|
| 1 | Demolition of brickwork or stone/boulder masonry/PCC block masonry,built in cement mortar or cement lime morter including all quoins, arches, pillars,etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | Demolition of reinforced concrete roof, floors beams chajjas and similar works complete all as specified and as directed. |
| 3 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 4 | Taking down chowkhats or frame with shutter without taking off shutter from the frame .exc 1.50 sqm complete all as specified and as directed. |
| 5 | Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep; for foundation etc n.exc.10 Sqm on plan and getting out soft / loose soil complete all as specified and as directed. |
| 6 | M & L for PCC (1:4:8), type D-2, using (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | M & L for precast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in CM 1:4, type C1 1:3:6 (20mm graded aggregates) complete all as specified and as directed. |
| 8 | M&L RCC (1:2:4), Type B1 (using 20mm graded agg) as in lintels beams etc complete all as specified and as directed. |
| 9 | Form work to sides and soffits of RCC beam, lintel bands complete all as specified and as directed. |
| 10 | Taking down cement plsteron brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 11 | S&F 1.40mm dia steel wire cloth of mesh size 25mm fixed with nails on walls joinings under plaster surfaces complete all as specified and as directed. |
| 12 | M & L for rendering 15mm th on other than fair faces ofof brick work or Concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M & L 15mm thick for rendering fair faces of brick work or Concrete surface in CM (1:4) as finishing mixed with integral water proofing compound @ 2% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note: Water proofing compund shall be measured and paied seperately) |
| 14 | M & L 10mm thick for rendering onbrick work or Concrete surfacein CM (1:4)as back coat to recieve wall tilesmixed with integral water proofing compound @ 2% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note: Water proofing compund shall be measured and paied seperately) |
| 15 | M&L RCC 1:2:4, Type B1 (using 20mm graded agg) as in coping, bed plates, haunching to manhole and similar works complete all as spd and directed. |
| 16 | M&Lfor preparation of newlyplastered wall surfaceapplying two coats of acrylic distemper over a coat of alkali resistant priming coat on wall complete all as specified and as directed. |
| 17 | Providing and applying plaster of paris putty of 2mm thick over plastered surface to prepare the surface evena nd smooth complete all as specified and as directed. |
| 18 | M& L for preparation of new plastered surface of wall, and applying two or more coats of premium acrylic exterior emulsion paint of required shade includling priming coat of exterior primer applied @ 0.90 ltr/10 Sqm complete all as specified and as directed. |
| 19 | M&Lfor preparation of newly plastered wall surfaceapplying two coat of acrylic distemper on wall over a coat of chalk whiting on plastererd surfaces preparatory to distempering complete all as specified and as directed. |
| 20 | M&L two coats of cement base paint over a coat of primer and preparation of new surpaces complete all as specified and as directed. |
| 21 | M&L RCC 1:2:4, Type B1 (using 20mm graded agg) as in slabs supported on walls, landingsetc complete all as specified and as directed. |
| 22 | Formwork to soffits of suspended slabs on flat fair finished surfaces such as roof slabs, floor slabs, landings and siminlar work n.exc 200mm thickcomplete all as specified and as directed. |
| 23 | S & F mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 24 | S & F mild steel TMT bars, 5mm dia and over up to including 10mm dia in stirrups, cut to length, bent to shape required, including bendingfor columns, beams hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 25 | M&L hardcore of gauge n exc 63mm diposited, spread and levelled in lagers n exc 15cm thick, watered and rammed to a true surface with broken stone complete all as specified and as directed. |
| 26 | M&L moorum filling in floors laid in lagers n.exc 15cm thick spread levelled and rammed including Watering complete all as specified and as directed. |
| 27 | M & L for 75mm thick PCC (1:4:8) , type D-2 using (40mm graded stone aggregate) as in floors complete all as specified and as directed. |
| 28 | M & L for 25mm thick PCC (1:2:4) , type B-0 using (12.5mm graded stone aggregate) as in floors complete all as specified and as directed. |
| 29 | Dismantling floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 30 | M&L Non-skid ceramic coloured tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 31 | M&LGlazed ceramiccolour tiles of size 350 x 250 x 7mm / 450 x 350 x 7mm thick set and jointed with neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 32 | S&F Steel work in tubular trusses, Purlin,Post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 33 | S&F plain/chequered plates channels FE 410-W(Gde 250 quality), square cut or notched forming holes without any attachment complete all as specified and as directed. |
| 34 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 36 | M&L for preparation of newl steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxidecomplete all as specified and directed. |
| 37 | S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed. |
| 38 | M & L for 6mm thick Non Asbestos cement plain building boards in false ceiling, fixed or laid/inserted to/GI/aluminium framework with screws on ceiling complete all as specified and as directed. |
| 39 | S&F anodised aluminium frame for doors, window ventilators, partations with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed. |
| 40 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clip, rubber packing , handles 02 Nos for each door, hinges anodised aluminium snap beaning screws etc complete all as specified and as directed. |
| 41 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clip, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos), hinges type B-21 100mm long(2 Nos), suitable handle 1 Nos complete all as specified and as directed. |
| 42 | S&F Anodized aluminium grill (anodised tranparent or dyed to required shade according to IS:1868 with minimim anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws \"200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumium standard section around the opening complete all as specified and as directed. |
| 43 | S&F 4.8mm thick sheet glass ordinary quality and glazing in squaresnot exceeding 0.50 sqm in each pane of aluminium door / window/ complete all as specified and as directed. |
| 44 | S&F 12mm thickPrelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 45 | M&L for 150mm bore reinforced concrete pipes, class NP2 laidin trenches and jointed in cement mortar (1:1) including testing complete all as specified and directed |
| 46 | M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) bed to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 47 | Cutting into existing manholes for connecting new drains, making good ato pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finshed and reforming benching as required complete all as specified and as directed. |
| 48 | M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and even complete all as specified and directed. |
| 49 | M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed. |
| 50 | Supply only integral water poofing compound (PIDIPROOF LW) |
| 51 | S&F Vitreous China Wash basin of size (550x400mm) , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 52 | S&F vitreous china wash down water closet pan (pedestal pattern), white in colour including trap,connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 53 | S&F plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 54 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 55 | M&L in repairsfor PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and as directed. |
| 56 | S&F125mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or uniion complete all as specified and as directed. |
| 57 | S&FCP bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. |
| 58 | S&F in repair 15mm bore concealed stop cock in CP with adjustable wall flange (Make.Hindware, Cat No. F200007) or its equivalent complete all as specified and as directed. |
| 59 | S&F in 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. . |
| 60 | S & F 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. |
| 61 | S & F 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated screwed down high pressure, with long screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F Fancy type chromium plated angle cock, cast copper alloy, screwd down high pressure with crutch or butterfly handle screwed both ends for iron pipe for for unions and fixed complete all as specified and as directed. |
| 63 | S&F 32mm dia of waste coupling of PTMT(half or full threaded of minimum weight 45 gms in wash basins complete all as specified and as directed. |
| 64 | S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass scres and wooden / plastic cleats of minimum weight 190 gms complete all as specified and as directed. |
| 65 | S&F Health faucet (ABSbody) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixed in position complete in complete all as specified and as directed. |
| 66 | S & Fsteel water tubing 15mm bore. medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down complete all as specified and as directed. |
| 67 | Ditto as per item no but 20mm bore. |
| 68 | S & F for 1000Ltr rotational moulded polythene water storage tanks (cylindrical vertical with closed top) in white colur tripallayer of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position including 20 mm dia ball valves high pressure of PTMTcomplete all as specified and directed. |
| 69 | S&F grating doom 125mm dia with waste hole of PTMT (min weight 40 gms) complete all as specified and directed. |
| 70 | M & L for 75mm thick PCC (1:3:6) , type C-2 using (40mm graded stone aggregate) as in plinth protectionfinished even & smooth without using extra cement making 10mm wide joints at every 3m interval and at every corner, filled with hot mix of bitumen complete all as specified and as directed. |
| 71 | S&F for 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 72 | M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 73 | S&F 110mm bore PVC (SWR) P Trap complete all as specified and as directed. |
| 74 | S&F 110mm bore PVC (SWR)bends complete all as spd and directed. |
| 75 | S&F PVC (SWR) reducer complete all as specified and as directed. |
| 76 | S&F 75mm PVC (SWR) Vent cowl complete all as specified and as directed. |
| 77 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls complete all as specified and as directed. |
| 78 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 79 | M&L PVC SWR gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed. |
| 80 | Returning filling incl spreding leveling watering and well ramming in layout n. exc. 25cm in soft and loose soil complete all as specified and as directed. |
| 81 | Removal of excavated material n. exc.50mtr and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed. |
| 82 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 83 | Taking down MCB DBs incl MCBs of any capacity by disconnecting existing cables complete all as specified and as directed. |
| 84 | M&L for Point wiring One light/fan point controlled by one switch using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing and caping/PVC conduit and its fittings ISI marked, with metal flush boxes suitable for modular/normal switch/sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and as directed. |
| 85 | Ditto as per item no above but One socket out let 5 pin 5 Amp on independent board |
| 86 | Ditto as per item no above but One socket out let 5 pin 5 Amp on same board |
| 87 | Ditto as per item no above but using 4.0 Sqmm cable for one 15 A socket outlet point with 2.5 Sq mm PVC insulated, unsheathed copper conductor cable as earth continuity conductor complete all as specified and as directed. |
| 88 | Supply and fix modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 89 | S & F Modular socket outlet 1 way 6 Amps 2/3 pins combined, 2 module complete all as specified and as directed. |
| 90 | S & F White cover plate with frame, 3 module including metal flush box 3 module complete all as specified and as directed. |
| 91 | S & F White cover plate with frame, 6 module including metal flush box 6 module complete all as specified and as directed. |
| 92 | S & F White cover plate with frame, 8 module |
| 93 | S & F for power unit mini modular MCB box 4 way with mini MCB 25 Amps SP with ISI plug top with plastic enclosure for connecting AC\"s upto 2 ton complete all as specified and as directed. |
| 94 | S & F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ccomplete all as specified and as directed. |
| 95 | S & F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 96 | S & F for decorative wall lights made uo of high grade entineering plastic material suitable for 9W LED lamp B22 base complete all as specified and as directed. |
| 97 | S & F for MCB DB\"s 4 Way TPN, 415 volts for mounting MCBs/RCBO\"s ELCB\"s etc. as per IS specification of factory made fabricated out of CRCA sheet 1.2 mm thick powder coated fitted with DIN Channel neutral link and 200 Amps rated bus bar.The DB\"s shall double door type. Inner door fixed on spring loaded hinges with locking arrangement & outer door openable hinged with locking arrangement having IP-43 protection complete all as specified and as directed. |
| 98 | S & F for MCB TPN 63 Amps 240 Volts C Curve 10 KA complete all as specified and as directed. |
| 99 | S & F for MCB SP 40 Amps 240 Volts C Curve 10 KA complete all as specified and as directed. |
| 100 | S & F for MCB SP 6-32 Amps 240 Volts C Curve 10 KA complete all as specified and as directed. |
| 101 | M & L for Sub main wiring with approved colour coding as per IS with 4 runs of single core PVC insulated cable FRLS with Multi Strand copper conductor of size 10Sq. mm and drawing into PVC conduit/ casing and capping including 2 runs of PVC insulated 10 sqmm stranded copper conductor earth wire complete all as specified and as directed. |
| 102 | M & L for Sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable FRLS with Multi Strand copper conductor of size 6 Sq. mm and drawing into PVC conduit/casing and capping including one run of PVC insulated 6 sqmm stranded copper conductor earth wire complete all as specified and as directed. |
| 103 | M & L for taking down split type AC of any capacity by disconnecting the existing cable connection, proper locking of refrigerant gas, kept in store and re-fiixing by connecting with AC metal box/Socket after wall panelling of the room including testing of AC at the satisfactory level complete all as specified and as directed. |
| 104 | M & L for disconnecting the connection existing XLPE UG cable of any cap or any size, removing from site and make good the surface area as exists all as specified and directed by Engr-in-charge |
| 105 | Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core.from walls, poles, trenches all as per directed and specified by Engr-in-charge |
| 106 | Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core.from walls, poles, trenches all as per directed and specified by Engr-in-charge |
| 107 | Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked IS 14390 part-II of outer dia 77mm and inner dia 63mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accesoories like coupler, \"O\" ring etc for protection of cable complete all as specified and directed |
| 108 | M & L for Earthing complete with galvanised steel earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground (earth pit not less than 2.25 metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected to GI earth wire 4 mm dia by means of GI bolts, nuts, check nuts and washers and earth strip protected by 25 mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on completion.Notes: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix, type B1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II and also refer Plate No-03.Earth strip and protection pipe beyond 7.5m shall be measured and paid separately. Note :- Earthing will be redone if desied erath result not found during testing of the same at site. |
