|
| 1 | Removing/chisel old plaster or skiriting of any thickness raking out joints and clearing the surface for plaster on all floor including stacking of unserviceable material on ground floor within the premises as per directions of Engineer-incharge |
| 2 | Demolishing cement concrete/removing existing filling in the sunken area manually/ by mechanical means ncluding disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | Dismantling tile/Stone/Cementatious floring work in floors/wall of any thickness with cement mortar including stacking at ground floor & disposal of unserviceable material as per direction of Engineer-in-charge. |
| 4 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of form work in foundation & floors. |
| 5 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. |
| 6 | Brick work in super‐structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand) (230mm wall) |
| 7 | Mild steel or iron work of small sizes and sections such as hold fast etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 8 | Mild steel or iron work of heavy sizes section & angle iron door frame etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 9 | Supply & fixing flush doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, Bolts, Locks, Handles, Springs, fittings with necessary screws to be supplied departmentally. |
| 10 | Miled steel or iron work in heavy sizes such as built up gates, z‐section steel windows etc, wrought to required form including drilling holes, revetting or welding where necessary and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work. |
| 11 | Miled steel or iron work in heavy sizes such as built up gates, Grill etc, wrought to required form including drilling holes, revetting or welding where necessary and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work. |
| 12 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with (4.0mm thick float glass) |
| 13 | 12mm thick plaster in inner walls with proportion of 1:6 cement & approved coarse sand |
| 14 | 15 mm thick plaster in Outer walls with proportion of 1:6 cement & approved coarse sand |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 17 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 19 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 20 | Painting or vernishing on iron work in small areas of new work with one coat of rady mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic vernish, including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 21 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with averagewidth of aperture 1.4mm inboth directions with wire of dia 0.63 mm all complete With 2nd class teak woodbeading 62X19 mm |
| 22 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5.5mm |
| 23 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry ofcement @ 0.242 kg/sqm mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed withwater curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 24 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. |
| 25 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyedtorequired colour or shade with necessaryscrewsetc.complete: 100x63x4 mm |
| 26 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 28 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 29 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and apair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screwsetc. complete: 300x10 mm |
| 31 | Providing and fixing white vitreous china pedestal type water closet ( W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 32 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40gms |
| 33 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 34 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 35 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete Flexible Pipe |
| 36 | Providing and fixing PTMT grating of approved quality and colour |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes and fittings withone step CPVC solvent cement and testing of joints complete as per direction of engineer incharge |
| 38 | Providing and fixing hand held ablution fitting (health faucet) with 1.2 meter long flexible tube and wall hook, all complete approved engineer-in-charge |
| 39 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 40 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. |
| 41 | Providing and fixing automatic water level controller for overhead tank with all fittings and fixtures complete. |
| 42 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required. (7 x 1.5 sq. mm) |
| 43 | Laying of one number PVC insulated & PVC sheathed/ XLPE Power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. |
| 44 | Supply of 20 Watt LED light Wall Mounted BRACKET light fitting Sutaible for 220 volts SinglePhase A C Supply complete with all accessories as required.. |
| 45 | Supplying and fixing following modular switch/ socket onthe existing modular plate & switch box includingconnections but excluding modular plate etc. as required. 15/16 A switch |
| 46 | Supply of LED Luminaires BATTEN 20W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with EndCaps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥100) |
| 47 | 300 mm sweep 900 RPM ( in plastic body)Ventilating fan |
| 48 | 300 mm sweep 900 RPM ( In metal body) exhaust fan |
| 49 | Supply of following size sweep, BEE 5 star rated, white colour ceiling fan with all accessories i.e. 3 nos. blades, 30 cm long down rod, 2 nos. canopies shackle kit, safety rope, copper winding, safety pin,nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 50 | Supplying and fixing Two Module Stepped Type Electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Please Enable Macros to View BoQ information |
