|
| 1 | Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement. |
| 3 | M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) withusingWPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement. |
| 4 | M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over and including 1mm thick wall care putty on ceiling complete all as specified and directed |
| 6 | Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over and including 1mm thick wall care putty on ceiling complete all as specified and directed |
| 7 | M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over and including 1mm thick wall care putty on walls complete all as specified and directed |
| 8 | Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over and including 1mm thick wall care putty on walls complete all as specified and directed |
| 9 | M&L for preparingthe new plastered surfacesand applying twocoats of exterior Emulsionweather proof coat white or tinted on walls/soffit of chajjasurfaces complete all as specified & directed. |
| 10 | Complete removal of existing treatment and applying two coats of exterior Emulsionweather proof coat white or tinted on walls/soffit of chajjasurfaces complete all as specified & directed. |
| 11 | Supply only integral water proofing compound. ISI marked |
| 12 | Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site and directed. |
| 13 | Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4.00 Sqm each with shutter without taking of shutter from framed complete incl removing from site and directed. |
| 14 | M & L for Pressed steel frames for doors (105X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 15 | M&L for pressed steel frames (125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified & directed. |
| 16 | M & L for Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290. complete all as directed. |
| 17 | M&L for cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed. |
| 18 | S&F flush shutter (35mm thick), solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed. |
| 19 | S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squareswithplain chamfered or rounded mitred and rebatedfitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8,clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed. |
| 20 | S & F powder coated anodised alm ventilator louvre type with two separate frame of size 50.5mmx40mmx1.5mm thick (01x frame for fixing of 5mm thick coloured glass & 01x frame for fixing SS wire mesh) powder coated anodised aluminiumsection weighing 0.55 kg/m including 5mm thick coloured glass, SS wire mesh and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed. |
| 21 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e)4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j)aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid. |
| 22 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified. |
| 23 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified & directed. |
| 24 | S & F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 25 | S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as directed at site |
| 26 | S&F 150 mm long aluminum anodized barrel tower bolt extruded section. |
| 27 | S&F aluminum handles cast type anodize 150 mm long. |
| 28 | S&F for 300 mm mild steel helicalspring including roller and roller plate, complete all as specified and directed |
| 29 | S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long. all as specified & directed |
| 30 | M&L for applying two coat of synthetic enamelled paintover one coat of pink primer onnew wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed |
| 31 | M&L for applying one coat of synthetic enamel painton old paintedwoodensurfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed |
| 32 | M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth. Complete all as specified & directed. |
| 33 | Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.all as specified & directed. |
| 35 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as specified & directed. |
| 36 | All as item No 35 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 |
| 37 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 Complete all as specified & directed.. |
| 38 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as specified & directed. |
| 39 | M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair.Complete all as specified & directed. |
| 40 | M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc. all as specified & directed. |
| 41 | M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded aggregate as in sub base all as specified and directed. |
| 42 | M&L for 75 mm thick PCC 1:3:6Type C-2 using 40mm graded stone aggregate as in plinth protection etc finishedcement concrete surface even and smooth without using extra cement all as specified & directed. |
| 43 | M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 44 | M&L forrepair and rendering 10mm thickin cm 1:3on chajjas not exceeding 60cm width after removing cracked plaster and concrete includingcleaning of viisible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedstone aggregateincluding necessary scafolding work for double/single storey bldgs all as directed. |
| 45 | M&L for roof treatment in repair by complete removel of existing oldtreatment and treatedwith following specifications :-(a)Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b)15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c)Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture\"s instruction.(e)Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane.Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 46 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design & directed. |
| 47 | Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed. |
| 48 | S&F in repair for PVCconnection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed. |
| 49 | Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site |
| 50 | All as per item No 49 above but for 20 mm dia bore pipe |
| 51 | S&F steel tubing and connectiontubingin new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site for 15 mm bore all as specified & directed. |
| 52 | -Ditto-All as above item No 51 but for 20 mm dia |
| 53 | S&F 15 mm Angle/Stop valves,fancy type chromium plated, or butterfly handle, screwed both ends for iron pipe or forunions and fixed |
| 54 | S&F in repair, 15mm borebib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed |
| 55 | S&F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipecomplete all as specified and directed. |
| 56 | S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed |
| 57 | M&L in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed. |
| 58 | S&F in repair vitreous china wash basin, white flat back size 550 x 400 mmincluding waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed |
| 59 | M &L 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building boardor commercial ply wood and fixed to wooden ply with chromium plated brass screws and cup washers. |
| 60 | S&F brass chromium plated tubular towel rail 20 mm dia \"D\" type 60 cm long between flanges complete all as specified and directed |
| 61 | S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 62 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site |
| 63 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 64 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 65 | S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed |
| 66 | S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.. |
| 67 | S&F PVC (SWR) junction single (singleT) equal or unequal110mm bore provided with access door all as specified & directed.. |
| 68 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.. |
| 69 | S&F 110 mm bore PVC (SWR) vent cowl. |
| 70 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement. |
| 71 | S&F 110mm dia PVC (SWR) WC connector with lip ring |
| 72 | S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as specified & directed. |
| 73 | S&F in repairs CP soap dish approximate size 160x160x90mm all as directed |
| 74 | M&L for preparingthe new plastered surfacesand applying twocoats of exterior Emulsionweather proof coat white or tinted on walls/soffit of chajjasurfaces complete all as specified directed. |
| 75 | M&L for complete removal of existing treatment and applying two coats of exterior Emulsionweather proof coat white or tinted on walls/soffit of chajjasurfaces complete all as specified directed. |
| 76 | All as above item No 75 but for refixing only. |
| 77 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately |
| 78 | M&L for cleaning and removing all scale and dirt etc, from 1000 ltr tanks and from mouths of circulating pipes etc,complete all as specified and directed. |
| 79 | S & F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 80 | Dismantalling of existing water tanks and removing from site and S&F 750 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. complete all as specified and directed. |
| 81 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as directed. |
| 82 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good thedisturbed surfaces of walls,floors roofs etc complete all as directed. |
| 83 | Taking down Old/ Unserviceable MCBDBs SPN/TPN/ Main Switchesby disconnection of electric connection including old unsvMCCBs,MCBs, isolators etc and making good to distrubed surface complete all as directed. |
| 84 | M&L point wiringfor One light/Fan point controlled by onefive amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn throughPVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screwas suitablesize for mounting ofswitch & scoketincluding 1.5 sqmm size pvc insulated unsheathed copperconductor to common earth and connecting to earth dolly complete all as specified and directed.Note: Therate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing ofswitch and scoket including cutting chases in wallmaking good to disturbed surface and matching with existing surfaces. |
| 85 | All as per Ser item No 84 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. |
| 86 | All as per Ser item No 84 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board. |
| 87 | All as per Ser item No 84 here-in-before butpoint wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly. |
| 88 | S&F Switch modular 1 way 6 Amps single pole complete all as specified & directed. |
| 89 | S&F Switch modular singlepole , one way 16 Amps complete all as specified and directed. |
| 90 | S&F Socket modular 2/3 pin combined 6 Amps complete all as specified and directed. |
| 91 | S&F Socket modular 2/3 pin combined 6/16 Amps complete all as specified & directed. |
| 92 | S&FCeiling rose,3 terminal PVC/polycarbonatecomplete all as specified and directed. |
| 93 | S&F modular Fan step regulator 230 Volts single phase 120 watt, 2 modulecomplete all as specified and directed. |
| 94 | M&L for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia midium grade as per site requirement along walls/ceilingetc including 4.0 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surfaceconduit to be done to match with walls/ceiling existing surfaces.(iii) Two run of wire (phase & neutral) and one run of wire (earth conductor)be measured as one length) |
| 95 | All as per ser item No-94 here-in-beforebut 2X6 Sqmm and 1X 6.0 Sqmm for Earth wire |
| 96 | Supply and fixMCBDB SPN 8 way double door with metal door suitable forhousing of MCBsgrouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. |
| 97 | S&F in replacement ofMCB SP 6 to 32 Amps \"C\" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 98 | S&F in replacement of MCB DP 40Amps \"C\" Series 10 KAfixing in DBs, connecting with bottel type copper thimbles. |
| 99 | Supply and fix MCCBDB VTPN 4 way with metal door suitable forProvision ofincommer and out going MCCBs/MCBsgrouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 100 | Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed. |
| 101 | S&F in replacement ofisolator DP 63 Amps \"C\" Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 102 | S&F in replacement of LEDtube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting withaluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting upwith twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and directed at site. |
| 103 | S&F in replacement of building LED security light fitting 25 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device.luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site. |
| 104 | S & F Ceiling fans complete with blades, down rods, electronic regulator and accessories,230 V. 1200 mm sweep, Min air dilivery 210 CFM With service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete including taking down old fan and deposited to store yard as specified and directed.Note:- MES No. shall be written by the contractor on fan and rates shall be deemed to be included in quoted rates |
| 105 | S&F exhaust fan steel body AC single phase, 230Volts of size300 mm sweepcomplete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete including taking down old exhust fan and deposited to store yard all as specified and directed.Note:- MES No. shall be written by the contractor on fan and rates shall be deemed to be included in quoted rates |
| 106 | S&F water heater storage type electric driven single phase 50 Hz of capacity 25 litres, SS tank fire retardant cable and having withstand 6 bar pressure including all connection pipe and accessories complete all as specified and directed. |
| 107 | Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 25 sqmm 4 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductorcable all as spedified & directed. |
| 108 | Excavation intrenches in loose/soft soil not exceeding 1.5 metrewide and not exceeding 1.5 metredeep for laying of cables,poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as directed. |
| 109 | Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as directed. |
| 110 | Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick. Complete all as directed. |
| 111 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement . |
| 112 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed |
| 113 | M &L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge. Note :- i) Earthing test must be carried out in presence of Engr-in-Charge.ii) The earthing resultnot more than 2 Ohms or disered earth resistance value.iii) Meggerrequired for testingwill bebe provided at site by the contractor.iv) Contractor shall submit earth resistance testing report before submission of bill. |
| 114 | S&F water heater (Geyser) storage type, electric driven of capacity 25 litres including necessaryaccessories BEE 5 star rated complete all as specified anddirected. |
| 115 | S&F bib taps, 15 mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for pipes or for brass ferrule complete all as specified and directed. |
| 116 | Supply and fix PVC connection pipe hot and coldof size 15 mm dia with PTMT nuts of length 750mm suitable for geyser complete all as specified and directed. |
| 117 | S&F stop 15 mm bore valve cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for pipes and unions complete all as specified and directed. |
| 118 | S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified anddirected. |
| 119 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
