complete all as specified and directed. |
| 97 | All as per Srl item No 93.00 above butin existingconcealedsteel Conduit/ Casing-N-Capping complete all as specified and directed. |
| 98 | All as per Srl item No 97.00 above but one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed. |
| 99 | All as per Srl item No 97.00 above but one 3 pin socket oulet 5 amps, onindependent board, complete all as specified and directed. |
| 100 | All as per Srl item No 97.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm, complete all as specified and directed |
| 101 | S&F switch piano flush single pole, one way 5 Amp ( ISI marked),complete all as specified and directed. |
| 102 | S&F switch piano flush single pole, one way 15 Amp ( ISI marked),complete all as specified and directed. |
| 103 | S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type, complete all as specified and directed. |
| 104 | S&F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal, complete all as specified and directed. |
| 105 | S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked), complete all as specified and directed. |
| 106 | M&L for lamp holder (Angle) PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 107 | S&F LED 14 watt, complete all as specified and directed. |
| 108 | S&F LED tube light along with fixture, 1x20watt, (4 Feet) wall mounted LED battern, integrated electronic driver with heat sink provided for efficient heat dissipation, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. Make: Havells/ HPL or in equivalent as approved. |
| 109 | S&F LED tube light along with fixture, 1x10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. Make: Havells/ HPL or in equivalent as approved. |
| 110 | S&F LED bulkhead luminaire 20W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as specified and directed. Make: Havells/ HPL or in equivalent as approved. |
| 111 | S&F LED building securtiy light 40 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. Make: Havells/ HPL or in equivalent as approved. |
| 112 | M&L for submain wiring with 2x6.0Sqmm+1x6.0Sqmm earth wire single core PVC insulated FRLS-H, PVC sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit. |
| 113 | S&F MCB SP (single pole ) 06 to 32 Amps, \"B\" Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed.Make: L&T/ Legrand/ Schneider. |
| 114 | S&F MCB SPNDP (single pole and neutral) 32/ 40 Amps \"B\" Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider. |
| 115 | S&F MCB SPN/DP (single pole & neutral) 240 volt 63 amp \"B\" Curve with 10 kA for inductive loadconnected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider. |
| 116 | S&F MCB protected socket 15/20 Amp including 25 Amp MCB suitable for domestic and commercial uuse gyeserwith PVC box, sheet steel enclosure (ISI marked) flush type, complete all as specified and directed. |
| 117 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32 mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20 mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15 cm compacted thickness all arround the GI electrode with concrete pit in PCC 1:3:6, type C-1, including necessary excavation in soft/loose soil and disposal of soil to a distance not exc 50 m and necessary testing completeconnected to earthing test point, complete all as specified and directed. |
